FDNYC G60 Prep Exam Rated A+
A Certificate of Fitness Holder must keep his or her certificate - ANSWER-on their
person or otherwise readily available for inspection by any representative of the fire
Department
A Certificate of Fitness Holder must keep his or her certificate - ANSWER-On their
person.
A city-wide permit is valid - ANSWER-up to 30 days
A Citywide permit is valid for up to - ANSWER-30 Days
A class A fire extinguisher fights fires from - ANSWER-Paper
A class B fire extinguisher fights fires from - ANSWER-oil
A compressed gas container must - ANSWER-Not be rolled on its side.
A control valve should be - ANSWER-opened by hand
A designated Hot Work area must be at least_______ feet away from combustible
materials. - ANSWER-35.
A fire extinguisher must be mounted - ANSWER-so that the top is not more than 5 feet
off the floor
A fire extinguisher must be mounted - ANSWER-so that the top is not more than 5 feet
off the floor
A fire guard is responsible for - ANSWER-overseeing torch operations.
A flame going out unexpectedly and creating a popping sound is known as - ANSWER-
Backfire.
A hot work permit is required for - ANSWER-welding
A hot work permit is required for - ANSWER-Welding.
A minimum ___________ rating Fire Extinguisher must be readily accessible within
________ of the hot work location for torch operations. - ANSWER-2-A:20-B:C, 30 feet.
A permit is required for storing a flammable gas in excess of - ANSWER-400 scf
, A person holding a Certificate of Fitness who is trained and responsible for maintaining
a fire watch is known as a - ANSWER-Fire Guard
A rapid, persistent chemical reaction that releases heat and light, especially the burning
of a combustible substance in the presence of oxygen. - ANSWER-A Fire
A Responsible Person is one who is - ANSWER-trained in the fire safety hazards
associated with hot work, and in the necessary and appropriate measures to minimize
those hazards, who is designated by the owner of a premises to authorize the
performance of hot work at the premises.
A spark producing tool - ANSWER-requires a Fire Guard
A spark producing tool - ANSWER-Requires a Fire Guard.
A temporary permit to conduct torch operations is valid from - ANSWER-1 day to 12
months
A torch should be ignited by using a - ANSWER-Friction device.
A type C fire involves - ANSWER-Live electrical equipment
A type D fire involves - ANSWER-Combustible Metals
A type of clothing that should not be worn when performing torch operations is -
ANSWER-Frayed Clothing.
A type of valve typically used in sprinkler systems - ANSWER-OS & Y Valve- Outside
Screw and Yoke Valve.
A work area should be - ANSWER-Well Ventilated
A work area should be - ANSWER-Well ventilated.
A written statement issued by the commissioner certifying that the person to whom it is
issued has passed an examination as to his or her qualifications or is otherwise deemed
qualified to use or supervise the storage, handling and use of a material - ANSWER-
Certificate of Fitness
Acetylene burns at - ANSWER-3000 degrees Fahrenheit
Acetylene valves should not be opened more than - ANSWER-1 1/2 turns
All gas containers and the related equipment - ANSWER-must be protected from
extreme temperature and physical damage.
A Certificate of Fitness Holder must keep his or her certificate - ANSWER-on their
person or otherwise readily available for inspection by any representative of the fire
Department
A Certificate of Fitness Holder must keep his or her certificate - ANSWER-On their
person.
A city-wide permit is valid - ANSWER-up to 30 days
A Citywide permit is valid for up to - ANSWER-30 Days
A class A fire extinguisher fights fires from - ANSWER-Paper
A class B fire extinguisher fights fires from - ANSWER-oil
A compressed gas container must - ANSWER-Not be rolled on its side.
A control valve should be - ANSWER-opened by hand
A designated Hot Work area must be at least_______ feet away from combustible
materials. - ANSWER-35.
A fire extinguisher must be mounted - ANSWER-so that the top is not more than 5 feet
off the floor
A fire extinguisher must be mounted - ANSWER-so that the top is not more than 5 feet
off the floor
A fire guard is responsible for - ANSWER-overseeing torch operations.
A flame going out unexpectedly and creating a popping sound is known as - ANSWER-
Backfire.
A hot work permit is required for - ANSWER-welding
A hot work permit is required for - ANSWER-Welding.
A minimum ___________ rating Fire Extinguisher must be readily accessible within
________ of the hot work location for torch operations. - ANSWER-2-A:20-B:C, 30 feet.
A permit is required for storing a flammable gas in excess of - ANSWER-400 scf
, A person holding a Certificate of Fitness who is trained and responsible for maintaining
a fire watch is known as a - ANSWER-Fire Guard
A rapid, persistent chemical reaction that releases heat and light, especially the burning
of a combustible substance in the presence of oxygen. - ANSWER-A Fire
A Responsible Person is one who is - ANSWER-trained in the fire safety hazards
associated with hot work, and in the necessary and appropriate measures to minimize
those hazards, who is designated by the owner of a premises to authorize the
performance of hot work at the premises.
A spark producing tool - ANSWER-requires a Fire Guard
A spark producing tool - ANSWER-Requires a Fire Guard.
A temporary permit to conduct torch operations is valid from - ANSWER-1 day to 12
months
A torch should be ignited by using a - ANSWER-Friction device.
A type C fire involves - ANSWER-Live electrical equipment
A type D fire involves - ANSWER-Combustible Metals
A type of clothing that should not be worn when performing torch operations is -
ANSWER-Frayed Clothing.
A type of valve typically used in sprinkler systems - ANSWER-OS & Y Valve- Outside
Screw and Yoke Valve.
A work area should be - ANSWER-Well Ventilated
A work area should be - ANSWER-Well ventilated.
A written statement issued by the commissioner certifying that the person to whom it is
issued has passed an examination as to his or her qualifications or is otherwise deemed
qualified to use or supervise the storage, handling and use of a material - ANSWER-
Certificate of Fitness
Acetylene burns at - ANSWER-3000 degrees Fahrenheit
Acetylene valves should not be opened more than - ANSWER-1 1/2 turns
All gas containers and the related equipment - ANSWER-must be protected from
extreme temperature and physical damage.
