Bicsi Technician Exam UPDATED
ACTUAL QUESTIONS AND CORRECT
ANSWERS
What network topology connects each device on the network to its neighbor device until all
devices are connected - CORRECT ANSWER Hybird
When expanding an existing TR where the wall needs to be removed and has active
equipment and terminations attached the installer will need to - CORRECT
ANSWER Float the wall or rack
What common cabinet configuration providing increased efficiency in heat management is
where - CORRECT ANSWER The hot side of two cabinet rows face each other
What are pulling sheafed used for? - CORRECT ANSWER To assist in the routing of
the cable to the point where it will be pulled to the upper floors
What are the 2 types of EMT couplings used to connect sections together? - CORRECT
ANSWER Compression and set screws
Using company property for business only, being punctual and maintaining confidentiality
are examples of____________ - CORRECT ANSWER Professionalism
Radiating cable standoffs supports should be installed a MINIMUM of ____________ below
the cable tray - CORRECT ANSWER 77mm (3in)
If you are connecting a pul rope to optical fiber without a wire mesh or pulling eye what
should you connect to - CORRECT ANSWER The aramid yarn
To avoid electromagnetic interference in cabling what is the recommended minimum
separation from fluorescent lamps - CORRECT ANSWER 150 mm ( 6in)
ACTUAL QUESTIONS AND CORRECT
ANSWERS
What network topology connects each device on the network to its neighbor device until all
devices are connected - CORRECT ANSWER Hybird
When expanding an existing TR where the wall needs to be removed and has active
equipment and terminations attached the installer will need to - CORRECT
ANSWER Float the wall or rack
What common cabinet configuration providing increased efficiency in heat management is
where - CORRECT ANSWER The hot side of two cabinet rows face each other
What are pulling sheafed used for? - CORRECT ANSWER To assist in the routing of
the cable to the point where it will be pulled to the upper floors
What are the 2 types of EMT couplings used to connect sections together? - CORRECT
ANSWER Compression and set screws
Using company property for business only, being punctual and maintaining confidentiality
are examples of____________ - CORRECT ANSWER Professionalism
Radiating cable standoffs supports should be installed a MINIMUM of ____________ below
the cable tray - CORRECT ANSWER 77mm (3in)
If you are connecting a pul rope to optical fiber without a wire mesh or pulling eye what
should you connect to - CORRECT ANSWER The aramid yarn
To avoid electromagnetic interference in cabling what is the recommended minimum
separation from fluorescent lamps - CORRECT ANSWER 150 mm ( 6in)
