CyberDefense Analysis
Based on your review of physical security, you have recommended several improvements. Your plan
includes smart card readers, IP cameras, signs, and access logs.
Implement your physical security plan by dragging the correct items from the shelf into the various
locations in the building. As you drag the items from the shelf, the possible drop locations are
highlighted.
In this lab, your task is to:
Install the smart card key readers in the appropriate locations to control access to key infrastructure.
Install the IP security cameras in the appropriate locations to record which employees access the key
infrastructure.
Install a Restricted Access sign in the appropriate location to control access to the key infrastructure.
Add the visitor log to a location appropriate for logging visitor access. - ANS>>> 1. Install the smart card
key readers.
A. From the Shelf, expand Door Locks.
B. Drag a Smart Card Reader from the shelf to the highlighted location outside the building's front door.
C. Drag a Smart Card Reader from the shelf to the highlighted location outside the Networking Closet's
door.
2. Install the IP security cameras.
A. From the Shelf, expand CCTV Cameras.
B. Drag the IP Security Camera from the shelf to the highlighted circle inside the Networking Closet.
C.Drag the IP Security Camera from the shelf to just outside the Networking Closet.
3. Install the Restricted Access sign.
A.From the Shelf, expand Restricted Access Signs.
B. Drag the Restricted Access Sign from the shelf to the Networking Closet door.
4. Install the visitor log.
,A. On the Shelf, expand Visitor Logs.
B. Drag the Visitor Log from the shelf to the Lobby desk.
You are the security analyst for a small corporate network. You want to make sure that guests visiting
your company have limited access to the internet. You have chosen to use pfSense's captive portal
feature. Guests must pass through this portal to access the internet.
In this lab, your task is to:
Access the pfSense management console:Username: adminPassword: P@ssw0rd (zero)
Add a captive portal zone named WiFi-Guest.Use the description Guest wireless access zone
Using the GuestWi-Fi interface, configure your portal as follows:Allow a maximum of 50 concurrent
connections.Disconnect user from the internet if their connection is inactive for 15 minutes.Disconnect
user from the internet after 45 minutes regardless of their activity.Limit users' downloads and uploads
to 7000 and 2400 Kbit/s, respectively.Force to pass through your portal prior to authentication.
Allow the following MAC and IP address to pass through th - ANS>>> Complete this lab as follows:
Sign into the pfSense management console.
In the Username field, enter admin.
In the Password field, enter P@ssw0rd (zero).
Select SIGN IN or press Enter.
Add a captive portal zone.From the pfSense menu bar, select Services > Captive Portal.
Select Add.
For Zone name, enter WiFi-Guest.
For Zone description, enter Guest wireless access zone.
Select Save & Continue.
, Enable and configure the captive portal.
Under Captive Portal Configuration, select Enable.
For Interfaces, select GuestWi-Fi.
For Maximum concurrent connections, select 50.
For Idle timeout, enter 15.
For Hard timeout, enter 45.
Scroll down and select Per-user bandwidth restriction.
For Default download (Kbit/s), enter 7000.For Default upload (Kbit/s), enter 2400.
Under Authentication, use the drop-down menu to select None, don't authenticate users.
Scroll to the bottom and select Save.
Allow a MAC address to pass through the portal.
From the Captive Portal page, select the Edit Zone icon (pencil).
Under the Services breadcrumb, select MACs.Select Add.Make sure the Action field is set to Pass.For
Mac Address, enter 00:00:1C:11:22:33.Select Save.
Allow an IP address to pass through the portal.
Under the Services breadcrumb, select Allowed IP Addresses.
Based on your review of physical security, you have recommended several improvements. Your plan
includes smart card readers, IP cameras, signs, and access logs.
Implement your physical security plan by dragging the correct items from the shelf into the various
locations in the building. As you drag the items from the shelf, the possible drop locations are
highlighted.
In this lab, your task is to:
Install the smart card key readers in the appropriate locations to control access to key infrastructure.
Install the IP security cameras in the appropriate locations to record which employees access the key
infrastructure.
Install a Restricted Access sign in the appropriate location to control access to the key infrastructure.
Add the visitor log to a location appropriate for logging visitor access. - ANS>>> 1. Install the smart card
key readers.
A. From the Shelf, expand Door Locks.
B. Drag a Smart Card Reader from the shelf to the highlighted location outside the building's front door.
C. Drag a Smart Card Reader from the shelf to the highlighted location outside the Networking Closet's
door.
2. Install the IP security cameras.
A. From the Shelf, expand CCTV Cameras.
B. Drag the IP Security Camera from the shelf to the highlighted circle inside the Networking Closet.
C.Drag the IP Security Camera from the shelf to just outside the Networking Closet.
3. Install the Restricted Access sign.
A.From the Shelf, expand Restricted Access Signs.
B. Drag the Restricted Access Sign from the shelf to the Networking Closet door.
4. Install the visitor log.
,A. On the Shelf, expand Visitor Logs.
B. Drag the Visitor Log from the shelf to the Lobby desk.
You are the security analyst for a small corporate network. You want to make sure that guests visiting
your company have limited access to the internet. You have chosen to use pfSense's captive portal
feature. Guests must pass through this portal to access the internet.
In this lab, your task is to:
Access the pfSense management console:Username: adminPassword: P@ssw0rd (zero)
Add a captive portal zone named WiFi-Guest.Use the description Guest wireless access zone
Using the GuestWi-Fi interface, configure your portal as follows:Allow a maximum of 50 concurrent
connections.Disconnect user from the internet if their connection is inactive for 15 minutes.Disconnect
user from the internet after 45 minutes regardless of their activity.Limit users' downloads and uploads
to 7000 and 2400 Kbit/s, respectively.Force to pass through your portal prior to authentication.
Allow the following MAC and IP address to pass through th - ANS>>> Complete this lab as follows:
Sign into the pfSense management console.
In the Username field, enter admin.
In the Password field, enter P@ssw0rd (zero).
Select SIGN IN or press Enter.
Add a captive portal zone.From the pfSense menu bar, select Services > Captive Portal.
Select Add.
For Zone name, enter WiFi-Guest.
For Zone description, enter Guest wireless access zone.
Select Save & Continue.
, Enable and configure the captive portal.
Under Captive Portal Configuration, select Enable.
For Interfaces, select GuestWi-Fi.
For Maximum concurrent connections, select 50.
For Idle timeout, enter 15.
For Hard timeout, enter 45.
Scroll down and select Per-user bandwidth restriction.
For Default download (Kbit/s), enter 7000.For Default upload (Kbit/s), enter 2400.
Under Authentication, use the drop-down menu to select None, don't authenticate users.
Scroll to the bottom and select Save.
Allow a MAC address to pass through the portal.
From the Captive Portal page, select the Edit Zone icon (pencil).
Under the Services breadcrumb, select MACs.Select Add.Make sure the Action field is set to Pass.For
Mac Address, enter 00:00:1C:11:22:33.Select Save.
Allow an IP address to pass through the portal.
Under the Services breadcrumb, select Allowed IP Addresses.
