Category 3 Non-Cab Operated Crane Safety | LATEST UPDATE
Category 3 Non-Cab Operated Crane Safety
COMPREHENSIVE QUESTIONS (Frequently Most Tested) AND
Study online at https://quizlet.com/_6e2n3h
VERIFEID ANSWERS (100% accurate)|GET IT A+
1. A floating crane with a capacity of 200,000lbs. is a Category 1
________________ crane.
2. What is the category of a jib crane with a capacity of Category 3
less than 20,000 pounds?
3. An OET, Bridge crane with a capacity of 80,000lbs. is a Category 2
________________ crane.
4. A commercial truck mounted crane with a capacity of category 4
14,000 lbs. is a __________ crane.
5. What types of power does a Category 1 or 4 crane Electric or hydraulic power
generally use and what is its source? supplied by a diesel en-
gine
6. Load - ________ parts are those that restrain position or controling
control the movement of the load.
7. A hook is what type of component? Load-Bearing Part
8. Hydraulic foot brakes are what type or group of com- Load-Controlling Parts
ponents?
9. Load - _____________ parts are those that support the bearing
load.
10. How is electrical current conveyed from the revolving Through the collector ring
portion of the crane to the lower crane structure? system
11. Safety devices that provide protection for personnel general
and equipment are considered _____________ safety de-
vices.
, Category 3 Non-Cab Operated Crane Safety
Study online at https://quizlet.com/_6e2n3h
12. Safety devices that affect the safe load lifting and operational
handling capabilities of equipment are considered
__________________ safety devices.
13. Which of the following does not affect the safe opera- General Safety Devices
tion of the crane?
14. A travel alarm is what type or group of components?
15. A travel alarm is what type or group of components? General Safety Device
16. During the walk around check you notice a loose bolt Notify your supervisor of
on the crane. You should: the deficiency.
17. The crane Pre-use Check consists of: A walk around visual
check
Performing a "No load"
operational
18. It is the operator's responsibility to report a deficiency false
to the Crane Department.
19. Deficiencies are required to be reported by the end of false
the shift.
20. If the upper limit switch is working correctly, there is fasle
no need to check the lower limit switch.
21. Part of the no load operational check is to ensure the function
proper _________ of all controls.
22. What is the most important reason to do a pre-use To make sure the crane is
check? safe to use.
Category 3 Non-Cab Operated Crane Safety
COMPREHENSIVE QUESTIONS (Frequently Most Tested) AND
Study online at https://quizlet.com/_6e2n3h
VERIFEID ANSWERS (100% accurate)|GET IT A+
1. A floating crane with a capacity of 200,000lbs. is a Category 1
________________ crane.
2. What is the category of a jib crane with a capacity of Category 3
less than 20,000 pounds?
3. An OET, Bridge crane with a capacity of 80,000lbs. is a Category 2
________________ crane.
4. A commercial truck mounted crane with a capacity of category 4
14,000 lbs. is a __________ crane.
5. What types of power does a Category 1 or 4 crane Electric or hydraulic power
generally use and what is its source? supplied by a diesel en-
gine
6. Load - ________ parts are those that restrain position or controling
control the movement of the load.
7. A hook is what type of component? Load-Bearing Part
8. Hydraulic foot brakes are what type or group of com- Load-Controlling Parts
ponents?
9. Load - _____________ parts are those that support the bearing
load.
10. How is electrical current conveyed from the revolving Through the collector ring
portion of the crane to the lower crane structure? system
11. Safety devices that provide protection for personnel general
and equipment are considered _____________ safety de-
vices.
, Category 3 Non-Cab Operated Crane Safety
Study online at https://quizlet.com/_6e2n3h
12. Safety devices that affect the safe load lifting and operational
handling capabilities of equipment are considered
__________________ safety devices.
13. Which of the following does not affect the safe opera- General Safety Devices
tion of the crane?
14. A travel alarm is what type or group of components?
15. A travel alarm is what type or group of components? General Safety Device
16. During the walk around check you notice a loose bolt Notify your supervisor of
on the crane. You should: the deficiency.
17. The crane Pre-use Check consists of: A walk around visual
check
Performing a "No load"
operational
18. It is the operator's responsibility to report a deficiency false
to the Crane Department.
19. Deficiencies are required to be reported by the end of false
the shift.
20. If the upper limit switch is working correctly, there is fasle
no need to check the lower limit switch.
21. Part of the no load operational check is to ensure the function
proper _________ of all controls.
22. What is the most important reason to do a pre-use To make sure the crane is
check? safe to use.
