OK Locksmith Exam 2025 Questions
and Answers
What joins a mortise cylinder to a mortise lock? - --CORRECT ANSWER--
Threads on the cylinder and a set screw
The key shown above matches the locks manufactured by - --CORRECT
ANSWER--schlage
What type of key normally must be duplicated with an end mill cutter? - --
CORRECT ANSWER--Paracentric
What is needed to remove the outside knob of a Schlage entrance set? - --
CORRECT ANSWER--Key and pin punch
A licensee who moves or changes employers shall notify the Oklahoma
Department of Labor within how many days? - --CORRECT ANSWER--14
A technician is weak, having chills and cannot seem to get enough to drink. What
is the likely cause of the technician's symptoms? - --CORRECT ANSWER--High
blood sugar
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
, The Oklahoma Alarm and Locksmith Industry Act applies to: - --CORRECT
ANSWER--Persons who sell, install and service alarm systems
What type of tumbler is most commonly used in a file cabinet lock? - --CORRECT
ANSWER--Short wafer
What is the maximum amount of administrative fines that can be levied against any
person for violations of the Oklahoma Alarm and Locksmith Industry Act? - --
CORRECT ANSWER--$1,000
coordinator is required on a pair of fire doors having: - --CORRECT ANSWER--
An overlapping astragal
With proper care, which cutter material typically provides the longest use? - --
CORRECT ANSWER--Carbide
Thru-bolt trim is used on many mortise locks to: - --CORRECT ANSWER--Make
the installation look better
If a conflict exists between adopted references, the reference that applies shall be
the one: - --CORRECT ANSWER--With the more stringent standard
What brand of lock does a WR3 or 1054WB key blank fit? - --CORRECT
ANSWER--Weiser
A classroom function lock is designed so that: - --CORRECT ANSWER--A key is
required to lock the room
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
and Answers
What joins a mortise cylinder to a mortise lock? - --CORRECT ANSWER--
Threads on the cylinder and a set screw
The key shown above matches the locks manufactured by - --CORRECT
ANSWER--schlage
What type of key normally must be duplicated with an end mill cutter? - --
CORRECT ANSWER--Paracentric
What is needed to remove the outside knob of a Schlage entrance set? - --
CORRECT ANSWER--Key and pin punch
A licensee who moves or changes employers shall notify the Oklahoma
Department of Labor within how many days? - --CORRECT ANSWER--14
A technician is weak, having chills and cannot seem to get enough to drink. What
is the likely cause of the technician's symptoms? - --CORRECT ANSWER--High
blood sugar
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
, The Oklahoma Alarm and Locksmith Industry Act applies to: - --CORRECT
ANSWER--Persons who sell, install and service alarm systems
What type of tumbler is most commonly used in a file cabinet lock? - --CORRECT
ANSWER--Short wafer
What is the maximum amount of administrative fines that can be levied against any
person for violations of the Oklahoma Alarm and Locksmith Industry Act? - --
CORRECT ANSWER--$1,000
coordinator is required on a pair of fire doors having: - --CORRECT ANSWER--
An overlapping astragal
With proper care, which cutter material typically provides the longest use? - --
CORRECT ANSWER--Carbide
Thru-bolt trim is used on many mortise locks to: - --CORRECT ANSWER--Make
the installation look better
If a conflict exists between adopted references, the reference that applies shall be
the one: - --CORRECT ANSWER--With the more stringent standard
What brand of lock does a WR3 or 1054WB key blank fit? - --CORRECT
ANSWER--Weiser
A classroom function lock is designed so that: - --CORRECT ANSWER--A key is
required to lock the room
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
