• Wrong document? Swap it for free
  • Written by students who passed
  • Immediately available after payment
  • Read online or as PDF
Sell
Where do you study
Your language
Document preview thumbnail
Preview 4 out of 52 pages
Exam (elaborations)

Millwright study with correct answers 2025

Document preview thumbnail
Preview 4 out of 52 pages

Millwright study with correct answers 2025

Content preview

Millwright study with correct
answers 2025




What is the biggest causes of injuries on the job - CORRECT ANSWER-Carelessness
or horseplay

Rags used to clean up solvents and oils must be disposed of in: - CORRECT
ANSWER-An "Approved metal container"

All personal protective equipment (PPE) must be: - CORRECT ANSWER-CSA Aproved

A green tag on boots indicates that: - CORRECT ANSWER-The boots are CSA
aprroved

People that are the persons who have locks on a locked out piece of equipment are
known as: - CORRECT ANSWER-Authorized people

Double insulated tools are: - CORRECT ANSWER-Some hand-held tools which have
an insulated handle or housing

Zero mechanical state/Zero energy state refers to: - CORRECT ANSWER-A piece of
equipment which has been locked out and all its sources of energy have been made
inoperative

Green Triangle "A" - CORRECT ANSWER-Fires involving ordinary combustibles (wood,
paper, organics)

,Red Square "B" - CORRECT ANSWER-Fires involving flammable or combustible
vapours

Blue Circle "C" - CORRECT ANSWER-Fires involving energized electrical equipment

Yellow Star "C" - CORRECT ANSWER-fires involving combustible metals (Magnesium
Aluminium)

Fire Extinguishers:

P
A
S
S - CORRECT ANSWER-P- Pull the pin
A - Aim the nozzle at the base of the flame
S - Squeeze the trigger
S - Sweep the nozzle at the base of the flame

MSDS Stands for - CORRECT ANSWER-Material Safety Data Sheets

MSDS's must be: - CORRECT ANSWER-MSDS's must be replaced every 3 years and
you must know where they are in your workplace

What determines your PPE? - CORRECT ANSWER-The hazards, your PPE is
determined by the hazards

What attributes must a millwrights clothing have? - CORRECT ANSWER-your clothing
should provide sufficient insulation, be flame retardant, and smooth

3 Things you have the right to know in regards to safe work are: - CORRECT
ANSWER-1) you have the right to know (hazards of the work)
2) you have the right to refuse (unsafe work)
3) you have the right to participate (safety planning)

Flashpoint is: - CORRECT ANSWER-The lowest temperature at which vapours from a
volatile liquid will ignite

The Work Place Hazardous Information System

(WHIMIS) deals with: - CORRECT ANSWER-WHIMIS covers the following areas:
-Hazard identification
-Labeling controlled products
-Provisions for MSDS's
-Education and training
-Ingredient disclosure
-Protection of product "trade secrets"

,Cohesive Forces are: - CORRECT ANSWER-The force at which molecules in matter
are attracted to each other. For example a large load can be hung from steel cable due
to the cables steel strong cohesive force.

Adhesive Forces are: - CORRECT ANSWER-Molecules which are not alike will often
share a force of attraction similar to cohesion. This force is known as adhesive force.
Example: paint to concrete

Ultimate stress: - CORRECT ANSWER-The point at which material ruptures/fails under
stress loads

Tensile strength: - CORRECT ANSWER-The resistance ability of materials to being
pulled apart.

Compressive strength - CORRECT ANSWER-The resistance to compressive forces.
Example: concretes ability to hold loads

Shear strength - CORRECT ANSWER-The ability of a material to resist forces that try to
slide part of an object along itself (clean break)

Fatigue Strength - CORRECT ANSWER-The ability to withstand repeated alternating
stresses

Elasticity - CORRECT ANSWER-The ability of material to return to its original
dimensions after it has been affected by force

Elastic limit (yield Strength) - CORRECT ANSWER-The maximum force a solid can
withstand before becoming permanently deformed

Plasticity - CORRECT ANSWER-The ability for a material to retain shape permanently
after a deforming force is removed. Example: metal is heated to increase its plasticity

Ductility - CORRECT ANSWER-The ability to stretch and maintain a new shape. For
example material can be drawn into a wire. The finer the wire can be produced the more
ductile the material is

Malleability - CORRECT ANSWER-The ability of a material to be permanently deformed
by compressive forces. Examples would be rolling, pressing and forging processes.

Brittleness - CORRECT ANSWER-material which breaks without noticeable plastic
deformation. A substance may be quite hard but lack strength due to brittleness. An
example would be glass

Toughness - CORRECT ANSWER-The ability of a material to withstand shockloads

, Hardness - CORRECT ANSWER-Materials ability to resist force of penetration.
Penetration is an attempt to push molecules apart

Electrical conductivity - CORRECT ANSWER-The ability of a material to conduct
electricity
- Conductors (Copper, Aluminium, silver)
-Insulators (Rubber, Bakelite, Glass, Oil)

Thermal conductivity - CORRECT ANSWER-Determines the rate of heat flow through a
material.

Electrochemical Reaction of metals - CORRECT ANSWER-When two different metals
are in contact with each other and water is present an electric current is produced. The
electron flow has a chemical corrosion effect

Volatility - CORRECT ANSWER-A measure of how quickly a liquid will evaporate. A
liquid is said to be highly volatile if it changes from a liquid to a gas quickly

Viscosity - CORRECT ANSWER-A measure of a liquids resistance to flow. The higher
the viscosity of a liquid, the greater its resistance to being poured

Bi-Metallic Strip Thermometers - CORRECT ANSWER-A strip of two dissimilar metals
bonded together. The two metals have different thermal conductivity properties as one
will stay rigid and the other will bend.

Example: a temperature gauge with a pointer.

Pyrometers - CORRECT ANSWER-An instrument that measures temperature beyond
the range of normal thermometer. There are various types of pyrometers:

-Optical pyrometer: measures temperature through color observation (Flame Scanner)
-Thermoelectric pyrometer: Resistance thermometers. As their temperature changes
there is a direct change in resistance. (Flame Rod)

Thermocouples - CORRECT ANSWER-Consist of an electrical circuit terminating with
the junction of 2 different metals, (Hot Junction). When the temperature of the junction is
raised a voltage is produced. The hotter the temperature the larger the voltage.

Coefficients of Expansion - CORRECT ANSWER-Predict the dimension changes of a
material as the temperature changes. Example Coefficient for steel - 0.000,012 per
degree Celsius

Heat Transfer - CORRECT ANSWER-Heat flows from one object to another in 3 forms:
-Conduction
-Convection
-Radiation

Document information

Uploaded on
July 31, 2025
Number of pages
52
Written in
2024/2025
Type
Exam (elaborations)
Contains
Questions & answers
$15.49

Wrong document? Swap it for free Within 14 days of purchase and before downloading, you can choose a different document. You can simply spend the amount again.
Written by students who passed
Immediately available after payment
Read online or as PDF

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
LYKTETSOS
2.0
(1)
Sold
20
Followers
8
Items
1541
Last sold
1 week ago



Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Working on your references?

Create accurate citations in APA, MLA and Harvard with our free citation generator.

Working on your references?

Frequently asked questions