Ag Test
Screwdrivers are the most common and least misused hand tools. - ✔False
Which of the following is used when there is NOT enough room for a regular
screwdriver? - ✔Standard offset screwdriver
How are screwdrivers sized? - ✔Length of blade
Phillips, reed, and prince screwdrivers are interchangeable. - ✔False
Nut drivers are sized according to the socket size on the end. - ✔True
It is possible to determine the size of a nut driver by the color of the handle. - ✔True
Safety precautions which should be taken when using a hammer include which of the
following? - ✔Both B and C
How much do ball peens weigh? - ✔Four to 12 ounces
Ball peens are heavier then blacksmith hand hammers. - ✔False
If the handles of plies are plastic-coated, electric shock is prevented. - ✔False
Needle nose pliers are mostly used for electrical work. - ✔True
The most common size for slip joint pliers is six inches. - ✔False
Which of the following is a tool used to make the location of a home which is going to be
drilled? - ✔Center punch
A center punch is usually how long? - ✔Four to six inches
A pin punch is used after which of the following? - ✔Starter punch
Which of the following is used to shift parts so corresponding holes align? - ✔Aligning
punch
Most chisels are made of _____ - ✔High carbon steel
When using chisels, you should always ______ - ✔Wear eye protection
The edges of a flat chisel are sharpened to a ______ - ✔None of the above
Screwdrivers are the most common and least misused hand tools. - ✔False
Which of the following is used when there is NOT enough room for a regular
screwdriver? - ✔Standard offset screwdriver
How are screwdrivers sized? - ✔Length of blade
Phillips, reed, and prince screwdrivers are interchangeable. - ✔False
Nut drivers are sized according to the socket size on the end. - ✔True
It is possible to determine the size of a nut driver by the color of the handle. - ✔True
Safety precautions which should be taken when using a hammer include which of the
following? - ✔Both B and C
How much do ball peens weigh? - ✔Four to 12 ounces
Ball peens are heavier then blacksmith hand hammers. - ✔False
If the handles of plies are plastic-coated, electric shock is prevented. - ✔False
Needle nose pliers are mostly used for electrical work. - ✔True
The most common size for slip joint pliers is six inches. - ✔False
Which of the following is a tool used to make the location of a home which is going to be
drilled? - ✔Center punch
A center punch is usually how long? - ✔Four to six inches
A pin punch is used after which of the following? - ✔Starter punch
Which of the following is used to shift parts so corresponding holes align? - ✔Aligning
punch
Most chisels are made of _____ - ✔High carbon steel
When using chisels, you should always ______ - ✔Wear eye protection
The edges of a flat chisel are sharpened to a ______ - ✔None of the above
