INDUSTRIAL TECHNOLOGY HSC- WOODWORKING
TERMS TEST ANSWERED #18
Ripping - correct answer Cutting a board with the grain from end to end to reduce the
width.
Cross Cutting - correct answer Cutting a board across the grain from edge to edge to
reduce length.
Plywood - correct answer A board made of several layers of wood.
Solid Stock - correct answer A board that is one single solid type of wood
Thickness - correct answer the distance between the faces of the board.
Latex - correct answer Paint, stains or finishes that can be cleaned up with soap and
water.
Face - correct answer The two largest surfaces of a board that go with the grain.
Ends - correct answer The two smaller surfaces of a board that go perpendicular with
the grain.
Pattern/Template - correct answer An exact copy of a project to be traced and used as
a guide.
Kerf - correct answer The split or space made by the blade of any hand or power tool or
machine.
Oil Based - correct answer Paint, stains or finishes that must be cleaned up with a
solvent such as paint thinner, mineral turps, etc. All solvents and cleaning materials
must be disposed of properly.
Finishing - correct answer The application of stains and clear finishes to enhance and
protect
Width - correct answer The distance between the edges of a board.
Length - correct answer The distance between the ends of the board.
Edges - correct answer The two smaller surfaces of a board that go with the grain
Squaring up a board - correct answer The procedure to get a board to its finished size
with all its adjoining surfaces perpendicular(90) to each other.
TERMS TEST ANSWERED #18
Ripping - correct answer Cutting a board with the grain from end to end to reduce the
width.
Cross Cutting - correct answer Cutting a board across the grain from edge to edge to
reduce length.
Plywood - correct answer A board made of several layers of wood.
Solid Stock - correct answer A board that is one single solid type of wood
Thickness - correct answer the distance between the faces of the board.
Latex - correct answer Paint, stains or finishes that can be cleaned up with soap and
water.
Face - correct answer The two largest surfaces of a board that go with the grain.
Ends - correct answer The two smaller surfaces of a board that go perpendicular with
the grain.
Pattern/Template - correct answer An exact copy of a project to be traced and used as
a guide.
Kerf - correct answer The split or space made by the blade of any hand or power tool or
machine.
Oil Based - correct answer Paint, stains or finishes that must be cleaned up with a
solvent such as paint thinner, mineral turps, etc. All solvents and cleaning materials
must be disposed of properly.
Finishing - correct answer The application of stains and clear finishes to enhance and
protect
Width - correct answer The distance between the edges of a board.
Length - correct answer The distance between the ends of the board.
Edges - correct answer The two smaller surfaces of a board that go with the grain
Squaring up a board - correct answer The procedure to get a board to its finished size
with all its adjoining surfaces perpendicular(90) to each other.
