NYC FLSD TEST Exam REVIEW WITH
EXAM QUESTIONS AND CORRECT
SOLUTIONS A+ GRADED UPDATED
2025/2026 SYLLABUS!!!100%
GUARANTEED PASS!!<BRAND NEW
VERSION>
In fire prevention there are three areas to consider: - ANSWER ✓ Education
(building tenants)
Engineering (layout, suppression systems etc)
Enforcement(Building codes, Fire codes)
Fire Drill Frequency for Group B - ANSWER ✓ Twice a year
Fire Drill Frequency for Group R1 - ANSWER ✓ Quarterly each year
Refresher training for Group B - ANSWER ✓ 1 hour annually (training)
Refresher Training for Group R1 - ANSWER ✓ 1 hour quarterly on each shift
The fire alarm system on your buildings 4th floor has stop functioning. In this
case, the fire alarm system would be deemed: - ANSWER ✓ out-of-service
It shall be unlawful to transmit unnecessary or unwarranted alarms in any six-
month period if the amount of those alarms is: - ANSWER ✓ three or more
114. Installations of a Clean Agent fire extinguishing systems may be accepted by
the Fire Commissioner pursuant to §27-404 of the Administrative Code where the
nature of the fire hazard is such that
A. halon is not effective as an extinguishing agent
,B. steam is not effective as an extinguishing agent
C. water is not effective as an extinguishing agent
D. carbon dioxide is not effective as an extinguishing agent - ANSWER ✓ C.
water is not effective as an extinguishing agent
115. The use of Freon FE-1301 (Halon 1301) as a fire extinguishing agent shall be
limited to its use for automatic total flooding systems for interior with provision for
sufficient "soaking" time where Class A or deep seated fires are to be extinguished;
A. Class A or B fires
B. Class A, B or C fires
C. Class A or C fires
D. Class A, B, C or D fires - ANSWER ✓ B. Class A, B or C fires
117.In a siamese connection, whats the name of the device between the check
valve and the outside hose coupling that prevents water from building up in the
piping? This device makes sure that the Fire Department connection is not blocked
by water which has frozen in the piping.
A. the automatic ball drip
B. the anti-drip valve
C. the automatic drain valve
D. the automatic joint drip - ANSWER ✓ A. the automatic ball drip
118. The hose in a standpipe system is usually stored
A. on a quick release reel
B. on a quick release table
C. on a quick release hanger
,D. on a quick release rack - ANSWER ✓ D. on a quick release rack
119. When standpipe system hose outlets are not easy to see, what should be
done?
A. memos should be distributed to all building tenants and new tenants
B. signs should be posted telling where the hose outlets are located
C. notification telephone calls should be made to each tenant
D. notification e-mails should be sent to each tenant, regularly - ANSWER ✓ B.
signs should be posted telling where the hose outlets are located
120. OS&Y (Outside Screw and Yoke) gate valves are installed at several places
in a standpipe system, and can be used to shut down just a part of the standpipe
system. If the stem is flush with the control wheel the valve is
A. opened
B. ½ closed
C. closed
D. inoperable - ANSWER ✓ C. closed
121. A gravity tank system delivers water from the tank through the standpipe
system without the use of pumping equipment. A gravity tank should be at least
how many feet above the highest standpipe hose outlet that it supplies?
A. 25 feet
B. 30 feet
C. 35 feet
D. 45 feet - ANSWER ✓ A. 25 feet
, 122. Fire pumps are designed to take the water from a supply source and then
discharge the water into the standpipe or sprinkler system under pressure. The
pressure with which the water is discharged from the pump is called the
A. discharge pressure
B. outbound head
C. primary head pressure
D. total head - ANSWER ✓ D. total head
123. A fire pump is usually connected to what for most of its water supply?
A. a suction tank
B. a gravity tank
C. the building water tank
D. the public water main - ANSWER ✓ D. the public water main
124. Acceptable fire pumps must deliver a minimum of at least how many pounds
per square inch at the highest line of sprinkler heads or the highest line of hoses in
a standpipe system?
A. 35 psi
B. 25 psi
C. 20 psi
D. none of the above - ANSWER ✓ B. 25 psi
125. Which type of fire pump is the standard pump used in most fire protection
systems? It is the preferred pump because it is reliable, compact, and requires little
maintenance. And it can be powered by a variety of drivers including electric
motors, internal combustion engines, and steam turbines.
