Metal Coils Endorsement (NYS) Exam 2025/2026 Actual
Complete Real Exam Questions & Well Elaborated
Correct Answers | 100% Verified solutions /
Already Passed / Graded A+ | 2025
Latest Exam!!
What structure or device is used to prevent longitudinal
movement of the coil in
the forward direction? - ANSWER-At least one direct
tiedown is required
through its eye, restricting
forward motion.
Which means of securement is prohibited when transporting
coils with the coil
eye crosswise on the vehicle? - ANSWER-Attaching direct
tiedown diagonally
through the eye of a coil to form an X-pattern is
prohibited.
, The sum of the working load limits (WLL) from all tiedowns
must be at least what percentage of the weight of the coils? -
ANSWER-At least 50% of the weight of the coils.
When is the use of a friction mat recommended? - ANSWER-
When the deck or
coil is soaked
with oil.
What are the requirements for securing metal coils with eyes
lengthwise? (Option #3) - ANSWER-1. Support the coil above
the deck to prevent the coil from rolling.
2. Two indirect tiedowns are attached over the front and rear
parts of the coil.
3. Use blocking or friction mats to prevent forward movement.
What are the requirements for securing metal coils with eyes
lengthwise? (Option #1) - ANSWER-1. Support the coil above
the deck to prevent the coil from rolling.
2. Attach at least one direct tiedown on each diagonal through
the eye of the coil making an angle of not more than 45
degrees with the floor of vehicle when viewed from the side.
Complete Real Exam Questions & Well Elaborated
Correct Answers | 100% Verified solutions /
Already Passed / Graded A+ | 2025
Latest Exam!!
What structure or device is used to prevent longitudinal
movement of the coil in
the forward direction? - ANSWER-At least one direct
tiedown is required
through its eye, restricting
forward motion.
Which means of securement is prohibited when transporting
coils with the coil
eye crosswise on the vehicle? - ANSWER-Attaching direct
tiedown diagonally
through the eye of a coil to form an X-pattern is
prohibited.
, The sum of the working load limits (WLL) from all tiedowns
must be at least what percentage of the weight of the coils? -
ANSWER-At least 50% of the weight of the coils.
When is the use of a friction mat recommended? - ANSWER-
When the deck or
coil is soaked
with oil.
What are the requirements for securing metal coils with eyes
lengthwise? (Option #3) - ANSWER-1. Support the coil above
the deck to prevent the coil from rolling.
2. Two indirect tiedowns are attached over the front and rear
parts of the coil.
3. Use blocking or friction mats to prevent forward movement.
What are the requirements for securing metal coils with eyes
lengthwise? (Option #1) - ANSWER-1. Support the coil above
the deck to prevent the coil from rolling.
2. Attach at least one direct tiedown on each diagonal through
the eye of the coil making an angle of not more than 45
degrees with the floor of vehicle when viewed from the side.
