ENDEAVOR AIR
AIRCRAFT
FAMILIARIZATION
EXAM WITH
COMPLETE
SOLUTIONS
How do you unlock lavatory door ? -ANSLift "lavatory" plate and slide lock until green
fully appears
What does the red marking on the over head bin on CRJ200 mean? -ANSBin is not
properly closed
Who do you notify if there is a galley drain failure ? -ANSCaptain/ flight deck
What does it mean if the waste temperature sensor is grey ? -ANSHalon 1301 has been
discharged! It has reached 160 degrees. Notify flight deck immediately.
What is on the exit sign of the CRJ 900 atmosphere? -ANSGreen running man
CRJ 200 mid ceiling indicator lights -ANSWhite light= pilot calling
Blue light= passenger calling
Amber light=lavatory calling
Emergency flashing white light for emergency from flight deck.
, CRJ 200 power source (Taxi and inflight) -ANS1. engine driven generators
2.Gpu and APU
3.Batteries (maintains power for 30 mins)
Air Driven Generator -ANSGenerates power from the airstream
Halon 1301 -ANSAutomatic fire extinguisher
Where is the Water Shutoff Valve in CRJ200? -ANSUnder the lavatory sink in the AFT
Flt attendant panel lights CRJ200 -ANSSolid for normal call and flashing for emergency
What is the standard maximum altitude for all CRJ aircrafts? -ANS41,000ft
where are the overwing exits on each aircraft? -ANSCRJ200- Row 8
CRJ700- Row 12
CRJ900-Row 12 and 13
Where is the lavatory on the CRJ 700 ? -ANSAFT A/C R
How do you close MCD? -ANSHold down the door assist button and hold until it gets
close, then grasp hand grip with left hand. Push internal latch handle down with right
hand. Make sure pin is fully retracted
5 Checks before closing MCD? -ANS1) check the area is clear of obstruction
2)Handrails are up
3)quick release pins are in
4) the latch handle is fully open
5) the latch pins are retracted
How do you open GSD on CRJ 200? On CRJ 700/900? -ANS1) Ensure MCD is open
2) ensure the doors interior and exterior are clear.
3)Hold galley assist handle for personal safety
4)Rotate the internal latch handle clockwise to open
5)Push door out and forward while continuing to hold onto galley assist handle
6)Secure door to side of aircraft
The same except internal latch handle opens counter clockwise. No push pull plate.
What does the push pull plate do on the GSD of CRJ 200? -ANSMakes sure door is
flush for preflight
When are overwing exits used? -ANSEmergency Evacuation only.
When do the florescent lights in lavatory become bright? -ANSwhen door is locked
AIRCRAFT
FAMILIARIZATION
EXAM WITH
COMPLETE
SOLUTIONS
How do you unlock lavatory door ? -ANSLift "lavatory" plate and slide lock until green
fully appears
What does the red marking on the over head bin on CRJ200 mean? -ANSBin is not
properly closed
Who do you notify if there is a galley drain failure ? -ANSCaptain/ flight deck
What does it mean if the waste temperature sensor is grey ? -ANSHalon 1301 has been
discharged! It has reached 160 degrees. Notify flight deck immediately.
What is on the exit sign of the CRJ 900 atmosphere? -ANSGreen running man
CRJ 200 mid ceiling indicator lights -ANSWhite light= pilot calling
Blue light= passenger calling
Amber light=lavatory calling
Emergency flashing white light for emergency from flight deck.
, CRJ 200 power source (Taxi and inflight) -ANS1. engine driven generators
2.Gpu and APU
3.Batteries (maintains power for 30 mins)
Air Driven Generator -ANSGenerates power from the airstream
Halon 1301 -ANSAutomatic fire extinguisher
Where is the Water Shutoff Valve in CRJ200? -ANSUnder the lavatory sink in the AFT
Flt attendant panel lights CRJ200 -ANSSolid for normal call and flashing for emergency
What is the standard maximum altitude for all CRJ aircrafts? -ANS41,000ft
where are the overwing exits on each aircraft? -ANSCRJ200- Row 8
CRJ700- Row 12
CRJ900-Row 12 and 13
Where is the lavatory on the CRJ 700 ? -ANSAFT A/C R
How do you close MCD? -ANSHold down the door assist button and hold until it gets
close, then grasp hand grip with left hand. Push internal latch handle down with right
hand. Make sure pin is fully retracted
5 Checks before closing MCD? -ANS1) check the area is clear of obstruction
2)Handrails are up
3)quick release pins are in
4) the latch handle is fully open
5) the latch pins are retracted
How do you open GSD on CRJ 200? On CRJ 700/900? -ANS1) Ensure MCD is open
2) ensure the doors interior and exterior are clear.
3)Hold galley assist handle for personal safety
4)Rotate the internal latch handle clockwise to open
5)Push door out and forward while continuing to hold onto galley assist handle
6)Secure door to side of aircraft
The same except internal latch handle opens counter clockwise. No push pull plate.
What does the push pull plate do on the GSD of CRJ 200? -ANSMakes sure door is
flush for preflight
When are overwing exits used? -ANSEmergency Evacuation only.
When do the florescent lights in lavatory become bright? -ANSwhen door is locked
