Construction Quality Tests UPDATED ACTUAL Questions and CORRECT
Answers
Additional cores for deficient pavement
Quality tests
Cellulose fibers in SMA mixtures
Non-Destructive Test Methods
Slump test
Stability Test
Plastic limit
Specimens removal for strength test
Paint quality test submission
Reflectorized thermoplastic ruble strips
Fly ash PCCP
Liquefaction
Water quality test elements
D.O. 253
Minimum rivets/bolts for testing
Abrasion Loss test
SMA mixture temperature
Flexural strength calculation
, Concrete Batching Plants.
Tests performed to ensure the quality
of materials or con-struction work. The minimum number is 5 pieces.
Usually added in the amount of 0.30 Sample is screened on Sieve #10.
to 0.40 percent byweight. Shall be placed at a temperature of 105°C to 180°C.
Examples include Rebound Hammer Flexural strength is 570 psi.
and X-Ray Test.
Cores are taken at 5-meter intervals from the affected
Measures the workability of concrete
location.
mixture; types in-clude Shear,
Collapse, True, and False slump.
Sample is submerged in a water bath
at 60 degrees Cel-sius.
The diameter of the thread soil
sample is 1/8 in. Specimens are
removed from molds after 24 hours.
2 gallons of each type of paint are
submitted for qualitytest.
Placement should be limited to
Rural Locations.
Used to increase the strength
of concrete.
The phenomenon where soil
subgrade loses strength dueto
ground shaking and fine grained
soil.
Chloride and Sulphates are
checked.
Prescribes Guidelines for
Accreditation for Asphalt and
2/7
Answers
Additional cores for deficient pavement
Quality tests
Cellulose fibers in SMA mixtures
Non-Destructive Test Methods
Slump test
Stability Test
Plastic limit
Specimens removal for strength test
Paint quality test submission
Reflectorized thermoplastic ruble strips
Fly ash PCCP
Liquefaction
Water quality test elements
D.O. 253
Minimum rivets/bolts for testing
Abrasion Loss test
SMA mixture temperature
Flexural strength calculation
, Concrete Batching Plants.
Tests performed to ensure the quality
of materials or con-struction work. The minimum number is 5 pieces.
Usually added in the amount of 0.30 Sample is screened on Sieve #10.
to 0.40 percent byweight. Shall be placed at a temperature of 105°C to 180°C.
Examples include Rebound Hammer Flexural strength is 570 psi.
and X-Ray Test.
Cores are taken at 5-meter intervals from the affected
Measures the workability of concrete
location.
mixture; types in-clude Shear,
Collapse, True, and False slump.
Sample is submerged in a water bath
at 60 degrees Cel-sius.
The diameter of the thread soil
sample is 1/8 in. Specimens are
removed from molds after 24 hours.
2 gallons of each type of paint are
submitted for qualitytest.
Placement should be limited to
Rural Locations.
Used to increase the strength
of concrete.
The phenomenon where soil
subgrade loses strength dueto
ground shaking and fine grained
soil.
Chloride and Sulphates are
checked.
Prescribes Guidelines for
Accreditation for Asphalt and
2/7
