OSHA 511 FINAL TEST GENERAL INDUSTRY WITH ALL
CORRECT & 100% VERIFIED ANSWERS|ALREADY
GRADED A+
Section 11- Judicial review ✔Correct Answer-11 (c) Prohibits discrimination against employees
filing complaints under OSHA, or for disclosing safety and health issues concerning the workplace.
i. Key word- Whistle Blower Act
Horizontal and Vertical Standards ✔Correct Answer-a. Horizontal - everyone is covered
i. Key word - applies to any/all employer in any industry ("general or "across the board")
b. Vertical - Welding is an example of vertical standards
i. Key word- applies to a specific/ particular industry
Incorporation by Reference ✔Correct Answer-a. OSHA Directives- Compliance directives - guide
book
i. Enforcement and Compliance Directives (CPL)
ii. Letters of Interpretation
iii. Federal Register
Definitions 1910.21 ✔Correct Answer-a. "Floor Hole" an opening less than 12" but more than 1
inch in its dimension, in any floor, platform, pavement or yard, through which materials but not
persons may fall; such as a belt hole, pipe opening or slot opening.
b. "Floor Opening" an opening measuring 12 inches or MORE in its dimension
i. Key word - an OPENING is larger than a HOLE
Fixed Industrial stairs ✔Correct Answer-a. Egress route for a staircase platforms must be 28" min
Osha certifies that a citation must be ✔Correct Answer-a. Addressed and corrections must be
completed by the abatement date
b. OSHA has 180 days to issue citation
Cages or Wells 1910.27 (d) (1) ✔Correct Answer-a. Cages or wells shall be provided on Ladders
more than 20 feet to a maximum unbroken length of 30 feet.
Section 5 (a) (1) of the Act ✔Correct Answer-a. Every employer shall furnish to his employee's
employment and a place of employment which are free from recognized hazards that are causing or
likely to cause death or serious physical harm to his employees.
i. Key word - General Duty Clause
OSHA inspection Priority Review ✔Correct Answer-1st Imminent danger
2nd Catastrophes and fatal accidents
3rd Employee complaints and referrals
4th Programmed High- Hazard Inspections
5th Follow up Inspections
Inspector Credentials ✔Correct Answer-(In addition to the presentation of credentials, the
inspection process includes)
a. Opening Conference
b. Walk around inspection
c. Closing Conference
CORRECT & 100% VERIFIED ANSWERS|ALREADY
GRADED A+
Section 11- Judicial review ✔Correct Answer-11 (c) Prohibits discrimination against employees
filing complaints under OSHA, or for disclosing safety and health issues concerning the workplace.
i. Key word- Whistle Blower Act
Horizontal and Vertical Standards ✔Correct Answer-a. Horizontal - everyone is covered
i. Key word - applies to any/all employer in any industry ("general or "across the board")
b. Vertical - Welding is an example of vertical standards
i. Key word- applies to a specific/ particular industry
Incorporation by Reference ✔Correct Answer-a. OSHA Directives- Compliance directives - guide
book
i. Enforcement and Compliance Directives (CPL)
ii. Letters of Interpretation
iii. Federal Register
Definitions 1910.21 ✔Correct Answer-a. "Floor Hole" an opening less than 12" but more than 1
inch in its dimension, in any floor, platform, pavement or yard, through which materials but not
persons may fall; such as a belt hole, pipe opening or slot opening.
b. "Floor Opening" an opening measuring 12 inches or MORE in its dimension
i. Key word - an OPENING is larger than a HOLE
Fixed Industrial stairs ✔Correct Answer-a. Egress route for a staircase platforms must be 28" min
Osha certifies that a citation must be ✔Correct Answer-a. Addressed and corrections must be
completed by the abatement date
b. OSHA has 180 days to issue citation
Cages or Wells 1910.27 (d) (1) ✔Correct Answer-a. Cages or wells shall be provided on Ladders
more than 20 feet to a maximum unbroken length of 30 feet.
Section 5 (a) (1) of the Act ✔Correct Answer-a. Every employer shall furnish to his employee's
employment and a place of employment which are free from recognized hazards that are causing or
likely to cause death or serious physical harm to his employees.
i. Key word - General Duty Clause
OSHA inspection Priority Review ✔Correct Answer-1st Imminent danger
2nd Catastrophes and fatal accidents
3rd Employee complaints and referrals
4th Programmed High- Hazard Inspections
5th Follow up Inspections
Inspector Credentials ✔Correct Answer-(In addition to the presentation of credentials, the
inspection process includes)
a. Opening Conference
b. Walk around inspection
c. Closing Conference
