Page 1 of 27
OSHA 510 STUDYGUIDE RECENT AND MOST
COMPLETE
VERSION ALL 150 QUESTIONS AND CORRECT
ANSWERS/
BEST GRADED A+
- ANSWER
When is cross bracing on a scaffold acceptable as a - ANSWER
midrail?:
1926.451(g)(4)(xv)
Crossbracing is acceptable in place of a midrail when the crossing point of two
braces is between (20 inches and 30 inches)
True or False: Material handling rigging equipment only needs to be
inspected - ANSWER
once daily?: False -
1926.251(a)(1)
Rigging equipment for material handling shall be inspected (prior to use on each
shift and as necessary) during its use to ensure that it is safe. Defective rigging
equipment shall be removed from service.
Page 9 of 27
Who has the authority to stop crane - ANSWER operations?:
Whenever there is a concern as to safety, the (operator) must have
the authority to stop and refuse to handle loads until a qualified person has
determined that safety has been assured. IAW 1926.1419, during
operations - ANSWER when is the operator required to safely stop operations?:
1926.1419(f)
During operations requiring signals, the ability to transmit signals between the
operator and signal person must be maintained. If that ability is interrupted at any
time, the operator must safely stop operations requiring signals until it is
reestablished and a proper signal is given and understood.
Who is responsible for training crane signal - ANSWER personnel?:
1926.1430(b) (The employer) must train each employee who
will be assigned to work as a signal persons.
True or False: Rollover Protection materials must perform at 10
degrees - ANSWER
Fahrenheit?: False - 1926.1001(f)(2)(iv)
Material used in the ROPS must have the capability of performing at (zero degrees
Fahrenheit).
What regulation cover training for powered industrial - ANSWER trucks?:
,1910.178
IAW Subpart A, which organization and regulation
(incorporated by reference) - ANSWER covers eye and face protection?: ANSI
Z87.1
What is the hierarchical control method employers use to protect employees? -
ANSWER: Engineering Controls
Administrative Controls
Page 10 of 27
PPE
Respirators are covered by what - ANSWER regulation?: 1910.134
Page 11 of 27
IAW Subpart D, when is personnel certified first-aid training required? -
ANSWER: 1926.50(c)
In the absence of an infirmary, clinic, hospital, or physician.
How should drinking water be dispensed from portable - ANSWER
containers?: 1926.51(a)(2)
Portable containers used to dispense drinking water shall be capable of being
(tightly closed, and equipped with a tap. Water shall not be dipped from
containers).
True or False: IAW Subpart D paragraph L, excessive exposure
to lead only has - ANSWER
adverse effects on the male reproductive system?: False -
1926.62(l)(2)(iv)
Excessive exposure to lead will have adverse reproductive effects on both males
and females.
Vertical - ANSWER Standard: Vertical standard apply to a specific
industry (I.E.)
Construction 1926
LOI - Letter of - ANSWER Interpretation: OSHA has received
many requests for clarification about their standards
from employers and individuals. When OSHA responds to these questions
they will do so with a letter of
Interpretation.
Multi-Employer work sight - ANSWER policy: creating employer - one who
creates the hazard has the duty to inform other contractors
Construction Fatal - ANSWER Four: Falls
Page 12 of 27
Struck By Objects
Electrocutions
Caught- in-between
- ANSWER Inspectors: 2,100
Citations - ANSWER and Penalties: Willfull
Serious
Other-than Serious
, Repeated
Employer must report to - ANSWER OSHA: All work-related fatalities
within 8hrs and all inpatient hospitalization, amputations and
losses of an eye within 24hrs.
OSHA Forms for Reporting and - ANSWER Recording: 300
300A
301
General Duty Clause Section - ANSWER 5(a)(1): Employees shall have a
place of employment which are free from recognized hazards that
are causing or are likely to cause death or serious physical harm to his
employees. Osha was not allowed to use? - ANSWER: State Level standards.
Osha is a part of the? - ANSWER: Department of Labor
Page 13 of 27
1. The Four basic elements of OSHA's Safety and Health Management
- ANSWER Guidelines
are:: a. Hazard Prevention
b. Safety and Health Training
c. Worksite Analysis
d. Management/Employee Involvement
2. The morale of employees is affected by increased injuries and illnesses? T/F
ANSWER: True
OSHA's mission is - ANSWER to:: To protect the safety and health of American
workers
4. Workers' rights are protected when they seek fair treatment when raising
health
& safety concerns is known - ANSWER as:: Whistleblower Rights in part 11(C) -
Judicial Review of the Act
5. Horizontal Standards apply - ANSWER when:: When a condition is not
covered by specific industry standard
The purpose of Directives, including Directive and Compliance Procedure
Letters or Citation Policy Letters (CPL) are used as an enforcement
instrument: They are designed to - ANSWER accomplish the goal of::
a. Ensuring consistent enforcement of OSHA regulations b. Citation Location:
1926.6
7. CHSO are required by law to provide 4 basic onsite activities, list them:
ANSWER: a. Conduct and opening conference b. Present credentials c.
