1|Page
Enphase Solar PV Installation Certification
Training | Comprehensive Key Questions
With Verified Answers
True or false: To prepare an AC Module for installation, the microinverter must be
pulled out from the mounting bracket and snapped into the installation ready
position.-correct-answer-True
What must you take in into consideration so that the inverter doesn't hit the rail
when mounting the module?
A. Placement of the serial number stickers
B. Module spacing
C. End clamps and mid clamps
D. Clamping range-correct-answer-D. Clamping range
What must be considered so microinverters don't hit rails when mounting AC
modules?
,2|Page
A. Concealed vs exposed end clamps and mid clamps
B. Placement of the serial number stickers
C. Module clamping areas and manufacturer allowable range
D. Module spacing-correct-answer-C. Module clamping areas and manufacturer
allowable range
The _____________ is used to connect the customer's site to Enlighten?
A. GPS route
B. Google maps picture
C. Installation map
D. Activation-correct-answer-D. Activation
Which of these best practices should be created prior to the day of installation?
,3|Page
A. Installation map
B. GPS route
C. Drawing of the home
D. Activation-correct-answer-D. Activation
It is a best practice to create the __________ prior to the day of installation.
A. Drawing of the as built circuits
B. Microinverter Installation map
C. Activation-correct-answer-C. Activation
What is a current transformer?
A. A current measuring device
, 4|Page
B. A device that measures DC voltage
C. A device that data to the microinverters-correct-answer-A. A current measuring
device
Select the parts of the CT (Select all that apply):
A. Core
B. Primary conductor
C. Secondary windings-correct-answer-A. Core
C. Secondary windings
True or false: The statement below describes how the CT functions.
AC current passes through a conductor routed though the CT. This produces an
alternating magnetic field in the core which induces an alternating current in the
secondary windings. The secondary wires are the blue and white wires connected
to the Envoy. The reduced or low voltage signal generated by current passing thru
the CT is how the Envoy measures AC current.-correct-answer-True
Enphase Solar PV Installation Certification
Training | Comprehensive Key Questions
With Verified Answers
True or false: To prepare an AC Module for installation, the microinverter must be
pulled out from the mounting bracket and snapped into the installation ready
position.-correct-answer-True
What must you take in into consideration so that the inverter doesn't hit the rail
when mounting the module?
A. Placement of the serial number stickers
B. Module spacing
C. End clamps and mid clamps
D. Clamping range-correct-answer-D. Clamping range
What must be considered so microinverters don't hit rails when mounting AC
modules?
,2|Page
A. Concealed vs exposed end clamps and mid clamps
B. Placement of the serial number stickers
C. Module clamping areas and manufacturer allowable range
D. Module spacing-correct-answer-C. Module clamping areas and manufacturer
allowable range
The _____________ is used to connect the customer's site to Enlighten?
A. GPS route
B. Google maps picture
C. Installation map
D. Activation-correct-answer-D. Activation
Which of these best practices should be created prior to the day of installation?
,3|Page
A. Installation map
B. GPS route
C. Drawing of the home
D. Activation-correct-answer-D. Activation
It is a best practice to create the __________ prior to the day of installation.
A. Drawing of the as built circuits
B. Microinverter Installation map
C. Activation-correct-answer-C. Activation
What is a current transformer?
A. A current measuring device
, 4|Page
B. A device that measures DC voltage
C. A device that data to the microinverters-correct-answer-A. A current measuring
device
Select the parts of the CT (Select all that apply):
A. Core
B. Primary conductor
C. Secondary windings-correct-answer-A. Core
C. Secondary windings
True or false: The statement below describes how the CT functions.
AC current passes through a conductor routed though the CT. This produces an
alternating magnetic field in the core which induces an alternating current in the
secondary windings. The secondary wires are the blue and white wires connected
to the Envoy. The reduced or low voltage signal generated by current passing thru
the CT is how the Envoy measures AC current.-correct-answer-True
