P-99 Low Pressure Boiler COF FDNY Exam
Latest Update 2025\2026 With Complete
Questions and Correct Answers Graded A+
During operation the surface of combustible construction materials will not be
raised to a temp higher than _____ degrees F. - CORRECT ANSWER170
degrees
Equipment shall be so that the means of access for ordinary operation and
maintenance will not be _______. - CORRECT ANSWERHazardous
,Acceptance Tests:
Boilers shall not be placed in operation until they have been _____ and ____ and
an equipment ____ _____ has been issued by the ______. - CORRECT
ANSWERInspected and tested.
Use permit, commissioner
Periodic Inspections: All boilers must be inspected at least _____ a _____
including chimney connections. - CORRECT ANSWEROnce a year
A fill line in an oil burner system is a line used to: - CORRECT ANSWERFill the
storage tank with oil.
The aquastat is located - CORRECT ANSWERBelow the water line.
All heating, combustion, and cooking equipment shall be installed with adequate
clearances from _______ construction. - CORRECT ANSWERCombustible
The equipment must be provided with ______ or the building construction shall
be _____ _____. - CORRECT ANSWERInsulation.
Fire Protected
, Owners Annual Statement: The owner of each boiler shall file an _____ written
statement with the ________, specifying the _____of each boiler and ______ for
inspection. - CORRECT ANSWERAnnual, commissioner, location, arrangement.
Field Tests: all piping and oil storage tanks shall be _______ tested for tightness
by the ______ before the system is operated. - CORRECT
ANSWERHydrostatically, contractor
The piping shall be tested at _____ times the max working pressure applicable to
that part of the piping system but at a pressure ____ than the test pressure
required for the storage tank. - CORRECT ANSWER1/2, less
The min pressure for testing tanks shall be ____ times the max working pressure
but in no case less than ____ psi. - CORRECT ANSWER1 1/2, 25 psi
The hydrostatic pressure must be maintained until all ____ and _____ have been
visually inspected for ___, but in no case less than _____ hour. - CORRECT
ANSWERJoints, connections, leaks, 1/2 hour.
Latest Update 2025\2026 With Complete
Questions and Correct Answers Graded A+
During operation the surface of combustible construction materials will not be
raised to a temp higher than _____ degrees F. - CORRECT ANSWER170
degrees
Equipment shall be so that the means of access for ordinary operation and
maintenance will not be _______. - CORRECT ANSWERHazardous
,Acceptance Tests:
Boilers shall not be placed in operation until they have been _____ and ____ and
an equipment ____ _____ has been issued by the ______. - CORRECT
ANSWERInspected and tested.
Use permit, commissioner
Periodic Inspections: All boilers must be inspected at least _____ a _____
including chimney connections. - CORRECT ANSWEROnce a year
A fill line in an oil burner system is a line used to: - CORRECT ANSWERFill the
storage tank with oil.
The aquastat is located - CORRECT ANSWERBelow the water line.
All heating, combustion, and cooking equipment shall be installed with adequate
clearances from _______ construction. - CORRECT ANSWERCombustible
The equipment must be provided with ______ or the building construction shall
be _____ _____. - CORRECT ANSWERInsulation.
Fire Protected
, Owners Annual Statement: The owner of each boiler shall file an _____ written
statement with the ________, specifying the _____of each boiler and ______ for
inspection. - CORRECT ANSWERAnnual, commissioner, location, arrangement.
Field Tests: all piping and oil storage tanks shall be _______ tested for tightness
by the ______ before the system is operated. - CORRECT
ANSWERHydrostatically, contractor
The piping shall be tested at _____ times the max working pressure applicable to
that part of the piping system but at a pressure ____ than the test pressure
required for the storage tank. - CORRECT ANSWER1/2, less
The min pressure for testing tanks shall be ____ times the max working pressure
but in no case less than ____ psi. - CORRECT ANSWER1 1/2, 25 psi
The hydrostatic pressure must be maintained until all ____ and _____ have been
visually inspected for ___, but in no case less than _____ hour. - CORRECT
ANSWERJoints, connections, leaks, 1/2 hour.
