FDOT ASPHALT PAVING Level 1 Exam Latest Actual Questions And Correct Verified Answers

1 || |P | a | g | e




FDOT ASPHALT PAVING Level 1 Exam
2025-2026 Latest Actual Questions And
Correct Verified Answers


S to N - Correct-answer-Down station
| | | | |




W to E - Correct-answer-Down station
| | | | |




Stationing - Correct-answer-Starts at 0+00
| | | |




Stationing Measurement - Correct-answer-1+00 is 100 feet
| | | | | |




Straight Edge is the - Correct-answer-Measurement of Pavement smoothness
| | | | | | | |


with a 15 foot 4.573 m rolling straightedge
| | | | | | | |

, 2 || |P | a | g | e




Straight Edge is used to - Correct-answer-identify problems
| | | | | | |




Random sampling - Correct-answer-Are random numbers generated usually by a
| | | | | | | | |


VT for cores to be extracted from the roadway
| | | | | | | | |




How often should you calibrate a Straight edge - Correct-answer-Calibrate at the
| | | | | | | | | | |


start of each working period
| | | | |




Using the manual straight edge you find what kind of spot to place the rolling
| | | | | | | | | | | | | |


straightedge? - Correct-answer-Locate a flat area with the manual straightedge
| | | | | | | | | |


and place the rolling straightedge next to the manual straightedge and the gauge
| | | | | | | | | | | | |


should read 0
| | |




The 3/16 and the 3/8 shims go under which wheels during calibration - Correct-
| | | | | | | | | | | | |


answer-The outside wheels to measure the low and the center to measure the
| | | | | | | | | | | | |


high. Gauge should read 3/16 on the 3/16 shim and vice versa for the 3/8
| | | | | | | | | | | | | | |


shims. Make sure the center wheel moves up and down freely.
| | | | | | | | | | |