Page |1
Colorado Real Estate Questions and
Correct Answers/ Latest Update / Already
Graded
The three most common methods of legal land description are metes
and bounds, rectangular (government) survey, and lot and block
(recorded plat). True or false?
Ans: True. The three most common methods of legal land
description are indeed metes and bounds, rectangular
(government) survey, and lot and block (recorded plat). These
methods are widely used to define and describe property
boundaries in real estate transactions.
The metes-and-bounds method of land description is one of two
methods that uses "starting at" or "commencing at." True or false?
Ans: True. The metes-and-bounds method of land description
typically begins with terms like "starting at" or "commencing
at" to specify a precise starting point. This method describes
property boundaries by using physical landmark s, compass
directions, and distances.
A section is 1 mile by 1 mile and contains 640 acres. True or false?
Ans: True. A section is indeed 1 mile by 1 mile and contains 640
acres. This is a standard measurement in the rectangular
All rights reserved © 2025/ 2026 |
, Page |2
(government) survey system used for land description in the
United States.
A township is a square formed by the meeting of metes and bounds (1
mile by 1 mile). True or false?
Ans: False. A township is not defined by the metes-and-bounds
system. In the rectangular (government) survey system, a
township is a square that measures 6 miles by 6 miles, not 1
mile by 1 mile, and contains 36 sections (each section being 1
mile by 1 mile, or 640 acres).
The N 1/2 of the SE 1/4 of the SW 1/2 of a section has 40 acres. True or
false?
Ans: True.
To determine the acreage, we start with the total acres in a
section (640 acres) and divide accordingly:
SW 1/4 of a section = 640 acres ÷ 4 = 160 acres.
SE 1/4 of that 160 acres = 160 acres ÷ 4 = 40 acres.
N 1/2 of that 40 acres = 40 acres ÷ 2 = 20 acres.
So, the correct answer is False because the area described
actually contains 20 acres, not 40 acres.
All rights reserved © 2025/ 2026 |
, Page |3
A subdivision plat is a map that is created by engineers and surveyors
to show streets and the location and boundaries of individual lots in a
subdivision. True or false?
Ans: True.
A subdivision plat is indeed a map created by engineers and
surveyors that shows the layout of streets, the location, and
boundaries of individual lots in a subdivision. This map is
typically recorded with local government offices to legally
establish lot divisions and public access within the subdivision.
The main purpose of a survey is to create or confirm a legal description.
True or false?
Ans: True. The main purpose of a survey is to create or confirm
a legal description of a property. A survey precisely measures
the boundaries, identifies any encroachments or easements,
and ensures that the property's legal description accurately
reflects its physical boundaries and dimensions.
An encroachment would be revealed in a survey or an improvement
location certificate. True or false?
Ans: True.
An encroachment—an unauthorized extension of a structure
onto another person's property—would indeed be revealed in a
survey or an improvement location certificate. These
All rights reserved © 2025/ 2026 |
, Page |4
documents identify the exact boundaries and the location of
structures on the property, helping to reveal any potential
encroachments.
A 50-by-80-foot lot has 4,000 square feet. True or false?
Ans: True.
To find the square footage of a lot that is 50 feet by 80 feet, you
multiply the length by the width:
50 feet×80 feet=4,000 square feet50 \text{ feet} \times 80 \text{
feet} = 4,000 \text{ square feet}50 feet×80 feet=4,000 square
feet
So, the statement is true.
A legal description that uses compass degrees and measurements is?
Ans: A legal description that uses compass degrees and
measurements is known as the metes-and-bounds method. This
system describes the boundaries of a property using directions
(compass bearings) and distances, often beginning from a
specific starting point and using physical landmarks or points
along the boundary line.
A section contains how many acres?
Ans: A section contains 640 acres.
All rights reserved © 2025/ 2026 |
Colorado Real Estate Questions and
Correct Answers/ Latest Update / Already
Graded
The three most common methods of legal land description are metes
and bounds, rectangular (government) survey, and lot and block
(recorded plat). True or false?
Ans: True. The three most common methods of legal land
description are indeed metes and bounds, rectangular
(government) survey, and lot and block (recorded plat). These
methods are widely used to define and describe property
boundaries in real estate transactions.
The metes-and-bounds method of land description is one of two
methods that uses "starting at" or "commencing at." True or false?
Ans: True. The metes-and-bounds method of land description
typically begins with terms like "starting at" or "commencing
at" to specify a precise starting point. This method describes
property boundaries by using physical landmark s, compass
directions, and distances.
A section is 1 mile by 1 mile and contains 640 acres. True or false?
Ans: True. A section is indeed 1 mile by 1 mile and contains 640
acres. This is a standard measurement in the rectangular
All rights reserved © 2025/ 2026 |
, Page |2
(government) survey system used for land description in the
United States.
A township is a square formed by the meeting of metes and bounds (1
mile by 1 mile). True or false?
Ans: False. A township is not defined by the metes-and-bounds
system. In the rectangular (government) survey system, a
township is a square that measures 6 miles by 6 miles, not 1
mile by 1 mile, and contains 36 sections (each section being 1
mile by 1 mile, or 640 acres).
The N 1/2 of the SE 1/4 of the SW 1/2 of a section has 40 acres. True or
false?
Ans: True.
To determine the acreage, we start with the total acres in a
section (640 acres) and divide accordingly:
SW 1/4 of a section = 640 acres ÷ 4 = 160 acres.
SE 1/4 of that 160 acres = 160 acres ÷ 4 = 40 acres.
N 1/2 of that 40 acres = 40 acres ÷ 2 = 20 acres.
So, the correct answer is False because the area described
actually contains 20 acres, not 40 acres.
All rights reserved © 2025/ 2026 |
, Page |3
A subdivision plat is a map that is created by engineers and surveyors
to show streets and the location and boundaries of individual lots in a
subdivision. True or false?
Ans: True.
A subdivision plat is indeed a map created by engineers and
surveyors that shows the layout of streets, the location, and
boundaries of individual lots in a subdivision. This map is
typically recorded with local government offices to legally
establish lot divisions and public access within the subdivision.
The main purpose of a survey is to create or confirm a legal description.
True or false?
Ans: True. The main purpose of a survey is to create or confirm
a legal description of a property. A survey precisely measures
the boundaries, identifies any encroachments or easements,
and ensures that the property's legal description accurately
reflects its physical boundaries and dimensions.
An encroachment would be revealed in a survey or an improvement
location certificate. True or false?
Ans: True.
An encroachment—an unauthorized extension of a structure
onto another person's property—would indeed be revealed in a
survey or an improvement location certificate. These
All rights reserved © 2025/ 2026 |
, Page |4
documents identify the exact boundaries and the location of
structures on the property, helping to reveal any potential
encroachments.
A 50-by-80-foot lot has 4,000 square feet. True or false?
Ans: True.
To find the square footage of a lot that is 50 feet by 80 feet, you
multiply the length by the width:
50 feet×80 feet=4,000 square feet50 \text{ feet} \times 80 \text{
feet} = 4,000 \text{ square feet}50 feet×80 feet=4,000 square
feet
So, the statement is true.
A legal description that uses compass degrees and measurements is?
Ans: A legal description that uses compass degrees and
measurements is known as the metes-and-bounds method. This
system describes the boundaries of a property using directions
(compass bearings) and distances, often beginning from a
specific starting point and using physical landmarks or points
along the boundary line.
A section contains how many acres?
Ans: A section contains 640 acres.
All rights reserved © 2025/ 2026 |
