Written by students who passed Immediately available after payment Read online or as PDF Wrong document? Swap it for free 4.6 TrustPilot
logo-home
Document preview thumbnail
Preview 2 out of 6 pages
Exam (elaborations)

2A HOISTING QUESTION PAPER 2025 DETAILED REVIEW GUIDE WITH 100% CORRECT ANSWERS

Document preview thumbnail
Preview 2 out of 6 pages

2A HOISTING QUESTION PAPER 2025 DETAILED REVIEW GUIDE WITH 100% CORRECT ANSWERS

Content preview

2A HOISTING QUESTION PAPER 2025 DETAILED REVIEW
GUIDE WITH 100% CORRECT ANSWERS
✔✔PSI - ✔✔Professional service industry

✔✔Pile must be a minimumof - ✔✔2 feet from excavation

✔✔Angle of repose should be - ✔✔Shallow

✔✔Work bank or stock pile at - ✔✔A 90 degree angle

✔✔To correct a rear wheel (drive wheel) braking skid you shuold - ✔✔Release the
brakes and accelerate

✔✔The purpose of a baffle is to - ✔✔Control the load surge

✔✔You must park on the side of a level straight two lane road where you place the
three reflective triangles - ✔✔One within 10 feet of the rear of the vehicle one about 100
feet to the rear and one about 100 feet from the front of the vehicle

✔✔You must park on the side level straight four lane divided highway where should you
place the three reflective triangles - ✔✔One withing 10 feet ofbthe rear of the vehicle
one about 100 feet to the rear and one about 200 feet to the rear

✔✔Brake fade - ✔✔Can be caused by the brakes becoming too hot

✔✔ One light - ✔✔Stop

✔✔Two lights - ✔✔Raise

✔✔Three lights - ✔✔Lower

✔✔Four lights - ✔✔Lower slowly

✔✔Four classes of license - ✔✔Hoisting, excavating, air, and electrical specialty

✔✔2000-3000 pounds - ✔✔Average hydraulic pressure in hoisting equipment

, ✔✔2 years - ✔✔Licenses expire every two years

✔✔S.A.E hand signals will be used - ✔✔With excavating machinery

✔✔34 degrees - ✔✔Slope angle for type A soil

✔✔45 degrees - ✔✔Slope for type b soil

✔✔53 degrees - ✔✔Slope for type c soil

✔✔25 inches - ✔✔Max distance between ladders in a trench

✔✔20 inches - ✔✔Below 20 inches all trench protection must be engineered

✔✔5 inches - ✔✔Trench protection is needed at or below this depth sloping

✔✔4 inches - ✔✔Ladder egress from trenches at or below 4 inches

✔✔3 inches - ✔✔Jackie's law depth at which a permit must be pulled

✔✔27 cu/ ft - ✔✔In one cubuc yard

✔✔5 mph - ✔✔When pulling a piece of equipment do not exceed this speed

✔✔18 inches - ✔✔Do not dig closer than 18 inches to a known utility

✔✔72 hours - ✔✔Dig safe notice

✔✔14 days - ✔✔Exemption for short term rental non commercial use

✔✔CMR - ✔✔Commonwealth of mass regulation

✔✔CFR - ✔✔Code of federal regulation

✔✔ANSI - ✔✔American national standart institute

✔✔Red - ✔✔Electric

✔✔Orange - ✔✔Tell data

Document information

Uploaded on
September 22, 2025
Number of pages
6
Written in
2025/2026
Type
Exam (elaborations)
Contains
Questions & answers
$12.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
FocusFile7
3.9
(23)
Sold
221
Followers
3
Items
54806
Last sold
14 hours ago


Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions