Dante Level 2 Test Questions EXAM Questions
and Answers (Verified Answers) (Latest Update
2025-2026 UPDATE!!
Dante multicast can be True
managed with IGMP
Snooping v2 or v3.
When should IGMP When the estimated multicast bandwidth may
snooping (or other approach a network port's saturation point, impacting
multicast management) be performance.
considered for a Dante
network?
If a switch has 10x 1Gbps 20Gbps
ports, how much switching
capacity would a switch
need to be considered
"non-blocking"?
Can dante controller Yes
apply information in a
dante preset to a different
device?
whats the total latency if a .5 msec-if the transmitting device and the receiving
unicast subscription is device have different latencies, the higher latency
made between two dante setting will be used.
devices, transmitter
latency of .25 msec and
receiver of .5 msec, whats
the total latency?
Minimum latency for 1msec
multicast
, 1msec
whats the total latencty if a
multicast subscription is multicast transmission will always have a latency of
made between two dante 1msec
devices, transmitter
latency of .25 msec and switches often take more time to analyse and forward
receiver of .5 msec, whats multicast data, so dante needs to compensate.
the total latency?
1msec setting can cover a network 10 switches wide
what happens if multiple both will be elevated in the clock election process ,
devices have the only one of those two will become the clock leader.
preferred leader
checkbox marked?
dante controller can recall True
all of a preset, or part of a
preset. When only
recalling part of a preset,
we can limit the recall to
specific features and/or
specific devices.
How does precision time The clock leader dstributes a very accurate date-time
protocol (PTP) work in reference. Each follower derives the required sample
dante devices? rate or frame rate from this leader.
What is the golden rule Work on one network at a time, verify that devices are
for commissioning not set to switched mode
redundant networks?
How much switching 20 Gbps-10 Gbps both ways on each port
capacity is needed for a
switch with 10 1 Gbps
ports?
and Answers (Verified Answers) (Latest Update
2025-2026 UPDATE!!
Dante multicast can be True
managed with IGMP
Snooping v2 or v3.
When should IGMP When the estimated multicast bandwidth may
snooping (or other approach a network port's saturation point, impacting
multicast management) be performance.
considered for a Dante
network?
If a switch has 10x 1Gbps 20Gbps
ports, how much switching
capacity would a switch
need to be considered
"non-blocking"?
Can dante controller Yes
apply information in a
dante preset to a different
device?
whats the total latency if a .5 msec-if the transmitting device and the receiving
unicast subscription is device have different latencies, the higher latency
made between two dante setting will be used.
devices, transmitter
latency of .25 msec and
receiver of .5 msec, whats
the total latency?
Minimum latency for 1msec
multicast
, 1msec
whats the total latencty if a
multicast subscription is multicast transmission will always have a latency of
made between two dante 1msec
devices, transmitter
latency of .25 msec and switches often take more time to analyse and forward
receiver of .5 msec, whats multicast data, so dante needs to compensate.
the total latency?
1msec setting can cover a network 10 switches wide
what happens if multiple both will be elevated in the clock election process ,
devices have the only one of those two will become the clock leader.
preferred leader
checkbox marked?
dante controller can recall True
all of a preset, or part of a
preset. When only
recalling part of a preset,
we can limit the recall to
specific features and/or
specific devices.
How does precision time The clock leader dstributes a very accurate date-time
protocol (PTP) work in reference. Each follower derives the required sample
dante devices? rate or frame rate from this leader.
What is the golden rule Work on one network at a time, verify that devices are
for commissioning not set to switched mode
redundant networks?
How much switching 20 Gbps-10 Gbps both ways on each port
capacity is needed for a
switch with 10 1 Gbps
ports?
