MA Oil Burners Test Questions With Accurate Answers.
. An indirect-fired appliance intended to supply heated air for space heating
and other purposes, but not intended for permanent installation. - accurate
answers-Air Heater.
An electrical switch designed to prove that the proper draft has been
established by the power venter or burner and allows the burner to operate. If
the power venter or burner is not performing so as to satisfy the operating
requirements of the equipment for safe performance, the switch will de-
energize the burner control circuit preventing the burner from operating. -
accurate answers-Air pressure switch .
. A primary safety control that causes the flow of fuel to be shut off upon a rise
in fuel level or upon receiving excess fuel, and which operates before the
hazardous discharge of fuel can occur - accurate answers-Anti-flooding Device
(a) Low-Heat Industrial Appliance. An industrial appliance such as a
commercial cooking range, pressing machine boiler at any pressure, bake
oven, candy furnace, stereotype furnace, drying and curing appliance, and
other process appliances in which materials are heated or melted at
temperatures (excluding flue-gas temperatures) not exceeding 600°F (316°C).
Appliances otherwise classed as medium-heat appliances may be considered
as low-heat appliances if not larger than 100 cubic feet (2.8 m 3 ) in size
excluding any burner equipment and blower compartment - accurate
answers-Appliances; industrial
(b) An industrial appliance such as an annealing furnace (glass or metal),
charcoal furnace, galvanizing furnace, gas producer, commercial or industrial
incinerator, and steam boiler operating at over 50 psig (345 kPa) pressure
when such appliance is larger than 100 cubic feet (2.8 m 3 ) in size, and other
furnaces classified as medium-heat appliances in accordance with recognized
good practice - accurate answers-(b) Medium-Heat Industrial Appliance
c. An industrial appliance such as billet and bloom furnace, blast furnace,
brass melter, cupola, glass furnace, open-hearth furnace, and ceramic kiln and
vitreous enamelizing oven (ferrous metals) when such appliances are larger
than 100 cubic feet (2.8 m 3 ) in size, and other furnaces classified as high-
, heat appliances in accordance with recognized good practice - accurate
answers-c) High-Heat Industrial Appliance.
A standard form issued for use in all jurisdictions
throughout the Commonwealth - accurate answers-Application
Permit/Certificate of Completion.
. Unless otherwise indicated, listed or approved by a nationally recognized
testing
laboratory - accurate answers-Approved
. The state fire marshal or his designee - accurate answers-Authority Having
Jurisdiction.
. A closed vessel in which water is heated, steam is generated, steam is
superheated, or any combination thereof, by the application of heat from
combustible fuels in a self-contained or attached furnace. - accurate answers-
Boiler.
. A boiler for generating steam at pressures in excess of 15 psi (103 kPa), or
for heating water to a temperature in excess of 250°F (121°C) or at a pressure
in excess of 160 psi (1103 kPa). - accurate answers-Boiler, High Pressure).
A low-pressure hot water boiler having a volume exceeding 120 gallons (454
L), or a heat input exceeding 200,000 Btu per hour (58.6 kw) or an operating
temperature exceeding 200°F (93°C) that provides hot water to be used
externally to itself. - accurate answers-Boiler, Hot Water Supply.
A boiler for generating steam at pressures not in excess of 15 psig (103 kPa)
or for furnishing water at a temperature not in excess of 250°F (121°C) at
pressures not in excess of 160 psig (1103 kPa). - accurate answers-Boiler, Low
Pressure
A burner equipped so that main burner fuel may be turned on and
ignited automatically - accurate answers-Burner, Automatically Ignited
. An indirect-fired appliance intended to supply heated air for space heating
and other purposes, but not intended for permanent installation. - accurate
answers-Air Heater.
An electrical switch designed to prove that the proper draft has been
established by the power venter or burner and allows the burner to operate. If
the power venter or burner is not performing so as to satisfy the operating
requirements of the equipment for safe performance, the switch will de-
energize the burner control circuit preventing the burner from operating. -
accurate answers-Air pressure switch .
. A primary safety control that causes the flow of fuel to be shut off upon a rise
in fuel level or upon receiving excess fuel, and which operates before the
hazardous discharge of fuel can occur - accurate answers-Anti-flooding Device
(a) Low-Heat Industrial Appliance. An industrial appliance such as a
commercial cooking range, pressing machine boiler at any pressure, bake
oven, candy furnace, stereotype furnace, drying and curing appliance, and
other process appliances in which materials are heated or melted at
temperatures (excluding flue-gas temperatures) not exceeding 600°F (316°C).
Appliances otherwise classed as medium-heat appliances may be considered
as low-heat appliances if not larger than 100 cubic feet (2.8 m 3 ) in size
excluding any burner equipment and blower compartment - accurate
answers-Appliances; industrial
(b) An industrial appliance such as an annealing furnace (glass or metal),
charcoal furnace, galvanizing furnace, gas producer, commercial or industrial
incinerator, and steam boiler operating at over 50 psig (345 kPa) pressure
when such appliance is larger than 100 cubic feet (2.8 m 3 ) in size, and other
furnaces classified as medium-heat appliances in accordance with recognized
good practice - accurate answers-(b) Medium-Heat Industrial Appliance
c. An industrial appliance such as billet and bloom furnace, blast furnace,
brass melter, cupola, glass furnace, open-hearth furnace, and ceramic kiln and
vitreous enamelizing oven (ferrous metals) when such appliances are larger
than 100 cubic feet (2.8 m 3 ) in size, and other furnaces classified as high-
, heat appliances in accordance with recognized good practice - accurate
answers-c) High-Heat Industrial Appliance.
A standard form issued for use in all jurisdictions
throughout the Commonwealth - accurate answers-Application
Permit/Certificate of Completion.
. Unless otherwise indicated, listed or approved by a nationally recognized
testing
laboratory - accurate answers-Approved
. The state fire marshal or his designee - accurate answers-Authority Having
Jurisdiction.
. A closed vessel in which water is heated, steam is generated, steam is
superheated, or any combination thereof, by the application of heat from
combustible fuels in a self-contained or attached furnace. - accurate answers-
Boiler.
. A boiler for generating steam at pressures in excess of 15 psi (103 kPa), or
for heating water to a temperature in excess of 250°F (121°C) or at a pressure
in excess of 160 psi (1103 kPa). - accurate answers-Boiler, High Pressure).
A low-pressure hot water boiler having a volume exceeding 120 gallons (454
L), or a heat input exceeding 200,000 Btu per hour (58.6 kw) or an operating
temperature exceeding 200°F (93°C) that provides hot water to be used
externally to itself. - accurate answers-Boiler, Hot Water Supply.
A boiler for generating steam at pressures not in excess of 15 psig (103 kPa)
or for furnishing water at a temperature not in excess of 250°F (121°C) at
pressures not in excess of 160 psig (1103 kPa). - accurate answers-Boiler, Low
Pressure
A burner equipped so that main burner fuel may be turned on and
ignited automatically - accurate answers-Burner, Automatically Ignited
