REVIT EXAM
Revit Certification exam prep 2025
Where is the keynote numbering method controlled? - Keynoting settings
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - The Select Links
option is disabled.
When there are numerous types of lighting fixtures available, how can a user narrow the
list? - Use the Search field.
An electrical designer is creating a panel schedule template and is trying to drag the right
boundary line to make the panel schedule wider. The designer is unable to do so. What
should the designer do? - Open the Set Template Options and increase the Total width.
An electrical designer needs to set the Connection Type for a circuit to Feed Through
Lugs. What does the designer need to do to enable this functionality? - Select the panel
and enable Feed Through Lugs in the Properties palette.
An electrical designer is tagging conduit in a building model. Some of the conduit is at an
angle. The designer wants the tags to rotate with the conduit. What should the designer
do? - Open the tag family and enable Rotate with component.
An electrical designer enables Section Box for a 3D view, but the section box is not
visible in the view. Which setting should the designer check? - Visibility/Graphic
Overrides
When hovering the cursor over a component on a circuit, which key can be used to
highlight the circuit? - Tab
REVIT EXAM
, REVIT EXAM
An electrical designer is reviewing a building model and wants to see all the circuits
along with the Load for each system. Where can the designer review this information? -
System Browser
An electrical designer wants to associate the Elevation from Level parameter for several
receptacles in a project to a single parameter. What type of parameter should the designer
create? - Global
What is the recommended best practice for creating a family? - Reference planes >
dimensions > parameters > geometry
An electrical designer wants to add a parameter to system family categories and loadable
family categories. What type of parameter should the designer create? - Project
An electrical designer is creating an unground conduit plan. Which view setting should
the designer adjust to show conduit beneath the associated level of the view? - View
Range
An electrical designer selects a run of conduit and changes the phase status to
demolished. After doing this, an error appears stating that the elements need to be
disconnected. Why does this error occur? - Demolished elements cannot be connected.
An electrical designer places hosted lighting fixtures in the ceiling of a linked
architectural model. The designer then removes the linked architectural model. What
happens to the lighting fixtures? - The lighting fixtures become orphaned.
An electrical designer modifies a panel schedule template, but the panel schedules
associated with the template do not update. What should the designer do? - Select the
panels in the Manage Panel Schedule Templates dialog and click Update Schedules.
REVIT EXAM
Revit Certification exam prep 2025
Where is the keynote numbering method controlled? - Keynoting settings
An electrical designer is working in a project with a linked architectural Revit model. The
designer is unable to select the link. What is causing this condition? - The Select Links
option is disabled.
When there are numerous types of lighting fixtures available, how can a user narrow the
list? - Use the Search field.
An electrical designer is creating a panel schedule template and is trying to drag the right
boundary line to make the panel schedule wider. The designer is unable to do so. What
should the designer do? - Open the Set Template Options and increase the Total width.
An electrical designer needs to set the Connection Type for a circuit to Feed Through
Lugs. What does the designer need to do to enable this functionality? - Select the panel
and enable Feed Through Lugs in the Properties palette.
An electrical designer is tagging conduit in a building model. Some of the conduit is at an
angle. The designer wants the tags to rotate with the conduit. What should the designer
do? - Open the tag family and enable Rotate with component.
An electrical designer enables Section Box for a 3D view, but the section box is not
visible in the view. Which setting should the designer check? - Visibility/Graphic
Overrides
When hovering the cursor over a component on a circuit, which key can be used to
highlight the circuit? - Tab
REVIT EXAM
, REVIT EXAM
An electrical designer is reviewing a building model and wants to see all the circuits
along with the Load for each system. Where can the designer review this information? -
System Browser
An electrical designer wants to associate the Elevation from Level parameter for several
receptacles in a project to a single parameter. What type of parameter should the designer
create? - Global
What is the recommended best practice for creating a family? - Reference planes >
dimensions > parameters > geometry
An electrical designer wants to add a parameter to system family categories and loadable
family categories. What type of parameter should the designer create? - Project
An electrical designer is creating an unground conduit plan. Which view setting should
the designer adjust to show conduit beneath the associated level of the view? - View
Range
An electrical designer selects a run of conduit and changes the phase status to
demolished. After doing this, an error appears stating that the elements need to be
disconnected. Why does this error occur? - Demolished elements cannot be connected.
An electrical designer places hosted lighting fixtures in the ceiling of a linked
architectural model. The designer then removes the linked architectural model. What
happens to the lighting fixtures? - The lighting fixtures become orphaned.
An electrical designer modifies a panel schedule template, but the panel schedules
associated with the template do not update. What should the designer do? - Select the
panels in the Manage Panel Schedule Templates dialog and click Update Schedules.
REVIT EXAM
