OSHA Basic Orientation Plus Test | 2025 UPDATE Verified Questions
OSHA Basic Orientation Plus
And Answers | With 100% Correct Answers graded A+ Guaranteed
Study online at https://quizlet.com/_hh3ury
Success!!
1. What is the most frequently cited OSHA violation? Fall Protection
2. What key elements are essential to recognizing haz- Management commitment
ards and reducing or eliminating workplace hazards? and employee involvement
3. You are encouraged to ask your coworkers/supervisor True
for information whenever you have a problem or are
in doubt about what to do on a job?
4. It is your responsibility to follow all safety regulations, True
inform your employer of any unsafe condition; report
all injuries no matter how minor they seem and wear
the proper personal protective equipment?
5. The OSHA standard that addresses the requirements Process safety manage-
for preventing and lessening the results of a bad re- ment Standard
lease of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process
6. The process Hazard Analysis (PHA) is one of the most Evaluated, Controlled, and
important parts of the PSM program. PHAs are used Identified
to identify and evaluate major processes and ensure
they are
7. In the PSM standard OSHA states employees must be True
trained if they work with highly hazardous chemicals.
8. Facilities are not permitted to control your entrance False
and exit in covered process areas.
9. What should be your first concern from the moment Safety
you enter the work site?
10. True
1/5
, OSHA Basic Orientation Plus
Study online at https://quizlet.com/_hh3ury
Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason
to believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established
or understood .
11. What's needed in order to operate a plant-owned ve- qualified only authorized
hicle or mobile equipment while at a facility only
12. What type of work permits you may encounter on the safe work permits confined
job space entry permits, hot
work permits, line entry or
line breaking permits, lock-
out/tagout permits
13. if you are replacing a piece of equipment the new one Management of change
should be the same as the one being removed. If its
not you should find out whether the change was on
purpose. what is this called
14. Used only where an immediate life threatening haz- Danger
ard exists
15. Used where immediate non life threatening hazards Warning Sign
exist
16. Used to warn against potential hazards or to caution Caution signs
against unsafe practices
17. Physical devices that are designed to prevent entry Barriers
into an area where hazards are present.
18. Obstacles that discourage the passage of persons or Barricade
vehicles
2/5
OSHA Basic Orientation Plus
And Answers | With 100% Correct Answers graded A+ Guaranteed
Study online at https://quizlet.com/_hh3ury
Success!!
1. What is the most frequently cited OSHA violation? Fall Protection
2. What key elements are essential to recognizing haz- Management commitment
ards and reducing or eliminating workplace hazards? and employee involvement
3. You are encouraged to ask your coworkers/supervisor True
for information whenever you have a problem or are
in doubt about what to do on a job?
4. It is your responsibility to follow all safety regulations, True
inform your employer of any unsafe condition; report
all injuries no matter how minor they seem and wear
the proper personal protective equipment?
5. The OSHA standard that addresses the requirements Process safety manage-
for preventing and lessening the results of a bad re- ment Standard
lease of toxic, reactive, flammable, or highly explosive
hazardous chemicals from a process
6. The process Hazard Analysis (PHA) is one of the most Evaluated, Controlled, and
important parts of the PSM program. PHAs are used Identified
to identify and evaluate major processes and ensure
they are
7. In the PSM standard OSHA states employees must be True
trained if they work with highly hazardous chemicals.
8. Facilities are not permitted to control your entrance False
and exit in covered process areas.
9. What should be your first concern from the moment Safety
you enter the work site?
10. True
1/5
, OSHA Basic Orientation Plus
Study online at https://quizlet.com/_hh3ury
Under the Stop Work Authority, you have the right and
obligation to stop a work activity if you have reason
to believe your own safety or a coworkers safety is in
jeopardy or if the work plan is not clearly established
or understood .
11. What's needed in order to operate a plant-owned ve- qualified only authorized
hicle or mobile equipment while at a facility only
12. What type of work permits you may encounter on the safe work permits confined
job space entry permits, hot
work permits, line entry or
line breaking permits, lock-
out/tagout permits
13. if you are replacing a piece of equipment the new one Management of change
should be the same as the one being removed. If its
not you should find out whether the change was on
purpose. what is this called
14. Used only where an immediate life threatening haz- Danger
ard exists
15. Used where immediate non life threatening hazards Warning Sign
exist
16. Used to warn against potential hazards or to caution Caution signs
against unsafe practices
17. Physical devices that are designed to prevent entry Barriers
into an area where hazards are present.
18. Obstacles that discourage the passage of persons or Barricade
vehicles
2/5
