CLN 500 Order Transmittal
<ORDNANCE> - ANS - This display name will pull in the name of whatever was ordered to
configure the display name of the task as it will appear in the worklist.
\3 Search Methods - ANS - Patient
Local
Hybrid
\45 Maps - ANS - There are 45 Departments in the Greater Metro Service Area., and each
department has its own nurse pool. The standard ordering workflow for labs is to send a report
to the nurse pool. How many destination map records will you need to build to accommodate
this workflow need?
\5 - ANS - If Dr. Mica signs five orders for a patient during one visit, how many orders are
created?
\6 - ANS - How many different Directives are there.
\Child Order - ANS - A Single, specific, scheduled instance of an order.
\Condition Statement - ANS - Tells order transmittal what properties and values to evaluate
against the order record.
\Conditions - ANS - The If portion of the order transmittal rule. Conditions evaluate multiple
properties in an order.
\Contextual Properties - ANS - An order property based on the situational factors, mostly used
when searching for a rule or map record.
\Continue Afterwards - ANS - When the system finds a matching condition statement and
executes the directive block, order transmittal stops processing the rule - Unless the directive
block specifically tells the system to ____________________
\Continue Afterwards - ANS - Which advanced configuration tells the system to perform a
directive, but then continue searching through the rule for another condition to match?
\Create Directive - ANS - used for multistep order transmittal, when orders need additional
information before they can be completed.
\Default - ANS - A condition statement using this operator will return as true if the order does not
contain a value or if the order contains a value (any value or no value) for the property being
evaluated.
\Descriptor - ANS - The generic destination used in the rule. Allows for sharing across areas of
the organization.
\Destination Map - ANS - Translates the generic destination, descriptor pool, to the specific
destination
\Destination Workstation - ANS - Represents the specific destination in an ordering workflow
with a send directive. Will commonly have a type of pool, printer, fax, or interface.
\Device Table - ANS - An Analysis on the devices available in your hospital needs to be done
and then ALL devices should be listed on _____________?
\Directives - ANS - The Then portion of the order transmittal rule. There are Six Directives. They
tell the system what to do with the order information
, \Display Items - ANS - items that you want to appear when the user clicks on the task in the
worklist. Controlled in the OCC.
\Do Directive - ANS - executes an extension record (code) to perform such actions as updating
a color flag or adding a consulting provider to a team.
\Encounter Department - ANS - The Department/Unit where a patient is scheduled or admitted.
\End-User Defined Properties - ANS - An order property that the user can change before signing
the order. Mostly used in conditions or set directives.
\Error Pool - ANS - If ordering workflows are not accounted for in your rules, the order will reach
the end of the facility level rule which is configured to send a message to
____________________________
\Facility - ANS - Ordering workflows that are universal at your organization are put at this level
\False - ANS - T/F A single location can be linked to more than one rule.
\False - ANS - T/F: A Department can have more than one destination map linked.
\False - ANS - T/F: If the patient search method is being used, the system will first check the
workstation to see if a map is attached.
\False - ANS - T/F: The workstation number specifies what kind of destination the workstation
record represents, such as a printer, pool, interface, or computer.
\False - ANS - True or False: Pended Orders go through Order Transmittal
\False - ANS - True/False A directive block is not needed for the Parent Orders to be processed
by a rule.
\Go To - ANS - What Directive can you leverage so that you do not need to configure the same
conditions and directives across multiple rules?
\GoTo Directive - ANS - tells the system to jump into another order transmittal rule
\GoTo Rule - ANS - This rule is not linked to anything or anywhere so it can be used over and
over again.
\Hybrid - ANS - What Search Method is used in Printing in an Outpatient Clinic?
\Hybrid Search Method - ANS - determines whether to use the local or patient Hierarchy
\Is Not Null - ANS - A Condition Statement using this operator will return as true if the order
contains a value. Any Value for that property
\Is Null - ANS - A condition statement using this operator will return as true if the order does not
contain a value for the property being evaluated (No Value)
\Item Control/Status - ANS - indicates which display items should be required or recommended
in the OCC
\List - ANS - When testing rules you have 2 options. This option lists all rules linked at a
particular level. Use this to see all rules attached at a given level in the rules hierarchy.
\Local - ANS - Sends to a destination nearest the workstation from which the order was placed.
\Local - ANS - What Search Method is used in HOD, Surgical, ED Printing?
\Local Map Hierarchy - ANS - Map Hierarchy where The Focus is on the Workstation. System
consults the workstation from which the order was signed to see if a map is linked.
\Local Map Hierarchy - ANS - The Hybrid Search Method will use the _______Map Hierarchy
when the workstation department and encounter department are the same.
\Location - ANS - Used for places that have ordering workflow needs that are exceptions to
more global rules.
