INDUSTRIAL MAINTENANCE EXAM
2025 QUESTIONS AND ANSWERS
A gate valve offer is very little resistance to flow went open, so it produces very little _______ -
ANS Pressure drop
Gate valve should not be used to ______ - ANS Throttle flow
Enough gate valve is likely to be used in which of the following applications - ANS Slurry or
waste
Which of the following valves is a rotary action valve? - ANS Ball
Which of the following valves is easily adapted to multiport construction - ANS Plug
One disadvantage of the globe valve is - ANS High head loss
If the taper of the plug goes from wide to narrow from top to bottom, the plug must travel -
ANS Down to close , up to open
I needle valve maybe use with an application requires - ANS Fine adjustment of flow
Relief valves are normally used in liquid services - ANS True
COPYRIGHT © 2025 BRAINBARTER ALL RIGHTS RESERVED 1
, A swing check valve requires a counter white if used in a ________ application - ANS Vertical
Butterfly valves use _____ operators to transmit power of right angles - ANS Worm-gear
The failsafe position for any Automatically actuated valve is closed position - ANS True
When choosing one valves the blank Valve exhibits the largest pressure drop - ANS Globe
If I gave valve has a flow indicated on it, it Is because the gate valve has a - ANS Double gate
Fittings that are marked capital LH on the outside wall indicate - ANS Left-handed threads
Mixing rigging hardware of different lifting capacity is OK, as long as the capacity of One of the
hardware items to see the weight of the load - ANS False
Be safe working load of a rigging hook is accurate only when the load is suspended from the
_______ of the hook - ANS Saddle
OSHA requires that a Hook be replaced if the throat has open _________ percent or more from
its original size - ANS 15%
I hope that his point loaded can carry about ____ percent of the rated load - ANS 40%
Slings are attached together using ______. - ANS shackles
All of the following are true except - ANS The size of the shackle is determined by its pin size
COPYRIGHT © 2025 BRAINBARTER ALL RIGHTS RESERVED 2
2025 QUESTIONS AND ANSWERS
A gate valve offer is very little resistance to flow went open, so it produces very little _______ -
ANS Pressure drop
Gate valve should not be used to ______ - ANS Throttle flow
Enough gate valve is likely to be used in which of the following applications - ANS Slurry or
waste
Which of the following valves is a rotary action valve? - ANS Ball
Which of the following valves is easily adapted to multiport construction - ANS Plug
One disadvantage of the globe valve is - ANS High head loss
If the taper of the plug goes from wide to narrow from top to bottom, the plug must travel -
ANS Down to close , up to open
I needle valve maybe use with an application requires - ANS Fine adjustment of flow
Relief valves are normally used in liquid services - ANS True
COPYRIGHT © 2025 BRAINBARTER ALL RIGHTS RESERVED 1
, A swing check valve requires a counter white if used in a ________ application - ANS Vertical
Butterfly valves use _____ operators to transmit power of right angles - ANS Worm-gear
The failsafe position for any Automatically actuated valve is closed position - ANS True
When choosing one valves the blank Valve exhibits the largest pressure drop - ANS Globe
If I gave valve has a flow indicated on it, it Is because the gate valve has a - ANS Double gate
Fittings that are marked capital LH on the outside wall indicate - ANS Left-handed threads
Mixing rigging hardware of different lifting capacity is OK, as long as the capacity of One of the
hardware items to see the weight of the load - ANS False
Be safe working load of a rigging hook is accurate only when the load is suspended from the
_______ of the hook - ANS Saddle
OSHA requires that a Hook be replaced if the throat has open _________ percent or more from
its original size - ANS 15%
I hope that his point loaded can carry about ____ percent of the rated load - ANS 40%
Slings are attached together using ______. - ANS shackles
All of the following are true except - ANS The size of the shackle is determined by its pin size
COPYRIGHT © 2025 BRAINBARTER ALL RIGHTS RESERVED 2
