BMW MEMBERS TEST : 100 PRACTICE
QUESTIONS AND ANSWERS LATEST 2025-
2026 EDITION
Table of Contents
Section A – Workshop Technology & Tools (Q1–20)
Section B – Chassis, Brakes & Steering (Q21–40)
Section C – Drivetrain & Transfer Case (Q41–60)
Section D – Electrical & Electronics (Q61–80)
Section E – DSC, Sensors & Diagnostics (Q81–100)
Section A – Workshop Technology & Tools
1. When measuring with a micrometer, the most common error comes from:
A) Excessive measuring force
B) Incorrect scale reading
C) Using dirty anvils
D) All of the above
Answer: D
,2. What is the correct torque for wheel bolts on most BMW passenger cars?
A) 60 Nm
B) 120 Nm
C) 140 Nm
D) 180 Nm
Answer: B
3. A torque wrench should always be:
A) Stored fully loaded
B) Released to zero setting after use
C) Calibrated every 10 years
D) Lubricated with engine oil
Answer: B
4. Which lifting point should always be used when raising a BMW vehicle?
A) Subframe mounts
B) Reinforced jack pads
C) Rear differential case
D) Fuel tank brackets
Answer: B
5. What does the BMW workshop symbol with a lightning bolt indicate?
A) Air conditioning system
B) High-voltage area
C) Brake bleeding point
D) Lubrication system
Answer: B
, 6. Which type of gloves should be worn when handling brake fluid?
A) Cotton
B) Leather
C) Nitrile
D) Wool
Answer: C
7. The BMW TIS (Technical Information System) provides:
A) Marketing materials
B) Repair instructions and torque specs
C) Sales offers
D) Driving statistics
Answer: B
8. BMW-approved coolant is usually:
A) Green universal
B) Blue or purple G48
C) Red Dexcool
D) Yellow Prestone
Answer: B
9. Brake fluid DOT 4 should be replaced every:
A) 6 months
B) 12 months
C) 24 months
D) Only when ABS light shows
Answer: C
QUESTIONS AND ANSWERS LATEST 2025-
2026 EDITION
Table of Contents
Section A – Workshop Technology & Tools (Q1–20)
Section B – Chassis, Brakes & Steering (Q21–40)
Section C – Drivetrain & Transfer Case (Q41–60)
Section D – Electrical & Electronics (Q61–80)
Section E – DSC, Sensors & Diagnostics (Q81–100)
Section A – Workshop Technology & Tools
1. When measuring with a micrometer, the most common error comes from:
A) Excessive measuring force
B) Incorrect scale reading
C) Using dirty anvils
D) All of the above
Answer: D
,2. What is the correct torque for wheel bolts on most BMW passenger cars?
A) 60 Nm
B) 120 Nm
C) 140 Nm
D) 180 Nm
Answer: B
3. A torque wrench should always be:
A) Stored fully loaded
B) Released to zero setting after use
C) Calibrated every 10 years
D) Lubricated with engine oil
Answer: B
4. Which lifting point should always be used when raising a BMW vehicle?
A) Subframe mounts
B) Reinforced jack pads
C) Rear differential case
D) Fuel tank brackets
Answer: B
5. What does the BMW workshop symbol with a lightning bolt indicate?
A) Air conditioning system
B) High-voltage area
C) Brake bleeding point
D) Lubrication system
Answer: B
, 6. Which type of gloves should be worn when handling brake fluid?
A) Cotton
B) Leather
C) Nitrile
D) Wool
Answer: C
7. The BMW TIS (Technical Information System) provides:
A) Marketing materials
B) Repair instructions and torque specs
C) Sales offers
D) Driving statistics
Answer: B
8. BMW-approved coolant is usually:
A) Green universal
B) Blue or purple G48
C) Red Dexcool
D) Yellow Prestone
Answer: B
9. Brake fluid DOT 4 should be replaced every:
A) 6 months
B) 12 months
C) 24 months
D) Only when ABS light shows
Answer: C
