DANB RHS STUDY QUESTIONS AND ANSWERS LATEST
DOWNLOADED 2025/20256 A COMPLETE SOLUTION ALL
ANSWERS GET IT 100% ACCURATE BEST GRADED A+
FOR SUCCESS
how does the use of photostimulable storage phosphor (PSP) plates affect digital radiography?
a. PSP plates are the thickest form of sensor and are the most uncomfortable to the patient
b. PSP plates allow for heat sterilization, making infection control easier to manage
c. PSP plates provide slightly more radiation exposure to the patient than traditional Dental film
d. PSP plates do not offer a media access to the digital image - CORRECT ANSWERS d
which of the following is not a disadvantage of digital radiography?
a. infection control issues
b. lost images
c. cost for purchasing Digital Imaging equipment
d. training - CORRECT ANSWERS b
the use of outdated Dental film may cause an x-ray to have:
a. partially missing image
b. white spots on the film
c. a foggy or great appearance
d. appearance of streaks on final film - CORRECT ANSWERS c
which of the following would not be a reason for the dental x-ray image to come out black?
a. processing time is too short
b. temperature is too warm
c. film has been exposed to white light
, DANB RHS STUDY QUESTIONS AND ANSWERS LATEST
DOWNLOADED 2025/20256 A COMPLETE SOLUTION ALL
ANSWERS GET IT 100% ACCURATE BEST GRADED A+
FOR SUCCESS
d. damaged Safelight - CORRECT ANSWERS a
what will happen to an x-ray film that is left in the processing solution too long?
a. there will be white spots on the X-ray
b. there will be dark spots on the final image
c. the image will be either partially or completely missing
d. the X-ray will appear yellowish Brown - CORRECT ANSWERS c
a dental x-ray that has the appearance of black lines that look like a tree branch is caused by:
a. overlapped films
b. static electricity
c. overexposure
d. air bubbles - CORRECT ANSWERS b
what type of chemical is used in the developing agent to convert the silver halide crystals to
Black?
a. potassium bromide
b. sodium sulfate
c. acetic acid
d. hydroquinone - CORRECT ANSWERS d
during manual processing, how long should the film remain in the developer solution if the
temperature of the solution is 65 degrees Fahrenheit?
a. 8 minutes
DOWNLOADED 2025/20256 A COMPLETE SOLUTION ALL
ANSWERS GET IT 100% ACCURATE BEST GRADED A+
FOR SUCCESS
how does the use of photostimulable storage phosphor (PSP) plates affect digital radiography?
a. PSP plates are the thickest form of sensor and are the most uncomfortable to the patient
b. PSP plates allow for heat sterilization, making infection control easier to manage
c. PSP plates provide slightly more radiation exposure to the patient than traditional Dental film
d. PSP plates do not offer a media access to the digital image - CORRECT ANSWERS d
which of the following is not a disadvantage of digital radiography?
a. infection control issues
b. lost images
c. cost for purchasing Digital Imaging equipment
d. training - CORRECT ANSWERS b
the use of outdated Dental film may cause an x-ray to have:
a. partially missing image
b. white spots on the film
c. a foggy or great appearance
d. appearance of streaks on final film - CORRECT ANSWERS c
which of the following would not be a reason for the dental x-ray image to come out black?
a. processing time is too short
b. temperature is too warm
c. film has been exposed to white light
, DANB RHS STUDY QUESTIONS AND ANSWERS LATEST
DOWNLOADED 2025/20256 A COMPLETE SOLUTION ALL
ANSWERS GET IT 100% ACCURATE BEST GRADED A+
FOR SUCCESS
d. damaged Safelight - CORRECT ANSWERS a
what will happen to an x-ray film that is left in the processing solution too long?
a. there will be white spots on the X-ray
b. there will be dark spots on the final image
c. the image will be either partially or completely missing
d. the X-ray will appear yellowish Brown - CORRECT ANSWERS c
a dental x-ray that has the appearance of black lines that look like a tree branch is caused by:
a. overlapped films
b. static electricity
c. overexposure
d. air bubbles - CORRECT ANSWERS b
what type of chemical is used in the developing agent to convert the silver halide crystals to
Black?
a. potassium bromide
b. sodium sulfate
c. acetic acid
d. hydroquinone - CORRECT ANSWERS d
during manual processing, how long should the film remain in the developer solution if the
temperature of the solution is 65 degrees Fahrenheit?
a. 8 minutes
