CSST Exam Study Prep (Review in
progress... again. 12/3/18) WITH
COMPLETE SOLUTION
It provided: insulation properties, strength and durability from weathering, made spray on
products easier to apply, and does not conduct electricity. - ANS Why was asbestos added to
construction materials ?
Chrysotile : Serpentine , Amosite and Crocidolites : amphiboles. - ANS What are the three
types of asbestos and their associated species?
white , long , curly , hollow - ANS What is the predominant color and structure of Chrysotile
asbestos?
brown / tan ; long and straight - ANS What is the predominant color and structure of Amosite
asbestos ?
blue ; long and straight - ANS What is the predominant color and structure of Crocidolite?
A sprayed on troweled on or otherwise applied to structural surfaces EX: acoustic / decorative
ceilings, fire proofing, textured paints and plasters. - ANS What is the definition of a
Surfacing material ?
applied to pipes, fittings, tanks, other structural, components etc. , to prevent heat loss or gain.
EX: pipe insulation, elbow mud, block insulation, air cell, asbestos paper wrap, preformed
halves, magnesium silica, etc - ANS what is the definition of Thermal Systems Insulation?
material that is not TSI or surfacing but applied to structural components. - ANS what is the
definition of Miscellaneous products:
Friable asbestos will crumble , pulverize or otherwise release dust by applying hand pressure. -
ANS Define Friable vs non friable.
OSHA - because tools that are used by workers can easily make non friable materials friable -
ANS What agency does not use the term friable ? why?
Chrysotile. - ANS Primary type of asbestos used in the U.S ?
,fire doors, fume hoods, felt under roofs or siding, amosite sheeting, kiln bricks and cement, lab
equipment, fire safety and equipment, auditorium curtains, gaskets, vibration joints, etc. - ANS
List three building materials / locations where ACM is likely to be found
Asbestosis, Lung Cancer, Mesothelioma - ANS What are the 3 major illnesses related to
asbestos exposures ?
the time between exposure and symptoms / sign of illness. 10-40 years. - ANS What is a
latency period ? What is the latency period for asbestos related illnesses ?
Paralyzes Cillia in lung. - ANS Why does cigarette smoking increase chances of getting an
asbestos related illness ?
Asbestosis - ANS What asbestos related disease normally appears only after long, large,
occupational exposure to asbestos ?
lung cancer - increases chances over 50 times. - ANS what asbestos related disease
primarily affects those exposed to asbestos who smoke cigarettes?
-Employees who conduct Class I, Class II, and Class III work for more than thirty days.
-Employees who are exposed over the PEL for thirty or more days in a year. - ANS who must
participate in a medical surveillance program
- Before doing the work (pre employment, pre placement)
- Annually
- Upon termination (Cal OSHA requirement) - ANS When are asbestos medical surveillance
physical exams required ?
Occupational History Exam, Chest X ray, Pulmonary Function Test, stool sample - ANS What
should be performed at an asbestos medical surveillance exam ?
no - ANS Is there a safe level of asbestos exposure?
inspection and reinspection requirements, sampling and inspection procedures, lab approval
process, accredited and non accredited training programs, clearance air testing, management
plan requirements, notification requirements. - ANS What are the 7 major components of the
AHERA law ? Whom do they apply ?
3 , 2 , 5 , 4 , 3 - ANS how many days is the required accredited training for a building
inspector , management planner , project supervisor, abatement worker , project designer ?
Maintenance or custodial working in areas where friable ACM is present (2 hour awareness
course) , Maintenance personnel disturbing small amounts of asbestos (2 hours awareness +
, 14 for sixteen hours operations and maintenance training). - ANS When is unaccredited in
house training ok ?
Why was asbestos added to construction materials ? - ANS It was a great insulator and
binder. It added strength and durability against weathering and use. It was non-corrosive, did
not conduct electricity, and made spray-on products easier to apply.
What are the two classes of asbestos and their associated types? - ANS The two classes of
asbestos are Serpentine and Amphiboles.
Serpentine consists of one type: Chrysotile.
Amphiboles consists of five types: Amosite, Crocidolite, Anthophyllite, Tremolite, Actinolite.
Of the different types of Amphiboles, which types were most commonly used commercially? -
ANS Amosite and Crocidolite
What is the predominant color and structure of Chrysotile asbestos ? - ANS white , long , curly
, hollow
What is the predominant color and structure of Amosite asbestos ? - ANS brown / tan ; long
and straight
What is the predominant color and structure of Crocidolite ? - ANS blue ; long and straight
What is the definition of a Surfacing Material? - ANS means material that is sprayed-on,
troweled-on, or otherwise applied to surfaces, such as acoustical plaster on ceilings and
fireproofing materials on structural members, or other materials on surfaces for acoustical,
fireproofing, or other purposes.
What is the definition of Thermal Systems Insulation (TSI)? - ANS means material applied to
pipes, fittings, boilers, breeching, tanks, ducts, or other interior structural components to prevent
heat loss or gain, or water condensation, or for other purposes.
What is the definition of a Miscellaneous Material? - ANS means interior building material that
is not surfacing material or thermal system insulation.
What is the definition of Friable? - ANS means that material, when dry, may be crumbled,
pulverized, or reduced to powder by hand pressure, and includes previously nonfriable materials
after such previously nonfriable material becomes damaged to the extent that when dry it may
be crumbled, pulverized, or reduced to powder by hand pressure.
