PRACTICE EXAM QUESTIONS
WITH CORRECT DETAILED
ANSWERS | ALREADY GRADED
A+<RECENT VERSION>
1. Identify the materials used for enclosure - answer drywall
Vinyl siding
Plywood
Paneling
Caulk and sealant
2. Hazards that exist in residential environments - answer lead dust
Lead contaminated soil
Peeling, chipping paint
Folk remedies
3. Describe how children are typically exposed to lead - answer hand to
mouth activities
Worker take home dust
4. Identify the common routes of worker lead exposure - answer
inhalation
,5. Describe the basic health effects of lead to workers - answer
stomachache
Nausea
Headache
Memory loss
High blood pressure
Kidney damage
6. Describe the osha ( and other requirements) for lead abatement worker
training - answer info on respirators and their use, types, proper fit
Medical exams for everyone working with lead
Describing what your employer is doing to reduce your exposure to lead
7. Describe the rcra regulations and regulated information regarding waste
disposal for lead abatement projects - answer commercial/ industrial
projects- tested, labeled, hauled correctly
Residential property- household hazardous waste exemption
8. Identify the lead rcra definitions of hazardous waste and testing
procedures - answer tclp test- toxic characteristic leaching procedure
Detects how much lead would leach out of the waste. 5mg/l= hazardous
waste
Lead meets the toxicity part of being a hazardous waste
9. "competent person for health and safety" as defined by osha - answer
a person who can identify hazards
Someone who can take corrective action
10.Osha respirator protection standards relevant to lead abatement work -
answer when above the permissible exposure limit:
Need to wear hepa filter and any other appropriate filter
, Have a written respiratory program in place
11.Osha general industry standards relevant to lead abatement work -
answer similar to the construction rule except: it pertains to exposure
to lead when it is not
Construction
Agriculture
Factory manufacturing
Medical removal is different
Return to work level is different
12.Describe blood monitoring requirements - answer if air monitoring is
above the action level
30ug/m3 for more than 30 days/year
Every 2 months for the first 6 months
If above 40ug/dl then back to every 2 months
At 50ug/dl- medical removal (if 2 consecutive tests)
13.Recognize the correct wording of lead wording signs - answer danger:
lead work area
May damage fertility or the unborn child, cause damage to the central
nervous system, do not eat, drink, or smoke in this area
14.Describe the osha construction standards (other than lead regs) -
answer -fall protection
eye protection
-hazard communication
, -anything having to do with worker protection and construction (including
asbestos)
15.Describe the general requirements specified by the osha construction
standards - answer -train your people
-monitor the air they're breathing (pel is 50ug/m3, al is 30ug/m3)
-take steps to reduce exposure to lead
-do blood monitoring
Keep adequate records
16.Describe the exposure monitoring and written compliance plan
requirements specified by the osha lead in construction standards -
answer -depending on what class work it is, assume a certain exposure
of lead
-adjust respirator after finding out what exposure is
-document what type of work is being done
-exposure below al (30ug/m3) is considered negative assessment. Not
repeated until job conditions change
-if exposure is above pel (50ug/m3) monitor every 3 months
-between 30-50ug/m3, monitor every 6 months
-written compliance plan
17.Exposure assessment schedule when assessment reports levels below al
(30ug/m3) - answer not repeated until job conditions change
18.Exposure assessment schedule if exposure is above pel (50ug/m3) -
answer every 3 months
19.Exposure assessment schedule if exposure is between al (30ug/m3) and
pel (50ug/m3) - answer every 6 months