Ammo CDC's set B Exam| Questions with Correct Answers|
Verified|Latest Update
Before using an electric drill, what is the first thing you should do? - ✔✔Make sure the
diameter of the hole to be drilled is within the capacity of the drill
The purpose of cutting lubricant in most drilling ops is to increase the - ✔✔Drilling speed
and drill bit life
Minimum protection using a bench grinder - ✔✔eye and face protection
what condition would prevent an operator from applying power to a hoist or other powered
lifting device - ✔✔an AF Form 979
most common type of lifting sling - ✔✔wire rope
the enunciators displayed on the fluke 8025 series multimeter are used to distinguish
among - ✔✔ohms, kilohm, and megohms
2 operational modes of the Fluke 8025 - ✔✔range and hold
the steering system on the MHU 141/ M trailer has a turning radius of how many inches -
✔✔200
When the MHU 141 trailer is loaded or towed with the hinged deck panels open, what must
be done? - ✔✔the deck supports must be properly positioned and locked in place with quick
release pins
Max load capacity of the MHU 110/ M trailer - ✔✔15,000
the parking brake on the MHU 110/ M is applied by - ✔✔pulling either one of two hand
levers located on each side of the front of trailer
,how many openings are on the deck of the MHU- 226 trailer - ✔✔3
what type of steering aids the MHU- 226 - ✔✔four wheeled double ackerman
After 463L pallets are positioned on a rollerized trailer, what can you use to secure the
pallets - ✔✔MB-1 chain assemblies and or tie down straps
what kind of movements supports on base activities to or from the flightline -
✔✔operational
what munitions item is not loaded into transport modules by munitions personnel - ✔✔20
mm
what transport module used for decoy munitions has a max capacity of 30 magazines -
✔✔ALE- 50
How often should the positive locking devices on the doors of munitions transport modules
be checked - ✔✔after loading, unloading and periodically between stops
the purpose of the transport beam beneath the lift arm assemblies on the MJ- 1 series lift
truck is to - ✔✔provide added support and to relieve hydraulic pressure from the lift arms
when carrying loads for long distances
Lifting capacity of the MJ 1 series lift truck - ✔✔3,000
Lifting capacity of MHU 83 lift truck - ✔✔7,000
When using fork adapters on MHU 83 series lift truck - ✔✔it reduces lifting capacity by
1,000
, What happens when you release the accelerator pedal on a vehicle driven with a hydrostatic
transmission - ✔✔the unit coasts to a stop very quickly
what is the primary drawback to using the hydraulic hand pump to build hydraulic pressure
on the MHU 83 lift truck - ✔✔extremely slow way to build hydraulic pressure
How is the yaw positioning from the cradle or boom controls of an MJ 1 lift truck adjusted -
✔✔Manually
what category are Air Force air compressors classified? - ✔✔high or low pressure
what is the purpose behind good operator maintenance of all assigned vehicles -
✔✔maintain vehicle serviceability at reduced cost
max amount thee MB 4 aircraft towing tractor can tow - ✔✔140,000
pintle safety locking pins must remain attached to the pintle assembly - ✔✔to prevent an
insecure pin from coming out and getting lost
what gear should a tractor with automatic transmission while going downhill - ✔✔low
what are hose couplers used for on tractor trailer combination - ✔✔to connect the service
and emergency brake airlines from the tractor to the trailer
which procedure is not a consideration for backing a tractor trailer combination - ✔✔turn
towards the passengers side
with the forks level, what is the maximum reach of the variable reach forklift - ✔✔22 feet
what USAF gun system is loaded and unloaded by the Linkless Ammo Loading System (LALS)
- ✔✔the M61A1, 20mm cannon
Verified|Latest Update
Before using an electric drill, what is the first thing you should do? - ✔✔Make sure the
diameter of the hole to be drilled is within the capacity of the drill
The purpose of cutting lubricant in most drilling ops is to increase the - ✔✔Drilling speed
and drill bit life
Minimum protection using a bench grinder - ✔✔eye and face protection
what condition would prevent an operator from applying power to a hoist or other powered
lifting device - ✔✔an AF Form 979
most common type of lifting sling - ✔✔wire rope
the enunciators displayed on the fluke 8025 series multimeter are used to distinguish
among - ✔✔ohms, kilohm, and megohms
2 operational modes of the Fluke 8025 - ✔✔range and hold
the steering system on the MHU 141/ M trailer has a turning radius of how many inches -
✔✔200
When the MHU 141 trailer is loaded or towed with the hinged deck panels open, what must
be done? - ✔✔the deck supports must be properly positioned and locked in place with quick
release pins
Max load capacity of the MHU 110/ M trailer - ✔✔15,000
the parking brake on the MHU 110/ M is applied by - ✔✔pulling either one of two hand
levers located on each side of the front of trailer
,how many openings are on the deck of the MHU- 226 trailer - ✔✔3
what type of steering aids the MHU- 226 - ✔✔four wheeled double ackerman
After 463L pallets are positioned on a rollerized trailer, what can you use to secure the
pallets - ✔✔MB-1 chain assemblies and or tie down straps
what kind of movements supports on base activities to or from the flightline -
✔✔operational
what munitions item is not loaded into transport modules by munitions personnel - ✔✔20
mm
what transport module used for decoy munitions has a max capacity of 30 magazines -
✔✔ALE- 50
How often should the positive locking devices on the doors of munitions transport modules
be checked - ✔✔after loading, unloading and periodically between stops
the purpose of the transport beam beneath the lift arm assemblies on the MJ- 1 series lift
truck is to - ✔✔provide added support and to relieve hydraulic pressure from the lift arms
when carrying loads for long distances
Lifting capacity of the MJ 1 series lift truck - ✔✔3,000
Lifting capacity of MHU 83 lift truck - ✔✔7,000
When using fork adapters on MHU 83 series lift truck - ✔✔it reduces lifting capacity by
1,000
, What happens when you release the accelerator pedal on a vehicle driven with a hydrostatic
transmission - ✔✔the unit coasts to a stop very quickly
what is the primary drawback to using the hydraulic hand pump to build hydraulic pressure
on the MHU 83 lift truck - ✔✔extremely slow way to build hydraulic pressure
How is the yaw positioning from the cradle or boom controls of an MJ 1 lift truck adjusted -
✔✔Manually
what category are Air Force air compressors classified? - ✔✔high or low pressure
what is the purpose behind good operator maintenance of all assigned vehicles -
✔✔maintain vehicle serviceability at reduced cost
max amount thee MB 4 aircraft towing tractor can tow - ✔✔140,000
pintle safety locking pins must remain attached to the pintle assembly - ✔✔to prevent an
insecure pin from coming out and getting lost
what gear should a tractor with automatic transmission while going downhill - ✔✔low
what are hose couplers used for on tractor trailer combination - ✔✔to connect the service
and emergency brake airlines from the tractor to the trailer
which procedure is not a consideration for backing a tractor trailer combination - ✔✔turn
towards the passengers side
with the forks level, what is the maximum reach of the variable reach forklift - ✔✔22 feet
what USAF gun system is loaded and unloaded by the Linkless Ammo Loading System (LALS)
- ✔✔the M61A1, 20mm cannon