\LOD - ANS - Destination Descriptor
<ORDNANCE> - ANS - This display name will pull in the name of whatever was ordered to
configure the display name of the task as it will appear in the worklist.
\3 Search Methods - ANS - Patient
Local
Hybrid
\45 Maps - ANS - There are 45 Departments in the Greater Metro Service Area., and each
department has its own nurse pool. The standard ordering workflow for labs is to send a report
to the nurse pool. How many destination map records will you need to build to accommodate
this workflow need?
\5 - ANS - If Dr. Mica signs five orders for a patient during one visit, how many orders are
created?
\6 - ANS - How many different Directives are there.
\Child Order - ANS - A Single, specific, scheduled instance of an order.
\Condition Statement - ANS - Tells order transmittal what properties and values to evaluate
against the order record.
\Conditions - ANS - The If portion of the order transmittal rule. Conditions evaluate multiple
properties in an order.
\Contextual Properties - ANS - An order property based on the situational factors, mostly used
when searching for a rule or map record.
\Continue Afterwards - ANS - When the system finds a matching condition statement and
executes the directive block, order transmittal stops processing the rule - Unless the directive
block specifically tells the system to ____________________
\Continue Afterwards - ANS - Which advanced configuration tells the system to perform a
directive, but then continue searching through the rule for another condition to match?
\Create Directive - ANS - used for multistep order transmittal, when orders need additional
information before they can be completed.
\Default - ANS - A condition statement using this operator will return as true if the order does not
contain a value or if the order contains a value (any value or no value) for the property being
evaluated.
\Descriptor - ANS - The generic destination used in the rule. Allows for sharing across areas of
the organization.
\Destination Map - ANS - Translates the generic destination, descriptor pool, to the specific
destination
\Destination Workstation - ANS - Represents the specific destination in an ordering workflow
with a send directive. Will commonly have a type of pool, printer, fax, or interface.
\Device Table - ANS - An Analysis on the devices available in your hospital needs to be done
and then ALL devices should be listed on _____________?
\Directives - ANS - The Then portion of the order transmittal rule. There are Six Directives. They
tell the system what to do with the order information
, \Display Items - ANS - items that you want to appear when the user clicks on the task in the
worklist. Controlled in the OCC.
\Do Directive - ANS - executes an extension record (code) to perform such actions as updating
a color flag or adding a consulting provider to a team.
\Encounter Department - ANS - The Department/Unit where a patient is scheduled or admitted.
\End-User Defined Properties - ANS - An order property that the user can change before signing
the order. Mostly used in conditions or set directives.
\Error Pool - ANS - If ordering workflows are not accounted for in your rules, the order will reach
the end of the facility level rule which is configured to send a message to
____________________________
\Facility - ANS - Ordering workflows that are universal at your organization are put at this level
\False - ANS - T/F A single location can be linked to more than one rule.
\False - ANS - T/F: A Department can have more than one destination map linked.
\False - ANS - T/F: If the patient search method is being used, the system will first check the
workstation to see if a map is attached.
\False - ANS - T/F: The workstation number specifies what kind of destination the workstation
record represents, such as a printer, pool, interface, or computer.
\False - ANS - True or False: Pended Orders go through Order Transmittal
\False - ANS - True/False A directive block is not needed for the Parent Orders to be processed
by a rule.
\Go To - ANS - What Directive can you leverage so that you do not need to configure the same
conditions and directives across multiple rules?
\GoTo Directive - ANS - tells the system to jump into another order transmittal rule
\GoTo Rule - ANS - This rule is not linked to anything or anywhere so it can be used over and
over again.
\Hybrid - ANS - What Search Method is used in Printing in an Outpatient Clinic?
\Hybrid Search Method - ANS - determines whether to use the local or patient Hierarchy
\Is Not Null - ANS - A Condition Statement using this operator will return as true if the order
contains a value. Any Value for that property
\Is Null - ANS - A condition statement using this operator will return as true if the order does not
contain a value for the property being evaluated (No Value)
\Item Control/Status - ANS - indicates which display items should be required or recommended
in the OCC
\List - ANS - When testing rules you have 2 options. This option lists all rules linked at a
particular level. Use this to see all rules attached at a given level in the rules hierarchy.
\Local - ANS - Sends to a destination nearest the workstation from which the order was placed.
\Local - ANS - What Search Method is used in HOD, Surgical, ED Printing?
\Local Map Hierarchy - ANS - Map Hierarchy where The Focus is on the Workstation. System
consults the workstation from which the order was signed to see if a map is linked.
\Local Map Hierarchy - ANS - The Hybrid Search Method will use the _______Map Hierarchy
when the workstation department and encounter department are the same.
\Location - ANS - Used for places that have ordering workflow needs that are exceptions to
more global rules.
\LOD - ANS - Destination Descriptor
