API 1169 STUDY GUIDE 119 QUESTIONS & CORRECT ANSWERS
A leak Test (pressure testing) is typically performed at what pressure
ratio according to industry standards. - correct answer- <1.25
A strength test (pressure testing) is typically performed at what pressure
ratio according to industry standards? - correct answer- 1.25
A type of imperfection with separation or weakness, usually aligned in a
parallel manner to the metal surface is an _ _ _. - correct answer-
lamination
According to CGA Best Practices, adherence to the statute and its
regulations, best describes which of the following? - correct answer-
Compliance
According to OSHA, any condition that poses an immediate or delayed
threat to life or that would cause irreversible adverse health effects or
that would interfere with an individual's ability to escape unaided from a
permit space. - correct answer- IDLH- Immediately dangerous to life
or health
,According to OSHA, eye and face PPE shall be distinctly marked to
facilitate identification of which of the following? - correct answer-
The manufacturer
According to OSHA, lockout devices must meet which of the following
criteria when considering the prevention of removal from the device or
box it is attached to except for? - correct answer- Be constructed
and printed so that exposure to weather conditions or wet and damp
locations will cause the tag to deteriorate
According to OSHA, synthetic web slings shall be removed from service if
any of the following conditions are present, except: - correct answer-
Muddy/wet lifting legs
According to OSHA, unless the use of retaining devices are sufficient to
prevent material or equipment from falling or rolling into excavations,
the minimum distance a piece of equipment (generator, water pump,
etc.) should be kept from the edge of an excavation is _ _ _. - correct
answer- 2 feet
According to OSHA, which soil classification cannot be benched? -
correct answer- Type C
According to the Common Ground Alliance, maps of existing,
abandoned, and out of service facilities; cathodic Protection and
grounding systems; as-builts of facilities in the area of the maps are not
, current; proposed project designs; and schedules of other work in the
area should be gathered by the: - correct answer- Owner/Operators
According to the lesson material, the definition of ground disturbance is:
- correct answer- Any activity that disturbs the ground in a manner to
cause penetration
All inspectors should be aware of the equipment on a typical right of way
project. What is the name of the type of machine typically used for
lowering -in a section of pipeline? - correct answer- Side-boom
All mainline pipeline welding strictly follows which of the following? -
correct answer- Owner and operator approved and qualified welding
procedures.
All temporary fill and dewater Piping should be connected with _ _ _. -
correct answer- Welded or screwed joints.
An employee should report any non-compliant H&S activities to _. -
correct answer- A supervisor
An event where damage did not occur, but a clear potential for damage
was identified. - correct answer- near miss
A leak Test (pressure testing) is typically performed at what pressure
ratio according to industry standards. - correct answer- <1.25
A strength test (pressure testing) is typically performed at what pressure
ratio according to industry standards? - correct answer- 1.25
A type of imperfection with separation or weakness, usually aligned in a
parallel manner to the metal surface is an _ _ _. - correct answer-
lamination
According to CGA Best Practices, adherence to the statute and its
regulations, best describes which of the following? - correct answer-
Compliance
According to OSHA, any condition that poses an immediate or delayed
threat to life or that would cause irreversible adverse health effects or
that would interfere with an individual's ability to escape unaided from a
permit space. - correct answer- IDLH- Immediately dangerous to life
or health
,According to OSHA, eye and face PPE shall be distinctly marked to
facilitate identification of which of the following? - correct answer-
The manufacturer
According to OSHA, lockout devices must meet which of the following
criteria when considering the prevention of removal from the device or
box it is attached to except for? - correct answer- Be constructed
and printed so that exposure to weather conditions or wet and damp
locations will cause the tag to deteriorate
According to OSHA, synthetic web slings shall be removed from service if
any of the following conditions are present, except: - correct answer-
Muddy/wet lifting legs
According to OSHA, unless the use of retaining devices are sufficient to
prevent material or equipment from falling or rolling into excavations,
the minimum distance a piece of equipment (generator, water pump,
etc.) should be kept from the edge of an excavation is _ _ _. - correct
answer- 2 feet
According to OSHA, which soil classification cannot be benched? -
correct answer- Type C
According to the Common Ground Alliance, maps of existing,
abandoned, and out of service facilities; cathodic Protection and
grounding systems; as-builts of facilities in the area of the maps are not
, current; proposed project designs; and schedules of other work in the
area should be gathered by the: - correct answer- Owner/Operators
According to the lesson material, the definition of ground disturbance is:
- correct answer- Any activity that disturbs the ground in a manner to
cause penetration
All inspectors should be aware of the equipment on a typical right of way
project. What is the name of the type of machine typically used for
lowering -in a section of pipeline? - correct answer- Side-boom
All mainline pipeline welding strictly follows which of the following? -
correct answer- Owner and operator approved and qualified welding
procedures.
All temporary fill and dewater Piping should be connected with _ _ _. -
correct answer- Welded or screwed joints.
An employee should report any non-compliant H&S activities to _. -
correct answer- A supervisor
An event where damage did not occur, but a clear potential for damage
was identified. - correct answer- near miss