What is the primary type of asbestos used in the U.S ? - ANS Chrysotile.
progress... again. 12/3/18) WITH
COMPLETE SOLUTION
It provided: insulation properties, strength and durability from weathering, made spray on
products easier to apply, and does not conduct electricity. - ANS Why was asbestos added to
construction materials ?
Chrysotile : Serpentine , Amosite and Crocidolites : amphiboles. - ANS What are the three
types of asbestos and their associated species?
white , long , curly , hollow - ANS What is the predominant color and structure of Chrysotile
asbestos?
brown / tan ; long and straight - ANS What is the predominant color and structure of Amosite
asbestos ?
blue ; long and straight - ANS What is the predominant color and structure of Crocidolite?
A sprayed on troweled on or otherwise applied to structural surfaces EX: acoustic / decorative
ceilings, fire proofing, textured paints and plasters. - ANS What is the definition of a
Surfacing material ?
applied to pipes, fittings, tanks, other structural, components etc. , to prevent heat loss or gain.
EX: pipe insulation, elbow mud, block insulation, air cell, asbestos paper wrap, preformed
halves, magnesium silica, etc - ANS what is the definition of Thermal Systems Insulation?
material that is not TSI or surfacing but applied to structural components. - ANS what is the
definition of Miscellaneous products:
Friable asbestos will crumble , pulverize or otherwise release dust by applying hand pressure. -
ANS Define Friable vs non friable.
OSHA - because tools that are used by workers can easily make non friable materials friable -
ANS What agency does not use the term friable ? why?
Chrysotile. - ANS Primary type of asbestos used in the U.S ?
,fire doors, fume hoods, felt under roofs or siding, amosite sheeting, kiln bricks and cement, lab
equipment, fire safety and equipment, auditorium curtains, gaskets, vibration joints, etc. - ANS
List three building materials / locations where ACM is likely to be found
Asbestosis, Lung Cancer, Mesothelioma - ANS What are the 3 major illnesses related to
asbestos exposures ?
the time between exposure and symptoms / sign of illness. 10-40 years. - ANS What is a
latency period ? What is the latency period for asbestos related illnesses ?
Paralyzes Cillia in lung. - ANS Why does cigarette smoking increase chances of getting an
asbestos related illness ?
Asbestosis - ANS What asbestos related disease normally appears only after long, large,
occupational exposure to asbestos ?
lung cancer - increases chances over 50 times. - ANS what asbestos related disease
primarily affects those exposed to asbestos who smoke cigarettes?
-Employees who conduct Class I, Class II, and Class III work for more than thirty days.
-Employees who are exposed over the PEL for thirty or more days in a year. - ANS who must
participate in a medical surveillance program
- Before doing the work (pre employment, pre placement)
- Annually
- Upon termination (Cal OSHA requirement) - ANS When are asbestos medical surveillance
physical exams required ?
Occupational History Exam, Chest X ray, Pulmonary Function Test, stool sample - ANS What
should be performed at an asbestos medical surveillance exam ?
no - ANS Is there a safe level of asbestos exposure?
inspection and reinspection requirements, sampling and inspection procedures, lab approval
process, accredited and non accredited training programs, clearance air testing, management
plan requirements, notification requirements. - ANS What are the 7 major components of the
AHERA law ? Whom do they apply ?
3 , 2 , 5 , 4 , 3 - ANS how many days is the required accredited training for a building
inspector , management planner , project supervisor, abatement worker , project designer ?
Maintenance or custodial working in areas where friable ACM is present (2 hour awareness
course) , Maintenance personnel disturbing small amounts of asbestos (2 hours awareness +
, 14 for sixteen hours operations and maintenance training). - ANS When is unaccredited in
house training ok ?
Why was asbestos added to construction materials ? - ANS It was a great insulator and
binder. It added strength and durability against weathering and use. It was non-corrosive, did
not conduct electricity, and made spray-on products easier to apply.
What are the two classes of asbestos and their associated types? - ANS The two classes of
asbestos are Serpentine and Amphiboles.
Serpentine consists of one type: Chrysotile.
Amphiboles consists of five types: Amosite, Crocidolite, Anthophyllite, Tremolite, Actinolite.
Of the different types of Amphiboles, which types were most commonly used commercially? -
ANS Amosite and Crocidolite
What is the predominant color and structure of Chrysotile asbestos ? - ANS white , long , curly
, hollow
What is the predominant color and structure of Amosite asbestos ? - ANS brown / tan ; long
and straight
What is the predominant color and structure of Crocidolite ? - ANS blue ; long and straight
What is the definition of a Surfacing Material? - ANS means material that is sprayed-on,
troweled-on, or otherwise applied to surfaces, such as acoustical plaster on ceilings and
fireproofing materials on structural members, or other materials on surfaces for acoustical,
fireproofing, or other purposes.
What is the definition of Thermal Systems Insulation (TSI)? - ANS means material applied to
pipes, fittings, boilers, breeching, tanks, ducts, or other interior structural components to prevent
heat loss or gain, or water condensation, or for other purposes.
What is the definition of a Miscellaneous Material? - ANS means interior building material that
is not surfacing material or thermal system insulation.
What is the definition of Friable? - ANS means that material, when dry, may be crumbled,
pulverized, or reduced to powder by hand pressure, and includes previously nonfriable materials
after such previously nonfriable material becomes damaged to the extent that when dry it may
be crumbled, pulverized, or reduced to powder by hand pressure.
What is the primary type of asbestos used in the U.S ? - ANS Chrysotile.