ACCURACY IS GUARANTEED
AWS-CWI Part B Test 6 Questions with Detailed
Verified Answers for Accuracy
Quiz: The length of a fillet weld is the
_______________________.⼀Answer: Overall length of
the full size fillet.
Quiz: The incomplete filling of the weld root is called
__________________.⼀Answer: Inadequate penetration.
Quiz: To zero out the dial caliper, you have to perform what
function?⼀Answer: Close the jaws or contact points to no
opening.
Locate the notch in the face plate and rotate it until the needle
comes to zero.
Quiz: Edges of members not subject to calculated stresses
shall have no gouges deeper than⼀Answer: 1/8"
Quiz: Weld crown in pipeline applications may also be
referred to as:⼀Answer: Weld reinforcement
, ACCURACY IS GUARANTEED
Quiz: What is the acceptable amount of misalignment (hi-
low) for pressure piping?⼀Answer: 0.0625" or 1/16"
Quiz: What is the abbreviation for nondestructive testing?⼀
Answer: NDT
Quiz: What formula would you use to convert pounds per
square inch to Megapascals?⼀Answer: PSI X 0.00689 = MPa
Quiz: CVN (Charpy V Notch) testing shall conform to
_______________.⼀Answer: AWS B4.0
Quiz: What is the abbreviation for complete joint
penetration?⼀Answer: CJP
Quiz: Upon visual examination, there shall be
___________________.⼀Answer: No evidence of cracks
Quiz: For pipeline applications, any grinding or welding on a
completed weld to correct an individual defect or accumulation
of defects in the weld that has been rejected by visual or
nondestructive testing is called a ___________________.⼀
Answer: Repair
AWS-CWI Part B Test 6 Questions with Detailed
Verified Answers for Accuracy
Quiz: The length of a fillet weld is the
_______________________.⼀Answer: Overall length of
the full size fillet.
Quiz: The incomplete filling of the weld root is called
__________________.⼀Answer: Inadequate penetration.
Quiz: To zero out the dial caliper, you have to perform what
function?⼀Answer: Close the jaws or contact points to no
opening.
Locate the notch in the face plate and rotate it until the needle
comes to zero.
Quiz: Edges of members not subject to calculated stresses
shall have no gouges deeper than⼀Answer: 1/8"
Quiz: Weld crown in pipeline applications may also be
referred to as:⼀Answer: Weld reinforcement
, ACCURACY IS GUARANTEED
Quiz: What is the acceptable amount of misalignment (hi-
low) for pressure piping?⼀Answer: 0.0625" or 1/16"
Quiz: What is the abbreviation for nondestructive testing?⼀
Answer: NDT
Quiz: What formula would you use to convert pounds per
square inch to Megapascals?⼀Answer: PSI X 0.00689 = MPa
Quiz: CVN (Charpy V Notch) testing shall conform to
_______________.⼀Answer: AWS B4.0
Quiz: What is the abbreviation for complete joint
penetration?⼀Answer: CJP
Quiz: Upon visual examination, there shall be
___________________.⼀Answer: No evidence of cracks
Quiz: For pipeline applications, any grinding or welding on a
completed weld to correct an individual defect or accumulation
of defects in the weld that has been rejected by visual or
nondestructive testing is called a ___________________.⼀
Answer: Repair
