YEAR 1 FINAL EXAM JATC QUESTIONS
WITH 100% COMPLETE SOLUTIONS!!
1 of 92
Term
If a person multiplies one side of an equation by five, what must he
or she do to the other side of the equation?
Give this one a try later!
divide by 10 divide by 15
multiply by 5 subtract 5
, Don't know?
2 of 92
Term
PVC is a form of what type of conduit?
Give this one a try later!
intermediate metal conduit rigid non-metallic conduit
liquidtight flexible metal conduit threaded steel intermediate conduit
Don't know?
3 of 92
Term
To reduce a fraction, divide the numerator and denominator
by the ?
.
Give this one a try later!
half the number smallest fraction
, same number double the number
Don't know?
4 of 92
Term
A ladder top should extend at least ? above the roof edge
of a building when used as access to the roof of a building.
Give this one a try later!
34" 48"
32" 36"
Don't know?
5 of 92
Term
A coating of joint compound on the surface of a
conductor, prevents a(n) ? from reforming after the
installation process.
Give this one a try later!
, magnesium oxide
ferrite hydrogen
Don't know?
6 of 92
Term
A "plumb 30" or a "plumb 45" bender will reliably produce an
approximate 30°- or 45°-bend when the conduit is
horizontal and the handle is pulled up so that the handle
is vertical or plumb.
Give this one a try later!
False
Note: Double insulation does not provide protection against defective
cords and plugs or against heavy moisture conditions.
Even though it appears that the actual value required is 17 15/16", it is best
to
shorten the measurement slightly to compensate for the fact that the
connector will not allow the end of the conduit to be inserted even
with the side of the box.
The correct answer is: 17 7/8"
False
Note: The bender must face in the same direction for both bends.
WITH 100% COMPLETE SOLUTIONS!!
1 of 92
Term
If a person multiplies one side of an equation by five, what must he
or she do to the other side of the equation?
Give this one a try later!
divide by 10 divide by 15
multiply by 5 subtract 5
, Don't know?
2 of 92
Term
PVC is a form of what type of conduit?
Give this one a try later!
intermediate metal conduit rigid non-metallic conduit
liquidtight flexible metal conduit threaded steel intermediate conduit
Don't know?
3 of 92
Term
To reduce a fraction, divide the numerator and denominator
by the ?
.
Give this one a try later!
half the number smallest fraction
, same number double the number
Don't know?
4 of 92
Term
A ladder top should extend at least ? above the roof edge
of a building when used as access to the roof of a building.
Give this one a try later!
34" 48"
32" 36"
Don't know?
5 of 92
Term
A coating of joint compound on the surface of a
conductor, prevents a(n) ? from reforming after the
installation process.
Give this one a try later!
, magnesium oxide
ferrite hydrogen
Don't know?
6 of 92
Term
A "plumb 30" or a "plumb 45" bender will reliably produce an
approximate 30°- or 45°-bend when the conduit is
horizontal and the handle is pulled up so that the handle
is vertical or plumb.
Give this one a try later!
False
Note: Double insulation does not provide protection against defective
cords and plugs or against heavy moisture conditions.
Even though it appears that the actual value required is 17 15/16", it is best
to
shorten the measurement slightly to compensate for the fact that the
connector will not allow the end of the conduit to be inserted even
with the side of the box.
The correct answer is: 17 7/8"
False
Note: The bender must face in the same direction for both bends.
