Breath Testing Quiz UPDATED ACTUAL
Exam Questions and CORRECT Answers
What is the purpose of the Air Blank Step? - CORRECT ANSWER - Purge the sample
chamber with room air
As a result of the Intoxilyzer 9000 monitoring solution temperature, which of the following is
correct? - CORRECT ANSWER - Operators are not required to check the simulator
temperature, Operators may check the temperature, The Intoxilyzer 9000 will auto stop the test if
the temperature falls out of range.
If the simulator is beeping, the paddle is not spinning, or the screen is flashing, reset the
simulator by? - CORRECT ANSWER - Turning it off and back on
If an error message instructs you to contact the technical supervisor what should you do? -
CORRECT ANSWER - Call the technical supervisor immediately
If the Intoxilyzer 9000 stops a test and an error message appears on screen the Operator should? -
CORRECT ANSWER - Call the Technical Supervisor
How do operators stop or abort a test in the middle of the testing sequence on the Intoxilyzer
9000? - CORRECT ANSWER - Double tap the stop button
If a subject refuses to provide a sample and hasn't stated blowing how should the Operator
proceed? - CORRECT ANSWER - Hit the refuse button
During a subject test the Intoxilyzer 9000 detects an Interferant. The Operator should? -
CORRECT ANSWER - Not attempt a re-test instead proceed with a blood sample
For a test to be complete it must contain the following sequence of events: - CORRECT
ANSWER - - All air blanks must be 0.00
, - Subject results 1 and 2 must not differ more than 0.020 g/210L
- Both calibration verification results must be in the acceptable range 0.070-0.090 g/210L
- The reference sample solution temperature of calibration verifications must be in the acceptable
range 33.80-34.20 degrees Celsius
- Test Complete is printed in the sequence of analysis box
- Signature of Operator is included
Alcohol Beverage Component - CORRECT ANSWER - Ethanol Alcohol
Twice the percentage - CORRECT ANSWER - Proof
80 proof - CORRECT ANSWER - 40 percent ethanol
Central Nervous System - CORRECT ANSWER - Depressant
Damages tissue - CORRECT ANSWER - Poison
Alcohol in mouth - CORRECT ANSWER - Residual
Majority of absorption - CORRECT ANSWER - Small intestine
Absorption factor - CORRECT ANSWER - Food
Smaller dose necessary - CORRECT ANSWER - Low body water content
Elimination process - CORRECT ANSWER - Metabolism
Exam Questions and CORRECT Answers
What is the purpose of the Air Blank Step? - CORRECT ANSWER - Purge the sample
chamber with room air
As a result of the Intoxilyzer 9000 monitoring solution temperature, which of the following is
correct? - CORRECT ANSWER - Operators are not required to check the simulator
temperature, Operators may check the temperature, The Intoxilyzer 9000 will auto stop the test if
the temperature falls out of range.
If the simulator is beeping, the paddle is not spinning, or the screen is flashing, reset the
simulator by? - CORRECT ANSWER - Turning it off and back on
If an error message instructs you to contact the technical supervisor what should you do? -
CORRECT ANSWER - Call the technical supervisor immediately
If the Intoxilyzer 9000 stops a test and an error message appears on screen the Operator should? -
CORRECT ANSWER - Call the Technical Supervisor
How do operators stop or abort a test in the middle of the testing sequence on the Intoxilyzer
9000? - CORRECT ANSWER - Double tap the stop button
If a subject refuses to provide a sample and hasn't stated blowing how should the Operator
proceed? - CORRECT ANSWER - Hit the refuse button
During a subject test the Intoxilyzer 9000 detects an Interferant. The Operator should? -
CORRECT ANSWER - Not attempt a re-test instead proceed with a blood sample
For a test to be complete it must contain the following sequence of events: - CORRECT
ANSWER - - All air blanks must be 0.00
, - Subject results 1 and 2 must not differ more than 0.020 g/210L
- Both calibration verification results must be in the acceptable range 0.070-0.090 g/210L
- The reference sample solution temperature of calibration verifications must be in the acceptable
range 33.80-34.20 degrees Celsius
- Test Complete is printed in the sequence of analysis box
- Signature of Operator is included
Alcohol Beverage Component - CORRECT ANSWER - Ethanol Alcohol
Twice the percentage - CORRECT ANSWER - Proof
80 proof - CORRECT ANSWER - 40 percent ethanol
Central Nervous System - CORRECT ANSWER - Depressant
Damages tissue - CORRECT ANSWER - Poison
Alcohol in mouth - CORRECT ANSWER - Residual
Majority of absorption - CORRECT ANSWER - Small intestine
Absorption factor - CORRECT ANSWER - Food
Smaller dose necessary - CORRECT ANSWER - Low body water content
Elimination process - CORRECT ANSWER - Metabolism