EXAM QUESTIONS AND CORRECT
SOLUTIONS A+ GRADED UPDATED
2025/2026 SYLLABUS!!!100%
GUARANTEED PASS!!<BRAND NEW
VERSION>
In fire prevention there are three areas to consider: - ANSWER ✓ Education
(building tenants)
Engineering (layout, suppression systems etc)
Enforcement(Building codes, Fire codes)
Fire Drill Frequency for Group B - ANSWER ✓ Twice a year
Fire Drill Frequency for Group R1 - ANSWER ✓ Quarterly each year
Refresher training for Group B - ANSWER ✓ 1 hour annually (training)
Refresher Training for Group R1 - ANSWER ✓ 1 hour quarterly on each shift
The fire alarm system on your buildings 4th floor has stop functioning. In this
case, the fire alarm system would be deemed: - ANSWER ✓ out-of-service
It shall be unlawful to transmit unnecessary or unwarranted alarms in any six-
month period if the amount of those alarms is: - ANSWER ✓ three or more
114. Installations of a Clean Agent fire extinguishing systems may be accepted by
the Fire Commissioner pursuant to §27-404 of the Administrative Code where the
nature of the fire hazard is such that
A. halon is not effective as an extinguishing agent
,B. steam is not effective as an extinguishing agent
C. water is not effective as an extinguishing agent
D. carbon dioxide is not effective as an extinguishing agent - ANSWER ✓ C.
water is not effective as an extinguishing agent
115. The use of Freon FE-1301 (Halon 1301) as a fire extinguishing agent shall be
limited to its use for automatic total flooding systems for interior with provision for
sufficient "soaking" time where Class A or deep seated fires are to be extinguished;
A. Class A or B fires
B. Class A, B or C fires
C. Class A or C fires
D. Class A, B, C or D fires - ANSWER ✓ B. Class A, B or C fires
117.In a siamese connection, whats the name of the device between the check
valve and the outside hose coupling that prevents water from building up in the
piping? This device makes sure that the Fire Department connection is not blocked
by water which has frozen in the piping.
A. the automatic ball drip
B. the anti-drip valve
C. the automatic drain valve
D. the automatic joint drip - ANSWER ✓ A. the automatic ball drip
118. The hose in a standpipe system is usually stored
A. on a quick release reel
B. on a quick release table
C. on a quick release hanger
,D. on a quick release rack - ANSWER ✓ D. on a quick release rack
119. When standpipe system hose outlets are not easy to see, what should be
done?
A. memos should be distributed to all building tenants and new tenants
B. signs should be posted telling where the hose outlets are located
C. notification telephone calls should be made to each tenant
D. notification e-mails should be sent to each tenant, regularly - ANSWER ✓ B.
signs should be posted telling where the hose outlets are located
120. OS&Y (Outside Screw and Yoke) gate valves are installed at several places
in a standpipe system, and can be used to shut down just a part of the standpipe
system. If the stem is flush with the control wheel the valve is
A. opened
B. ½ closed
C. closed
D. inoperable - ANSWER ✓ C. closed
121. A gravity tank system delivers water from the tank through the standpipe
system without the use of pumping equipment. A gravity tank should be at least
how many feet above the highest standpipe hose outlet that it supplies?
A. 25 feet
B. 30 feet
C. 35 feet
D. 45 feet - ANSWER ✓ A. 25 feet
, 122. Fire pumps are designed to take the water from a supply source and then
discharge the water into the standpipe or sprinkler system under pressure. The
pressure with which the water is discharged from the pump is called the
A. discharge pressure
B. outbound head
C. primary head pressure
D. total head - ANSWER ✓ D. total head
123. A fire pump is usually connected to what for most of its water supply?
A. a suction tank
B. a gravity tank
C. the building water tank
D. the public water main - ANSWER ✓ D. the public water main
124. Acceptable fire pumps must deliver a minimum of at least how many pounds
per square inch at the highest line of sprinkler heads or the highest line of hoses in
a standpipe system?
A. 35 psi
B. 25 psi
C. 20 psi
D. none of the above - ANSWER ✓ B. 25 psi
125. Which type of fire pump is the standard pump used in most fire protection
systems? It is the preferred pump because it is reliable, compact, and requires little
maintenance. And it can be powered by a variety of drivers including electric
motors, internal combustion engines, and steam turbines.
