U1 UST Installation/Retrofitting
Exam Questions And Answers
|Latest 2025 | Guaranteed Pass
Save
Terms in this set (130)
1. One of the Improper Installation
significant
causes of leaks
in underground
liquid storage
systems is
____________
________________
obtain permits, solicit bids, and
2. Written Plans
provide precise guidance for
are required to
installers.
, Describe the property, identify the
size and location of the tanks,
3. The plans
indicate the liquids to be stored and
should
provide the location of the
dispensers and piping.
4. Storage Federal, state or local agencies.
systems
discussed in this
recommended
practice are
usually
regulated by
5. All owners applicable regulatory requirements
should ensure before being installed
that the
equipment to be
installed meets
6. Consult the finalized or construction is initiated.
local authorities
who have
jurisdiction in the
area before
storage-system
plans are
,7. All owners Being installed.
should ensure
that the
equipment to be
installed meets
all applicable
regulatory
requirements
before
8. To avoid dropped, dragged, or handled with
damage tanks sharp objects.
must not be
9. Tanks must not Damage to the tank
be dropped,
dragged, or
handled with
sharp objects to
avoid
10. The only time for inspections and testing.
tanks really
should be
moved is when
, 11. If a tanks is Repaired in accordance with the
damaged at all manufacture's instructions.
throughout the
moving process
it must be
12. The proper Lift lugs that are installed by the
way to move a manufacturer.
tank is by lifting
it, using the
13. Tanks should Cables or chains of adequate
be carefully length.
lifted and
lowered using
14. When two 30 degrees.
lifting lugs are
being used, the
angle between
the lifting cable
and vertical
should be no
more than
Exam Questions And Answers
|Latest 2025 | Guaranteed Pass
Save
Terms in this set (130)
1. One of the Improper Installation
significant
causes of leaks
in underground
liquid storage
systems is
____________
________________
obtain permits, solicit bids, and
2. Written Plans
provide precise guidance for
are required to
installers.
, Describe the property, identify the
size and location of the tanks,
3. The plans
indicate the liquids to be stored and
should
provide the location of the
dispensers and piping.
4. Storage Federal, state or local agencies.
systems
discussed in this
recommended
practice are
usually
regulated by
5. All owners applicable regulatory requirements
should ensure before being installed
that the
equipment to be
installed meets
6. Consult the finalized or construction is initiated.
local authorities
who have
jurisdiction in the
area before
storage-system
plans are
,7. All owners Being installed.
should ensure
that the
equipment to be
installed meets
all applicable
regulatory
requirements
before
8. To avoid dropped, dragged, or handled with
damage tanks sharp objects.
must not be
9. Tanks must not Damage to the tank
be dropped,
dragged, or
handled with
sharp objects to
avoid
10. The only time for inspections and testing.
tanks really
should be
moved is when
, 11. If a tanks is Repaired in accordance with the
damaged at all manufacture's instructions.
throughout the
moving process
it must be
12. The proper Lift lugs that are installed by the
way to move a manufacturer.
tank is by lifting
it, using the
13. Tanks should Cables or chains of adequate
be carefully length.
lifted and
lowered using
14. When two 30 degrees.
lifting lugs are
being used, the
angle between
the lifting cable
and vertical
should be no
more than
