AVIXA CTS-D: Structural and Mechanical
Considerations Questions And Correct Detailed
Answers (Verified Answers) | Graded A | New
Update 2025
EMP - Energy Management Plan - ANSWER Identifies Energy Reduction Points
EMM - Energy Management Manager - ANSWER A role that provides
leadership and management of the system
Wiring Diagram in terms of Energy management - ANSWER illustrates how
power to AV components is controlled and monitored and how the energy
management system is connected to the AV system
Visual Display in terms of Energy Management - ANSWER Shows users and
management the continuous power usage of the AV system
Use of Automated Devices and Power-State Changes in terms of energy
management - ANSWER Ensure the AV system is energy-efficient
Method for Continuous Power Measurement - ANSWER Collect power
consumption data
End-user Operation Training - ANSWER leads to understanding, participation,
and behavior modification
, Tree ideas to the energy management standard - ANSWER Data collection,
automation, education and training
How many requirements are there in the ANSI/INFOCOMM 4 :2012 Energy
management standard - ANSWER 7
How many design considerations are needed to achieve the ANSI/INFOCOMM 4
:2012 Energy management standard - ANSWER 21
Wet Systems - ANSWER fire protection systems that use water that is always
under pressur
Dry Systems - ANSWER do not have water constantly present in the system
and are pressurized by the fire department in the event of a fire.
Chemical Systems - ANSWER Replace the room air with fire inhibiting gas, such
as halon, CO2, or halocarbon agents (that contain chlorine, fluorine, or iodine
either individually or in some combination).
Inert Gas Systems - ANSWER Designed to reduce the ambient oxygen
concentration in a protected space to between 10 -14%, a level that is breathable
but will not support flaming combustion. These systems use inert gases such as
argon and nitrogen, either as mixtures or alone.
What to do when firestop is in your path. - ANSWER Scrape off as little firestop
as necessary, and make sure you replace it immediately.
Considerations Questions And Correct Detailed
Answers (Verified Answers) | Graded A | New
Update 2025
EMP - Energy Management Plan - ANSWER Identifies Energy Reduction Points
EMM - Energy Management Manager - ANSWER A role that provides
leadership and management of the system
Wiring Diagram in terms of Energy management - ANSWER illustrates how
power to AV components is controlled and monitored and how the energy
management system is connected to the AV system
Visual Display in terms of Energy Management - ANSWER Shows users and
management the continuous power usage of the AV system
Use of Automated Devices and Power-State Changes in terms of energy
management - ANSWER Ensure the AV system is energy-efficient
Method for Continuous Power Measurement - ANSWER Collect power
consumption data
End-user Operation Training - ANSWER leads to understanding, participation,
and behavior modification
, Tree ideas to the energy management standard - ANSWER Data collection,
automation, education and training
How many requirements are there in the ANSI/INFOCOMM 4 :2012 Energy
management standard - ANSWER 7
How many design considerations are needed to achieve the ANSI/INFOCOMM 4
:2012 Energy management standard - ANSWER 21
Wet Systems - ANSWER fire protection systems that use water that is always
under pressur
Dry Systems - ANSWER do not have water constantly present in the system
and are pressurized by the fire department in the event of a fire.
Chemical Systems - ANSWER Replace the room air with fire inhibiting gas, such
as halon, CO2, or halocarbon agents (that contain chlorine, fluorine, or iodine
either individually or in some combination).
Inert Gas Systems - ANSWER Designed to reduce the ambient oxygen
concentration in a protected space to between 10 -14%, a level that is breathable
but will not support flaming combustion. These systems use inert gases such as
argon and nitrogen, either as mixtures or alone.
What to do when firestop is in your path. - ANSWER Scrape off as little firestop
as necessary, and make sure you replace it immediately.
