DEX IOT DAY 2 TEST 2025| ( QUESTIONS AND WELL DETAILED ANSWERS)| 2 DIFFERENT EXAMS | GRADED A+ | LATEST UPDATE 2025/2026

DEX IOT DAY 2 TEST 2025| ( QUESTIONS AND WELL
DETAILED ANSWERS)| 2 DIFFERENT EXAMS |
GRADED A+ | LATEST UPDATE 2025/2026
What suture is the Tightrope XP Drill loaded with? -CORRECT ANSWER #5 UHMWPE


What is special about the Tightrope XP Drill? -CORRECT ANSWER Designed to
prevent skiving off the fibula ridge.


What does UHMWPE stand for? -CORRECT ANSWER Ultra High Molecular Weight
Polyethylene

What is the transmalleolar plane? -CORRECT ANSWER A plane that is 30 degrees
anterior to the coronal plane.

What should be done before drilling for the XP tightrope -CORRECT ANSWER Stabilize
all fractures first.

Where should the drilling for the tightrope xp start? -CORRECT ANSWER About 1.5 cm
above the joint line.

What is the size of the drill bit for the tightrope xp? -CORRECT ANSWER 3.7.

How should the black knob on the tightrope xp be positioned during passing? -
CORRECT ANSWER Either towards the foot or towards the head. Towards the foot is
slightly better.

Why is positioning the black knob for the tightrope xp towards the foot slightly better? -
CORRECT ANSWER The passer tip is at a 45 degree angle. When the button is
towards the foot the 45 degree angle lines up with the tibia and allows the button to flip
without pushing out into the soft tissues as much

How is the tightrope XP tensioned? -CORRECT ANSWER Hold the center of the
sutures and walk the button down to the plate or nail before starting to tension to stop
the suture from bunching

What plates come in the Ankle Fracture system? -CORRECT ANSWER Locking distal
fibula plates, Locking third tubular, Locking Straight, Medial Hook Plate, Locking Lateral
Hook Plate

What are the features of the Locking distal fibula plates? -CORRECT ANSWER Only
plate with suture holes that can be used for the AiTFL.

, What sizes of screws can be used in the head of the locking distal fibular plates? -
CORRECT ANSWER 2.7 locking/cortical and 3.0 cancellous.

How many hole options in the distal fibular plate can be used for the syndesmosis
tightrope? -CORRECT ANSWER 3.

What sizes of screws can be used in the shaft of the distal fibular plate? -CORRECT
ANSWER 3.5 screws or 4.0 cancellous.

What are the available sizes for the distal fibular plate? -CORRECT ANSWER 4, 5, 6, 8,
10, 12, 14.

What is the purpose of the tapered distal end of the distal fibular plate? -CORRECT
ANSWER To limit soft tissue irritation.

What type of screws can be used with the locking third tubular plate? -CORRECT
ANSWER 3.5 screws or 4.0 cancellous.

What are the benefits of the recessed holes and scalloped edge of the third tubular
plate? -CORRECT ANSWER They reduce screw prominence and profile, and facilitate
contouring.

What is the thickness of the locking third tubular plate? -CORRECT ANSWER 1.2 mm.

Which holes in the third tubular plate can be used for syndesmosis. -CORRECT
ANSWER All

What are the available hole options for the locking straight plate? -CORRECT ANSWER
4, 6, 7, 8, 10, 12.

What times of fractures are third tubular plates usually used for -CORRECT ANSWER
Distal fibular fractures

What type of screws can be used with the locking straight plate? -CORRECT ANSWER
3.5 screws and 4.0 cancellous.

How is the locking straight plate different than the third tubular plate? -CORRECT
ANSWER It is made thicker so it can be used for shaft fractures

Can the locking straight plate accommodate syndesmosis tightrope? -CORRECT
ANSWER Yes, all holes are designed for it.

Sizes for Locking Straight Plate -CORRECT ANSWER 4,6,7,8,10,12 hole