1|Page
Gleim’s FAA Final Exam Newest 2025 Complete 100
Questions And Correct Detailed Answers (Verified
Answers) |Already Graded A+
What is an important airspeed limitation that is not color coded
on airspeed indicators?
A) Never exceed speed.
B) Maximum structural cruising speed.
C) Maneuvering speed. - ANSWER-C) Maneuvering speed.
The maneuvering speed of an airplane is an important airspeed
limitation not color coded on the airspeed. It is found in the
airplane manual or Placarded in the cockpit. Maneuvering speed
is the maximum speed at which full deflection of the airplane
controls can be made without incurring structural damage.
Maneuvering speed or less should be held in turbulent air to
prevent structural damage due to excessive loads.
(Refer to figure 3 Altimeter)
Altimeter 1 indicates
,2|Page
A) 500 Feet
B) 1,500 Feet
C) 10,500 Feet - ANSWER-C) 10,500 Feet
The altimeter has three needles, The short needle indicates
10,000 foot intervals, the middle length needle indicates 1,000
foot intervals, and the long needle indicates 100 foot intervals,
In altimeter 1 The shortest needle is on 1 which indicates about
10,000 feet. The middle length needle indicates half way
between zero and 1, which is 500 feet. This is confirmed by the
longest needle on 5, indicating 500 feet I.e. 10,500 feet
(Refer to figure 3 Altimeter)
Altimeter 3 indicates
A) 9,500 Feet
B) 10,950 Feet
C) 15,940 Feet - ANSWER-A) 9,500 Feet
Altimeter 3 indicates 9,500 Feet because the shortest needles i
near the 1 (i.e. about 10,000 feet). the middle needle is between
,3|Page
9 and the 0. indicating between 9,000 and 10,000 feet. and the
long needle is on 5, indicating 500 feet.
(Refer to figure 3 Altimeter)
Which altimeter(s) indicates (s) more than 10,000 feet?
A) 1, 2, and 3
B) 1 and 2 only
C) 1 only - ANSWER-B) 1 and 2 only
(Refer to figure 3 Altimeter)
Altimeter 2 indicates
A) 1,500 Feet
B) 4,500 Feet
C) 14,500 Feet - ANSWER-C) 14,500 Feet
Altimeter 2 indicates 14,500 feet because the shortest needle is
between line 1 and the 2 indicating about 15,000 feet. the middle
needle is between 4 and 5, indicating 4,500 feet and the long
needle is a 5, indicating 500 feet. i.e. 14,500 feet
, 4|Page
(refer to figure 82 altimeter)
Altimeter 3 indicates
A) 9,500 feet
B) 10,500 feet
C) 4,500 feet - ANSWER-A) 9,500 feet
The long, thin needle is past the fourth tick mark and just befor
the 1 (<10,000)
(refer to figure 82 altimeter)
Altimeter 1 indicates
A) 4,500 feet
B) 1,500 feet
C) 500 feet - ANSWER-C) 500 feet
The long, thin needle is between 0 and 1 (<10,000) the short
needle is between 0 and 1 (<1,000) and the long , wide needle is
on 5 (500). Therefor, the altimeter indicates 500 feet.
Gleim’s FAA Final Exam Newest 2025 Complete 100
Questions And Correct Detailed Answers (Verified
Answers) |Already Graded A+
What is an important airspeed limitation that is not color coded
on airspeed indicators?
A) Never exceed speed.
B) Maximum structural cruising speed.
C) Maneuvering speed. - ANSWER-C) Maneuvering speed.
The maneuvering speed of an airplane is an important airspeed
limitation not color coded on the airspeed. It is found in the
airplane manual or Placarded in the cockpit. Maneuvering speed
is the maximum speed at which full deflection of the airplane
controls can be made without incurring structural damage.
Maneuvering speed or less should be held in turbulent air to
prevent structural damage due to excessive loads.
(Refer to figure 3 Altimeter)
Altimeter 1 indicates
,2|Page
A) 500 Feet
B) 1,500 Feet
C) 10,500 Feet - ANSWER-C) 10,500 Feet
The altimeter has three needles, The short needle indicates
10,000 foot intervals, the middle length needle indicates 1,000
foot intervals, and the long needle indicates 100 foot intervals,
In altimeter 1 The shortest needle is on 1 which indicates about
10,000 feet. The middle length needle indicates half way
between zero and 1, which is 500 feet. This is confirmed by the
longest needle on 5, indicating 500 feet I.e. 10,500 feet
(Refer to figure 3 Altimeter)
Altimeter 3 indicates
A) 9,500 Feet
B) 10,950 Feet
C) 15,940 Feet - ANSWER-A) 9,500 Feet
Altimeter 3 indicates 9,500 Feet because the shortest needles i
near the 1 (i.e. about 10,000 feet). the middle needle is between
,3|Page
9 and the 0. indicating between 9,000 and 10,000 feet. and the
long needle is on 5, indicating 500 feet.
(Refer to figure 3 Altimeter)
Which altimeter(s) indicates (s) more than 10,000 feet?
A) 1, 2, and 3
B) 1 and 2 only
C) 1 only - ANSWER-B) 1 and 2 only
(Refer to figure 3 Altimeter)
Altimeter 2 indicates
A) 1,500 Feet
B) 4,500 Feet
C) 14,500 Feet - ANSWER-C) 14,500 Feet
Altimeter 2 indicates 14,500 feet because the shortest needle is
between line 1 and the 2 indicating about 15,000 feet. the middle
needle is between 4 and 5, indicating 4,500 feet and the long
needle is a 5, indicating 500 feet. i.e. 14,500 feet
, 4|Page
(refer to figure 82 altimeter)
Altimeter 3 indicates
A) 9,500 feet
B) 10,500 feet
C) 4,500 feet - ANSWER-A) 9,500 feet
The long, thin needle is past the fourth tick mark and just befor
the 1 (<10,000)
(refer to figure 82 altimeter)
Altimeter 1 indicates
A) 4,500 feet
B) 1,500 feet
C) 500 feet - ANSWER-C) 500 feet
The long, thin needle is between 0 and 1 (<10,000) the short
needle is between 0 and 1 (<1,000) and the long , wide needle is
on 5 (500). Therefor, the altimeter indicates 500 feet.
