CR101B Introduction to Collision Repair Exam Questions Answered Correctly Rated A+
Which of these warnings is shown in the symbol below? - Answers Flammable
The reason a safety cable is used on a pulling chain is to: - Answers help reduce backlash if the chain
comes loose.
Why are a type of lineman's gloves recommended when working with high voltage parts? - Answers
They are electrically insulated.
Which of these safety items is recommended when doing the process shown in the photo below? (Using
a hammer & dolly) - Answers Safety glasses
Which of these warnings is shown in the symbol below? - Answers Poison
Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) -
Answers Sparking from the welding process
Which of these safety items is missing on the technician in the photo below? (Using angle grinder) -
Answers Full-face shield
Which of these safety items is missing on the technician in the photo below? (Wiping a car down with
something) - Answers Protective gloves
Which of these sheathing colors is commonly used to designate high voltage wiring? - Answers Bright
orange
Which of these safety equipment items avoids flash burn when observing the task shown in the photo
below? (welding) - Answers Welding helmet
Technician A says that employers are allowed to remove information from an SDS for use in the work
place. Technician B says that employers should retain an SDS for 30 years after the product is no longer
used. Who is right? - Answers B only
A carcinogen is a substance that causes: - Answers cancer
Olfactory fatigue is when a person: - Answers can no longer smell a chemical after exposure.
A Class B fire extinguisher could be used on a: - Answers burning solvent.
Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - Answers
Release of isocyanate vapors
Hepatitis B is considered: - Answers a blood borne pathogen.
Information on cleaning a hazardous material spill can be found in what section of an SDS? - Answers
Accidental Release Measures
, If a container does not have a label, a technician should: - Answers avoid handling material until
identified.
Which of these should be worn when using a half- mask supplied-air respirator during refinishing? -
Answers Goggles
A flammable material: - Answers can easily catch fire and burn rapidly or explosively.
The process being shown in the photo above is: (body filler) - Answers applying body filler.
A supplement is a: - Answers change to the damage report.
Which of these damage conditions is illustrated above? (Bend in frame rail) - Answers Mash
The imaginary plane shown in red in the illustration above is used to measure: (through center of vehicle
- front to rear) - Answers width
The welded joint shown in the illustration above is: (two pieces joined together w/backing) - Answers a
butt joint with backing.
The technician in the photo above is marking: (yellow marker line on rail) - Answers the cut location on
the damaged rail.
The process being done in the photo above is: (car on lift with hanging measuring devices) - Answers
measuring a vehicle using a three-dimensional system.
The acronym R&R refers to: - Answers Remove and replace
Which of these processes is being done in the photo above? (w/round end plastic welding) - Answers
Plastic welding
What is the repair step being done by the technician in the photo above? (technician holding front
windshield) - Answers Dry setting the glass
Which of these is designed to protect the vehicle from sparks? A) plastic sheet for seats B) Welding
blanket C) Paint tape D) Masking plastic sheet - Answers B
Which of these is a condition where the vehicle favors going to one side of the road versus the other? -
Answers Pull
Technician A says that welding machine cables should be routed away from electronic sensors.
Technician B says that 12-volt batteries can release explosive gases.
Who is right? - Answers Both A and B
Technician A says that it is good practice to store removed parts of the vehicle in the back seat.
Which of these warnings is shown in the symbol below? - Answers Flammable
The reason a safety cable is used on a pulling chain is to: - Answers help reduce backlash if the chain
comes loose.
Why are a type of lineman's gloves recommended when working with high voltage parts? - Answers
They are electrically insulated.
Which of these safety items is recommended when doing the process shown in the photo below? (Using
a hammer & dolly) - Answers Safety glasses
Which of these warnings is shown in the symbol below? - Answers Poison
Which of these is a safety issue when doing the process shown in the photo below? (Spot welding) -
Answers Sparking from the welding process
Which of these safety items is missing on the technician in the photo below? (Using angle grinder) -
Answers Full-face shield
Which of these safety items is missing on the technician in the photo below? (Wiping a car down with
something) - Answers Protective gloves
Which of these sheathing colors is commonly used to designate high voltage wiring? - Answers Bright
orange
Which of these safety equipment items avoids flash burn when observing the task shown in the photo
below? (welding) - Answers Welding helmet
Technician A says that employers are allowed to remove information from an SDS for use in the work
place. Technician B says that employers should retain an SDS for 30 years after the product is no longer
used. Who is right? - Answers B only
A carcinogen is a substance that causes: - Answers cancer
Olfactory fatigue is when a person: - Answers can no longer smell a chemical after exposure.
A Class B fire extinguisher could be used on a: - Answers burning solvent.
Which of these can occur while welding on a panel that has a catalyzed clearcoat finish? - Answers
Release of isocyanate vapors
Hepatitis B is considered: - Answers a blood borne pathogen.
Information on cleaning a hazardous material spill can be found in what section of an SDS? - Answers
Accidental Release Measures
, If a container does not have a label, a technician should: - Answers avoid handling material until
identified.
Which of these should be worn when using a half- mask supplied-air respirator during refinishing? -
Answers Goggles
A flammable material: - Answers can easily catch fire and burn rapidly or explosively.
The process being shown in the photo above is: (body filler) - Answers applying body filler.
A supplement is a: - Answers change to the damage report.
Which of these damage conditions is illustrated above? (Bend in frame rail) - Answers Mash
The imaginary plane shown in red in the illustration above is used to measure: (through center of vehicle
- front to rear) - Answers width
The welded joint shown in the illustration above is: (two pieces joined together w/backing) - Answers a
butt joint with backing.
The technician in the photo above is marking: (yellow marker line on rail) - Answers the cut location on
the damaged rail.
The process being done in the photo above is: (car on lift with hanging measuring devices) - Answers
measuring a vehicle using a three-dimensional system.
The acronym R&R refers to: - Answers Remove and replace
Which of these processes is being done in the photo above? (w/round end plastic welding) - Answers
Plastic welding
What is the repair step being done by the technician in the photo above? (technician holding front
windshield) - Answers Dry setting the glass
Which of these is designed to protect the vehicle from sparks? A) plastic sheet for seats B) Welding
blanket C) Paint tape D) Masking plastic sheet - Answers B
Which of these is a condition where the vehicle favors going to one side of the road versus the other? -
Answers Pull
Technician A says that welding machine cables should be routed away from electronic sensors.
Technician B says that 12-volt batteries can release explosive gases.
Who is right? - Answers Both A and B
Technician A says that it is good practice to store removed parts of the vehicle in the back seat.
