1
AMMO
AMMO CDC SET B Exam Questions with
Correct Verified Answers Latest
Update (2025/2026) Guaranteed Pass
1. Which action is not an authorized method for securing loose
chain assembly ends?: Wrap the loose ends around the tie-down
device; tape to the device.
2. How do you extend the CGU-1/B strap?: Release the adjusting
mechanism; pull the strap.
3. What should you do if the differential shift lever of the MB-4
aircraft towing tractor is difficult to shift?: Drive forward or
backward a short distance, stop the tractor, and attempt to shift the
lever.
4. Which test set is called the common munitions built-in
test/reprogramming equipment (CMBRE)?: AN/GYQ-79
AMMO
,5. When and where is the MK124 Mod 0 signal used?: Day or
night, land or sea use.
6. After final tighening of the cable-type load binder, verify...:
Threads (more than one) are exposed inside the turnbuckle.
7. What is the MC-7 air compressor designed for?: General
maintenance.
8. After HCU-6/E pallets are positioned on a rollerized trailer, what
can you use to secure the pallets to the trailer?: MB-1 chain
assemblies or tie-down straps.
9. The ADU-891, Adapter Group Computer Test Set, is
used in conjunction with what test set?: AN/GYQ-79
10. In an electrically-timed fuze, what component replaces
the arming vanes used in mechanically timed fuzes?: Electric
charging assembly.
11. What are the basic components of an explosive train?:
Detonator, booster, and a bursting charge.
,12. Which signals are transmitted and received by the AIM-
9M target detector?: Pulsed infrared (IR) energy.
13. What ensures the HCU-6/E pallets transfer smoothly
from a rollerized trailer to an aircraft/K-loader?: An adjustable
ramp.
14. What mortar has a short range and a small explosive
charge?: Light
15. What is the inspection cycle for the UALS replenisher?:
Every 30 days when in use and annually when in storage.
16. Which component of the conveyor assembly transfers
round into the aircraft gun feed system?: Universal aircraft
interface unit.
17. Which component of the munitions assembly conveyor
(MAC) is dissambled last?: Gantry.
18. Which component of the A/E32K-3 MAC can be used as
a forklift adapter to raise the gantry to full height?: Interface
control board (ICB).
, 19. Which component allows the 30 MM armor-piercing
round to achieve target penetration?: Depleted uranium
penetrator.
20. In a bomb body, where is M905 fuze installed?: The tail
fuze well.
21. What components, minimum, make up a propulsion
system?: Rocket motor and rocket motor igniter.
22. In what length is fire wire issued?: 500 feet.
23. Externally, the M129 leaflet bomb is similar to the...:
M117, 750-pound bomb. 35. When can you store powered
equipment in a building with explosives?: Only when stored in
fire-resistive buildings and such equipment is essential to day-to-
day operations.
36. What tool can initiate cycling ammunition through the UALS
replenisher manually?: 1/2-inch speed wrench.
37. What is the arming delay distance for the M505 fuze?: 10-35
feet.
AMMO
AMMO CDC SET B Exam Questions with
Correct Verified Answers Latest
Update (2025/2026) Guaranteed Pass
1. Which action is not an authorized method for securing loose
chain assembly ends?: Wrap the loose ends around the tie-down
device; tape to the device.
2. How do you extend the CGU-1/B strap?: Release the adjusting
mechanism; pull the strap.
3. What should you do if the differential shift lever of the MB-4
aircraft towing tractor is difficult to shift?: Drive forward or
backward a short distance, stop the tractor, and attempt to shift the
lever.
4. Which test set is called the common munitions built-in
test/reprogramming equipment (CMBRE)?: AN/GYQ-79
AMMO
,5. When and where is the MK124 Mod 0 signal used?: Day or
night, land or sea use.
6. After final tighening of the cable-type load binder, verify...:
Threads (more than one) are exposed inside the turnbuckle.
7. What is the MC-7 air compressor designed for?: General
maintenance.
8. After HCU-6/E pallets are positioned on a rollerized trailer, what
can you use to secure the pallets to the trailer?: MB-1 chain
assemblies or tie-down straps.
9. The ADU-891, Adapter Group Computer Test Set, is
used in conjunction with what test set?: AN/GYQ-79
10. In an electrically-timed fuze, what component replaces
the arming vanes used in mechanically timed fuzes?: Electric
charging assembly.
11. What are the basic components of an explosive train?:
Detonator, booster, and a bursting charge.
,12. Which signals are transmitted and received by the AIM-
9M target detector?: Pulsed infrared (IR) energy.
13. What ensures the HCU-6/E pallets transfer smoothly
from a rollerized trailer to an aircraft/K-loader?: An adjustable
ramp.
14. What mortar has a short range and a small explosive
charge?: Light
15. What is the inspection cycle for the UALS replenisher?:
Every 30 days when in use and annually when in storage.
16. Which component of the conveyor assembly transfers
round into the aircraft gun feed system?: Universal aircraft
interface unit.
17. Which component of the munitions assembly conveyor
(MAC) is dissambled last?: Gantry.
18. Which component of the A/E32K-3 MAC can be used as
a forklift adapter to raise the gantry to full height?: Interface
control board (ICB).
, 19. Which component allows the 30 MM armor-piercing
round to achieve target penetration?: Depleted uranium
penetrator.
20. In a bomb body, where is M905 fuze installed?: The tail
fuze well.
21. What components, minimum, make up a propulsion
system?: Rocket motor and rocket motor igniter.
22. In what length is fire wire issued?: 500 feet.
23. Externally, the M129 leaflet bomb is similar to the...:
M117, 750-pound bomb. 35. When can you store powered
equipment in a building with explosives?: Only when stored in
fire-resistive buildings and such equipment is essential to day-to-
day operations.
36. What tool can initiate cycling ammunition through the UALS
replenisher manually?: 1/2-inch speed wrench.
37. What is the arming delay distance for the M505 fuze?: 10-35
feet.
