Asphalt - Inspection Questions And Answers | Updated Solutions | 100% Correct Answers

What is the inspector's job? - To ensure the pavement design as described in the contract produces a strong, reliable and durable pavement. - Acts as the eyes and ears for the owner. - To ensure the work done and equipments used meets the contracts requirements. - To reject any defective material being used. - Work closely with the contractor - Primarily concerned with quality What does the contract include? It includes the plans and specifications that must be followed. What does the contractor do? - Performs the work according to the contract. - Provides materials, equipments and expertise. - The contractor is primarily concerned with quantity What does the owner do? - The owner is either an individual, local, provincial or federal government agency - Pays the bid price - Set the plans and specifications for the project - Employs the inspector What is the purpose of inspection? - To verify the finished pavement meets the project requirements - To ensure the quality of the pavement What is a contract? It is an agreement between the owner and the contractor 8/8/25, 4:06 PM Asphalt - Inspection Flashcards | Quizlet authority found? It is found in the specifications - The inspector is too ensure the contract is followed, the contract is law, the inspector can reject any deviation What is discussed at preconstruction meetings? - The plans and specifications - Material deliveries - Construction Techniques - Traffic control procedures - Safety - Specific project responsibilities - Lines of authority defined Where does visual inspection of the mix occur? - Deficiencies can be checked at the paver - Deficiencies can be checked as the HMA comes off the screed behind the paver Deficiencies caused by temperature - Blue smoke, see and smell smoke this indicates AN OVERHEATED BATCH - Stiff appearance; The mix appears stiff, has a high peak from the truck, indicates a cool temp Deficiencies caused by delivery - Slumped mix, flat in the truck box indicates TOO MUCH ASPHALT - Lean dull (brown) appearance; this indicates too little asphalt and too much fines, the fines are absorbing too much asphalt - Non uniform material gradation caused by STOPPING THE PAVER