Perform walk around inspection
d. Conduct a closing conference
Page 14 of 27
8. Under the multi- employer's citation program, there are 4
specific entities that - ANSWER
may be cited. Name them:: a. Creating employer b. Exposing
employer
c. Correcting employer
OSHA 510 STUDYGUIDE RECENT AND MOST
COMPLETE
VERSION ALL 150 QUESTIONS AND CORRECT
ANSWERS/
BEST GRADED A+
- ANSWER
When is cross bracing on a scaffold acceptable as a - ANSWER
midrail?:
1926.451(g)(4)(xv)
Crossbracing is acceptable in place of a midrail when the crossing point of two
braces is between (20 inches and 30 inches)
True or False: Material handling rigging equipment only needs to be
inspected - ANSWER
once daily?: False -
1926.251(a)(1)
Rigging equipment for material handling shall be inspected (prior to use on each
shift and as necessary) during its use to ensure that it is safe. Defective rigging
equipment shall be removed from service.
Page 9 of 27
Who has the authority to stop crane - ANSWER operations?:
Whenever there is a concern as to safety, the (operator) must have
the authority to stop and refuse to handle loads until a qualified person has
determined that safety has been assured. IAW 1926.1419, during
operations - ANSWER when is the operator required to safely stop operations?:
1926.1419(f)
During operations requiring signals, the ability to transmit signals between the
operator and signal person must be maintained. If that ability is interrupted at any
time, the operator must safely stop operations requiring signals until it is
reestablished and a proper signal is given and understood.
Who is responsible for training crane signal - ANSWER personnel?:
1926.1430(b) (The employer) must train each employee who
will be assigned to work as a signal persons.
True or False: Rollover Protection materials must perform at 10
degrees - ANSWER
Fahrenheit?: False - 1926.1001(f)(2)(iv)
Material used in the ROPS must have the capability of performing at (zero degrees
Fahrenheit).
What regulation cover training for powered industrial - ANSWER trucks?:
,1910.178
IAW Subpart A, which organization and regulation
(incorporated by reference) - ANSWER covers eye and face protection?: ANSI
Z87.1
What is the hierarchical control method employers use to protect employees? -
ANSWER: Engineering Controls
Administrative Controls
Page 10 of 27
PPE
Respirators are covered by what - ANSWER regulation?: 1910.134
Page 11 of 27
IAW Subpart D, when is personnel certified first-aid training required? -
ANSWER: 1926.50(c)
In the absence of an infirmary, clinic, hospital, or physician.
How should drinking water be dispensed from portable - ANSWER
containers?: 1926.51(a)(2)
Portable containers used to dispense drinking water shall be capable of being
(tightly closed, and equipped with a tap. Water shall not be dipped from
containers).
True or False: IAW Subpart D paragraph L, excessive exposure
to lead only has - ANSWER
adverse effects on the male reproductive system?: False -
1926.62(l)(2)(iv)
Excessive exposure to lead will have adverse reproductive effects on both males
and females.
Vertical - ANSWER Standard: Vertical standard apply to a specific
industry (I.E.)
Construction 1926
LOI - Letter of - ANSWER Interpretation: OSHA has received
many requests for clarification about their standards
from employers and individuals. When OSHA responds to these questions
they will do so with a letter of
Interpretation.
Multi-Employer work sight - ANSWER policy: creating employer - one who
creates the hazard has the duty to inform other contractors
Construction Fatal - ANSWER Four: Falls
Page 12 of 27
Struck By Objects
Electrocutions
Caught- in-between
- ANSWER Inspectors: 2,100
Citations - ANSWER and Penalties: Willfull
Serious
Other-than Serious
, Repeated
Employer must report to - ANSWER OSHA: All work-related fatalities
within 8hrs and all inpatient hospitalization, amputations and
losses of an eye within 24hrs.
OSHA Forms for Reporting and - ANSWER Recording: 300
300A
301
General Duty Clause Section - ANSWER 5(a)(1): Employees shall have a
place of employment which are free from recognized hazards that
are causing or are likely to cause death or serious physical harm to his
employees. Osha was not allowed to use? - ANSWER: State Level standards.
Osha is a part of the? - ANSWER: Department of Labor
Page 13 of 27
1. The Four basic elements of OSHA's Safety and Health Management
- ANSWER Guidelines
are:: a. Hazard Prevention
b. Safety and Health Training
c. Worksite Analysis
d. Management/Employee Involvement
2. The morale of employees is affected by increased injuries and illnesses? T/F
ANSWER: True
OSHA's mission is - ANSWER to:: To protect the safety and health of American
workers
4. Workers' rights are protected when they seek fair treatment when raising
health
& safety concerns is known - ANSWER as:: Whistleblower Rights in part 11(C) -
Judicial Review of the Act
5. Horizontal Standards apply - ANSWER when:: When a condition is not
covered by specific industry standard
The purpose of Directives, including Directive and Compliance Procedure
Letters or Citation Policy Letters (CPL) are used as an enforcement
instrument: They are designed to - ANSWER accomplish the goal of::
a. Ensuring consistent enforcement of OSHA regulations b. Citation Location:
1926.6
7. CHSO are required by law to provide 4 basic onsite activities, list them:
ANSWER: a. Conduct and opening conference b. Present credentials c.
Perform walk around inspection
d. Conduct a closing conference
Page 14 of 27
8. Under the multi- employer's citation program, there are 4
specific entities that - ANSWER
may be cited. Name them:: a. Creating employer b. Exposing
employer
c. Correcting employer
