FIREFIGHTING FINAL EXAM WITH 100% CORRECT ANSWERS (2025/2026)

FIREFIGHTING FINAL EXAM WITH 100% CORRECT ANSWERS (2025/2026) All PPE designed for structural firefighting must meet the requirements of - answer-NFPA 1971 Which piece of PPE is donned under the helmet and is designed to protect the neck, ears, and face from exposure to heat, embers, and debris? - answer-Protective hood Which statement about structural firefighting protective coats is accurate? - answer-The outer shell, moisture barrier, and thermal barrier must always be worn together. Protective trousers designed for firefighting are: - answer-constructed from the same fabric, moisture barrier, and thermal layering used in protective coats. When properly worn, firefighting gloves: - answer-must completely cover the wristlet of the protective coat. Personal alert safety system (PASS) alarms are designed to activate when - answer-a firefighter is motionless for more than 30 seconds. What should be done during routine inspections of PPE, such as after use at an incident? - answer-Look for damage like rips or tears SCBA can help protect from _____, which can be caused by inhaling heated gases. - answer-asphyxiation The SCBA backplate and harness assembly: - answer-is used to hold the breathing air cylinder.Immediately prior to donning SCBA, firefighters should: - answer-check the cylinder gauge to make sure the cylinder is full.