CM 2215 EXAM MOCK QUESTIONS AND
100% CORRECT ANSWERS!!
What are the 3 parts of an OSHA inspection?
Opening Conference, Walkaround Inspection, Closing Conference
Only _____________ companies may receive a focused OSHA inspection.
Qualified
What does the CSHO check for during a focused inspection?
Effective safety and health program
What else does the CSHO check?
Competent persons on-site supervising safety
What is the third thing the CSHO checks for?
Control of most hazardous operations
If a company doesn't qualify for a focused inspection, they get a ____________ inspection.
Comprehensive
What is the purpose of an OSHA compliance directive (CPL)?
To ensure uniform enforcement on multi-employer sites
Creating Employer
Caused the hazard
Exposing Employer
Employees were exposed to the hazard
Correcting Employer
Responsible for fixing the hazard
Controlling Employer
, General authority on site (e.g., GC)
What must an employer show to defend against a citation?
Did not create the hazard
Second part of citation defense
Employees were not exposed to the hazard
Third part of citation defense
Took reasonable steps to prevent or correct the hazard
Fourth part of citation defense
Took reasonable steps to discover the hazard
OSHA defines an excavation as any man-made cut, cavity, trench, or depression formed by
______ removal.
Earth
A trench is defined as a narrow excavation that is ______ than it is wide.
Deeper
A trench cannot be wider than _____ feet.
15 feet
Cave-in protection is required for excavations deeper than ____ feet (unless solid rock).
5 feet
A ladder must be provided every _____ feet for excavations over ____ feet deep.
25 feet; 4 feet
Spoil piles and equipment must be kept ____ feet from the edge of the excavation.
2 feet
Excavation inspections must be done ______ and before starting work.
100% CORRECT ANSWERS!!
What are the 3 parts of an OSHA inspection?
Opening Conference, Walkaround Inspection, Closing Conference
Only _____________ companies may receive a focused OSHA inspection.
Qualified
What does the CSHO check for during a focused inspection?
Effective safety and health program
What else does the CSHO check?
Competent persons on-site supervising safety
What is the third thing the CSHO checks for?
Control of most hazardous operations
If a company doesn't qualify for a focused inspection, they get a ____________ inspection.
Comprehensive
What is the purpose of an OSHA compliance directive (CPL)?
To ensure uniform enforcement on multi-employer sites
Creating Employer
Caused the hazard
Exposing Employer
Employees were exposed to the hazard
Correcting Employer
Responsible for fixing the hazard
Controlling Employer
, General authority on site (e.g., GC)
What must an employer show to defend against a citation?
Did not create the hazard
Second part of citation defense
Employees were not exposed to the hazard
Third part of citation defense
Took reasonable steps to prevent or correct the hazard
Fourth part of citation defense
Took reasonable steps to discover the hazard
OSHA defines an excavation as any man-made cut, cavity, trench, or depression formed by
______ removal.
Earth
A trench is defined as a narrow excavation that is ______ than it is wide.
Deeper
A trench cannot be wider than _____ feet.
15 feet
Cave-in protection is required for excavations deeper than ____ feet (unless solid rock).
5 feet
A ladder must be provided every _____ feet for excavations over ____ feet deep.
25 feet; 4 feet
Spoil piles and equipment must be kept ____ feet from the edge of the excavation.
2 feet
Excavation inspections must be done ______ and before starting work.
