Spectrum FTT Weeks 1-3 Exam 2026
Questions and Answers
Your hard hat is intended to protect you from which of the following? - Correct
answer-Impact, penetration, and electric shock
Which standard is imprinted on glasses or goggles that meet safety
requirements? - Correct answer-ANSI Standard Z87.1-2010
Which items of PPE do you need under normal working conditions (not
climbing)? - Correct answer-Hard hat, safety glasses, safety vest, FVD, and gloves
Which items of PPE would you need when working aloft on a ladder? - Correct
answer-Hard hat, safety glasses, FVD, long-sleeved shirt, gloves, body belt,
positioning strap, and lineman's boots
What happens to leather when it is dried too fast in excessive heat? - Correct
answer-The leather curls and cracks
How do you measure for proper "D" size on a padded body belt? - Correct answer-
Measure hipbone to hipbone plus 2"
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
, Once at the working height, pass the positioning strap around the pole
and engage the single-sided end on the D-Ring with the mouth of the
snap hook _____________. - Correct answer-Outward
Always verify visually that the snap hook has engaged the
__________________. - Correct answer-D-Ring
You must document your monthly PPE inspection on the applicable
inspection form. - Correct answer-True
What type of safety vest is required? - Correct answer-Class 3
What is the minimum clearance of CATV cable from power at the pole? - Correct
answer-40 inches
What are the three indicators on the FVD? - Correct answer-10-step bar graph,
audible tone, and power indicator LED
To use the FVD, after the self-test process, continue to hold pressure on
the power switch and move the FVD: - Correct answer-Toward the object you want
to test
To replace the battery of the FVD, use this tool to pry the cover off the
back of the device: - Correct answer-Putty knife, coin or, small screwdriver
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
Questions and Answers
Your hard hat is intended to protect you from which of the following? - Correct
answer-Impact, penetration, and electric shock
Which standard is imprinted on glasses or goggles that meet safety
requirements? - Correct answer-ANSI Standard Z87.1-2010
Which items of PPE do you need under normal working conditions (not
climbing)? - Correct answer-Hard hat, safety glasses, safety vest, FVD, and gloves
Which items of PPE would you need when working aloft on a ladder? - Correct
answer-Hard hat, safety glasses, FVD, long-sleeved shirt, gloves, body belt,
positioning strap, and lineman's boots
What happens to leather when it is dried too fast in excessive heat? - Correct
answer-The leather curls and cracks
How do you measure for proper "D" size on a padded body belt? - Correct answer-
Measure hipbone to hipbone plus 2"
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
, Once at the working height, pass the positioning strap around the pole
and engage the single-sided end on the D-Ring with the mouth of the
snap hook _____________. - Correct answer-Outward
Always verify visually that the snap hook has engaged the
__________________. - Correct answer-D-Ring
You must document your monthly PPE inspection on the applicable
inspection form. - Correct answer-True
What type of safety vest is required? - Correct answer-Class 3
What is the minimum clearance of CATV cable from power at the pole? - Correct
answer-40 inches
What are the three indicators on the FVD? - Correct answer-10-step bar graph,
audible tone, and power indicator LED
To use the FVD, after the self-test process, continue to hold pressure on
the power switch and move the FVD: - Correct answer-Toward the object you want
to test
To replace the battery of the FVD, use this tool to pry the cover off the
back of the device: - Correct answer-Putty knife, coin or, small screwdriver
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
