1 | Page
NCCER STUDY GUIDE MODULE 1 BASIC
SAFETY 2025 UPDATED ACTUAL EXAM WITH
CORRECT SOLUTIONS.
Companies with strong safety cultures usually have lower _ . -
correct answer- turnover
Safety is a learned behavior and attitude. T/F - correct answer-
TRUE
Poor lighting, excessive noise, inadequate guards for moving
parts are examples of _ _. - correct answer- unsafe conditions
The activity that consists of breaking a job into its component
task and then analyzing each step for potential hazards is
called _ _ _ . - correct answer- job safety analysis
The measure of probability, consequences, and exposure
related to an event is referred to as _ . - correct answer- Risk
, 2 | Page
If there is a hole in the floor of a structure, the preferred method
of protecting workers from falls is to _ _ _ _ _ _ _ . - correct
answer- cover the opening and label the cover
The D-ring or support point on a safety harness should be
placed _ _ _ _ _ _ . - correct answer- in the middle of the back
A personal fall arrest system should be inspected monthly by a
_ _ . - correct answer- competent person
Lanyards that have no shock-absorbing features are used for _
. - correct answer- positioning
When placing a ladder against a platform or roof, the top of the
ladder should extend above the point where the ladder touches
the platform or roof by at least _ _ _ . - correct answer- 3 feet
(91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _
must be applied as protective measures to prevent objects from
falling and striking a person below. - correct answer-
Toeboards, debris nets, canopies
NCCER STUDY GUIDE MODULE 1 BASIC
SAFETY 2025 UPDATED ACTUAL EXAM WITH
CORRECT SOLUTIONS.
Companies with strong safety cultures usually have lower _ . -
correct answer- turnover
Safety is a learned behavior and attitude. T/F - correct answer-
TRUE
Poor lighting, excessive noise, inadequate guards for moving
parts are examples of _ _. - correct answer- unsafe conditions
The activity that consists of breaking a job into its component
task and then analyzing each step for potential hazards is
called _ _ _ . - correct answer- job safety analysis
The measure of probability, consequences, and exposure
related to an event is referred to as _ . - correct answer- Risk
, 2 | Page
If there is a hole in the floor of a structure, the preferred method
of protecting workers from falls is to _ _ _ _ _ _ _ . - correct
answer- cover the opening and label the cover
The D-ring or support point on a safety harness should be
placed _ _ _ _ _ _ . - correct answer- in the middle of the back
A personal fall arrest system should be inspected monthly by a
_ _ . - correct answer- competent person
Lanyards that have no shock-absorbing features are used for _
. - correct answer- positioning
When placing a ladder against a platform or roof, the top of the
ladder should extend above the point where the ladder touches
the platform or roof by at least _ _ _ . - correct answer- 3 feet
(91 cm)
When performing overhead work on scaffolding, _ , _ _ , or _
must be applied as protective measures to prevent objects from
falling and striking a person below. - correct answer-
Toeboards, debris nets, canopies
