Oil Burner License Exam
UPDATED ACTUAL Exam
Questions and CORRECT Answers
Save
Terms in this set (73)
An indirect fired Appliance
intended to supply heated air for
Air heater space Heating and other purposes
but not intended for permanent
installation
, An electrical switch designed to
prove that the proper draft has
been established by the power
Venter or burner and allows the
Air pressure burner to operate. It will de-
switch energize the burner control circuit
preventing the burner from
operating, if the power venter or
burner is not performing to
satisfaction.
A primary safety control that
causes the flow of fuel to be shut
Anti flooding off upon a rise in fuel level or upon
device receiving excess Fuel, and which
operates before the Hazardous
discharge of fuel can occur.
Appliances in which materials are
heated or melted at temperatures
Low heat not exceeding 600°F (316°C) and if
industrial not larger than 100 cu ft (2.8 m3)
Appliance not including any blower
equipment and blower
compartment.
, Appliances operating at over 50
PSIG (345 kPa) pressure when
Medium heat such Appliance is larger than 100
industrial cu ft (2.8 m3) in size. Aswell as
appliance other medium-heat appliances in
accordance with recognized good
practice.
An industrial Appliance larger than
High heat 100 cu ft (2.8 m3) in size, and other
industrial furnaces classified as high-heat
Appliance appliances in accordance with
recognized good practice.
Application A standard form issued for use in
permit/Certifica all jurisdictions throughout the
te of Commonwealth.
Completion
Unless otherwise indicated listed
Approved or approved by a nationally
recognized testing Laboratory
Authority The State Fire Marshal or his
having designee
jurisdiction
UPDATED ACTUAL Exam
Questions and CORRECT Answers
Save
Terms in this set (73)
An indirect fired Appliance
intended to supply heated air for
Air heater space Heating and other purposes
but not intended for permanent
installation
, An electrical switch designed to
prove that the proper draft has
been established by the power
Venter or burner and allows the
Air pressure burner to operate. It will de-
switch energize the burner control circuit
preventing the burner from
operating, if the power venter or
burner is not performing to
satisfaction.
A primary safety control that
causes the flow of fuel to be shut
Anti flooding off upon a rise in fuel level or upon
device receiving excess Fuel, and which
operates before the Hazardous
discharge of fuel can occur.
Appliances in which materials are
heated or melted at temperatures
Low heat not exceeding 600°F (316°C) and if
industrial not larger than 100 cu ft (2.8 m3)
Appliance not including any blower
equipment and blower
compartment.
, Appliances operating at over 50
PSIG (345 kPa) pressure when
Medium heat such Appliance is larger than 100
industrial cu ft (2.8 m3) in size. Aswell as
appliance other medium-heat appliances in
accordance with recognized good
practice.
An industrial Appliance larger than
High heat 100 cu ft (2.8 m3) in size, and other
industrial furnaces classified as high-heat
Appliance appliances in accordance with
recognized good practice.
Application A standard form issued for use in
permit/Certifica all jurisdictions throughout the
te of Commonwealth.
Completion
Unless otherwise indicated listed
Approved or approved by a nationally
recognized testing Laboratory
Authority The State Fire Marshal or his
having designee
jurisdiction
