Humber Real Estate - Course 4, Module
2: Understanding Commercial
Construction Exam 2026 Questions and
Answers
Industrial buildings range from warehouses that are typically 25,000 to 100,000
square feet, to a ________________________. - Correct answer-7500 acre oil
refinery
What 3 categories are industrial properties divided into? - Correct answer--
General Purpose
- Special Purpose
- Single Purpose
Industrial properties are typically constructed with
____________________________, or a combination. - Correct answer-Concrete
block, poured concrete, steel
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
,Block buildings, often with _________ facing on the front and two sides, are a
favourable choice for buyers, but ___________________ buildings generally
dominate industrial structures - Correct answer-Brick, steel constructed
The requirements under the Ontario Building Code for industrial buildings are
______________________. - Correct answer-"Use" dependant
What kind of construction could be characterized by
______________________________ with drywall interiors? - Correct answer-
Framed support walls, a pitched roof, brick/stone/siding finished exterior
Some farm buildings are designed for the storage of fertilizers and manure, and
may have to comply with not only the Ontario Building Code but also the
________________________. - Correct answer-National Farm Building Code
Why might commercial property owners favour masonry walls? - Correct answer-
Because they increase the thermal mass of a building and are energy efficient if
suitable exterior coating is applied.
Wood framing is usually the most ______________ method. - Correct answer-
Economical
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
, In larger commercial structures, concrete block walls may be used with
______________________ to more effectively separate units for added structural
mass, as well as fire requirements. - Correct answer-Wood framing
What kind of construction is more cost-effective for larger structures, in
comparison to masonry or steel? - Correct answer-Tilt-up
Insulated Concrete Form (ICF) products have thermal mass and high insulation
values that _______________________________. - Correct answer-Reduce
energy cost
Insulated Concrete Form is a framework of concrete protected by
____________________________________. - Correct answer-Two layers of
thermal insulation
Note: The insulation stays in place as a permanent interior and exterior layer for
walls, floors and roofs.
Steel is more commonly used with concrete wall systems to gain more
_____________. - Correct answer-Flexibiity
©COPYRIGHT 2025, ALL RIGHTS RESERVED 3
2: Understanding Commercial
Construction Exam 2026 Questions and
Answers
Industrial buildings range from warehouses that are typically 25,000 to 100,000
square feet, to a ________________________. - Correct answer-7500 acre oil
refinery
What 3 categories are industrial properties divided into? - Correct answer--
General Purpose
- Special Purpose
- Single Purpose
Industrial properties are typically constructed with
____________________________, or a combination. - Correct answer-Concrete
block, poured concrete, steel
©COPYRIGHT 2025, ALL RIGHTS RESERVED 1
,Block buildings, often with _________ facing on the front and two sides, are a
favourable choice for buyers, but ___________________ buildings generally
dominate industrial structures - Correct answer-Brick, steel constructed
The requirements under the Ontario Building Code for industrial buildings are
______________________. - Correct answer-"Use" dependant
What kind of construction could be characterized by
______________________________ with drywall interiors? - Correct answer-
Framed support walls, a pitched roof, brick/stone/siding finished exterior
Some farm buildings are designed for the storage of fertilizers and manure, and
may have to comply with not only the Ontario Building Code but also the
________________________. - Correct answer-National Farm Building Code
Why might commercial property owners favour masonry walls? - Correct answer-
Because they increase the thermal mass of a building and are energy efficient if
suitable exterior coating is applied.
Wood framing is usually the most ______________ method. - Correct answer-
Economical
©COPYRIGHT 2025, ALL RIGHTS RESERVED 2
, In larger commercial structures, concrete block walls may be used with
______________________ to more effectively separate units for added structural
mass, as well as fire requirements. - Correct answer-Wood framing
What kind of construction is more cost-effective for larger structures, in
comparison to masonry or steel? - Correct answer-Tilt-up
Insulated Concrete Form (ICF) products have thermal mass and high insulation
values that _______________________________. - Correct answer-Reduce
energy cost
Insulated Concrete Form is a framework of concrete protected by
____________________________________. - Correct answer-Two layers of
thermal insulation
Note: The insulation stays in place as a permanent interior and exterior layer for
walls, floors and roofs.
Steel is more commonly used with concrete wall systems to gain more
_____________. - Correct answer-Flexibiity
©COPYRIGHT 2025, ALL RIGHTS RESERVED 3
