API 510 NME Flashcards Questions With Complete
Solutions
Approve all temporary repairs performed using fillet welded
patches.
Inspector and engineer
Approve and coument the design for all lap bend repairs.
Inspector and engineer
When restoring removed, corroded or missing clad or overlay
areas, review and approve the repair procedure before
implementations.
Inspector and engineer
Approve alternative NDE techniques where those specified by
the code are not practical or possible.
Inspector and engineer
Establish the visual external inspection interval in accordance
with the owner/users quality assurance program.
Inspector or engineer
Establish the RBI inspection interval.
Inspector or engineer
Approve all proposed methods of design, execution, materials,
welding procedures, NDE and testing.
Inspector or engineer
, Define the type of damage, the NDE technique and extent of
examination during pressure vessel inspection.
Inspector, in consultation with a corrosion specialist or engineer.
Determine when removing deposits or linings is necessary to
perform adequate inspections of pressure vessels.
Inspector, in consultation with a corrosion specialist or engineer.
Choose the corrosion rate that best indicates or shows the
current conditions.
Inspector, in consultation with a corrosion specialist.
Conduct all on-stream inspection required by the inspection
plan.
Inspector or engineer
Obtain thickness measurements to justify the thickness of vessel
components
Inspector or examiner
With suitable methods such as optical spectrographic analyzers
or x-ray fluorescence analyzers, perform material testing
Inspector or examiner
Maintain certification records of the examiners employed
Examiner's employer
Assist the inspector by performing specific non-destructive
examinations on pressure vessel components
Examiners
Solutions
Approve all temporary repairs performed using fillet welded
patches.
Inspector and engineer
Approve and coument the design for all lap bend repairs.
Inspector and engineer
When restoring removed, corroded or missing clad or overlay
areas, review and approve the repair procedure before
implementations.
Inspector and engineer
Approve alternative NDE techniques where those specified by
the code are not practical or possible.
Inspector and engineer
Establish the visual external inspection interval in accordance
with the owner/users quality assurance program.
Inspector or engineer
Establish the RBI inspection interval.
Inspector or engineer
Approve all proposed methods of design, execution, materials,
welding procedures, NDE and testing.
Inspector or engineer
, Define the type of damage, the NDE technique and extent of
examination during pressure vessel inspection.
Inspector, in consultation with a corrosion specialist or engineer.
Determine when removing deposits or linings is necessary to
perform adequate inspections of pressure vessels.
Inspector, in consultation with a corrosion specialist or engineer.
Choose the corrosion rate that best indicates or shows the
current conditions.
Inspector, in consultation with a corrosion specialist.
Conduct all on-stream inspection required by the inspection
plan.
Inspector or engineer
Obtain thickness measurements to justify the thickness of vessel
components
Inspector or examiner
With suitable methods such as optical spectrographic analyzers
or x-ray fluorescence analyzers, perform material testing
Inspector or examiner
Maintain certification records of the examiners employed
Examiner's employer
Assist the inspector by performing specific non-destructive
examinations on pressure vessel components
Examiners
