COSC 354 EXAM 2 REVIEW QUESTIONS
What type of steel joining method is no longer used due to labor costs:
Riveting
During the manufacturing of steel, a mini-mill mostly uses scrap steel from what
product:
Cars
What is the main difference between cast iron and wrought iron:
Carbon Percentage
The type of steel includes the addition of nickel and chromium:
Stainless Steel
These type of bolts are typically used as a temporary means of steel installation. These
are also used in light framing scenarios:
Carbon Steel Bolts
In this type of bolting method, the end of the bolts physically breaks off when the bolt is
fully tensioned:
Tension-Control Bolts
To confirm a bolt is tensioned properly, this method provides for an easy visual
inspection because the washer displays a liquid when fully tightened:
Load Indicator Washer
With this type of bolted connection, the bolt uses the shear stress of the adjacent steel
to allow for slipage to meet bear against the body of the bolt:
Bearing-Type
When performing a weld, air needs to be kept out of the weld to keep from rapid
oxidation. This is mostly commonly resolved by:
What type of steel joining method is no longer used due to labor costs:
Riveting
During the manufacturing of steel, a mini-mill mostly uses scrap steel from what
product:
Cars
What is the main difference between cast iron and wrought iron:
Carbon Percentage
The type of steel includes the addition of nickel and chromium:
Stainless Steel
These type of bolts are typically used as a temporary means of steel installation. These
are also used in light framing scenarios:
Carbon Steel Bolts
In this type of bolting method, the end of the bolts physically breaks off when the bolt is
fully tensioned:
Tension-Control Bolts
To confirm a bolt is tensioned properly, this method provides for an easy visual
inspection because the washer displays a liquid when fully tightened:
Load Indicator Washer
With this type of bolted connection, the bolt uses the shear stress of the adjacent steel
to allow for slipage to meet bear against the body of the bolt:
Bearing-Type
When performing a weld, air needs to be kept out of the weld to keep from rapid
oxidation. This is mostly commonly resolved by:
