OSHA 510 Study Review Practice Exam 2025

General Duty Clause Section 5(a)(1) - -Employees shall have a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees. Osha was not allowed to use? - -State Level standards. Osha is a part of the? - -Department of Labor The 4 types of OSHA Standards by Industry are... - - 1.)General Industry 2.)Construction 29 CFR 1926 3.)Maritime 4.)Agriculture The 2 types of Application of Standards are - -1.)Horizontal- apply to all industry. 2.)Vertical- apply to a specific industry or type of equipment. OSHA Directives - -are used to ensure consistent enforcement of osha regulations What are the 4 Inspection Priorities - -1.)Imminent Danger 2.)Fatalities and Catastrophes 3.)Employee Complaints/Referrals 4.)Programmed High-Hazard Inspections What is the first thing they will do in the inspection process? - -Compliance officer displays official credentials. Types of Violations - -1.)De Minimus 2.)Other than serious 3.)Serious 4.)Willfull 5.)Repeated 6.)Failure to abate 7.)Regulatory 8.)Other Appeals by Employers. Employers may contest either citation, abatement period, or proposed penalty within... - -15 working days of receipt through written "Notice of Contest" OSHA 510 OSHA 510 OSHA 510 Under the Multi-Employer Citation Policy, Which category is usually the one cited for safety violation? - -Exposing Employer What are the three record keeping forms? - -1.)OSHA Form 300 2.)OSHA Form 301 3.)OSHA Form 300A OSHA Form 300 is a - -Log of work-related injuries and illnesses. OSHA Form 301 - -Injury and illness incident repot. OSHA 300A is just a - -Summary of work-related injuries and illnesses. What are some of the safety and health payoffs - -1.)Reduced absenteeism 2.)Lower turnover 3.)Higher productivity 4.)Improved employee morale 1926.20(b)(1) states that it shall be the responsibility of the... - -employer to initiate and maintain such programs as may be necessary to comply with (1926). 1926.20(b)(2) states that such programs shall... - -provide for frequent and regular inspections of the job sites, material, and equipment made by a competent person. What is the Accident Prevention Responsibility - -The responsibility of employer to initiate and maintain programs necessary to comply with CFR Part 1926 Construction Industry What are the two main components of Accident Prevention Responsibility? - -1.)A safety and health program 2.)Jobsite inspections by a competent person Define a Competent Person - -Has the authorization to take corrective action and is able to recognize existing and predictable hazards Define an Authorized Person - -A person assigned by the employer to perform a duty or to be a particular job site. Qualified means one who, by possession of a: - -1.)Recognized degree 2.)Certificate 3.)Professional standing 4.)who by extensive knowledge, training, and experience can resolve the problem What other government organization is concerned about the transporting of compressed gas cylinders? - -Department of Transportation (DOT) OSHA 510 When storing compressed gas cylinders how far apart do the have to be? - -20ft For all in plant handling, storage, and utilization of all compressed gas requires what? - Compressed Gas Association Pamphlet P-1-1965 Second rule to safely store gas cylinders - -a firewall 5 feet high with a fire rating of 1/2 hr. When arch welding or cutting a minimum of _________ from the electrode cable end must be kept free of splice. - -10 ft In construction when there is an unprotected edge 6 feet or more above lower level it shall be protected by either - -a guardrail system, safety net system, or personal fall arrest system. The three components of a guardrail system are? - - 1.)top rail 2.)mid-rail 3.)and a toeboard The top rail height for a guardrail system is? - -42" (plus or minus 3") Toeboard measures a minimum of _________ high - -3